SKODA OCTAVIA 2010 2.G / (1Z) Bolero Car Radio Manual

Basic setting
19
Cal l li sts a re alwa ys a ss igne d to a us er pr
ofile and are only displayed once the corre-
sponding SIM card is connected agai
n with the mobile phone preparation.
Shortcut keysAt the time of the first connection with the SIM card of your mobile Phone all shortcut keys have st
ill not been assigned after the first call from the
main Setup
PHONE
.
Assigning free shortcut keys – If you press briefly on a non-assigned shortcut key the Setup
Shortcut

will open to enable a name and phone number to be entered.
– If you press the function key , an input mask will open to enable
a name to be assigned.
– If you press the function key a mask will open to enable a
number to be assigned.
– Press the function key or to accept a call number
for these shortcut keys from the corresponding list.
– Press the function key to erase al
l entries in all entry lines at once
after confirmation with .
– If you have completed your entries in the Setup
Shortcut
, press the
function key .
– The entered name will be displayed in the shortcut key of the main
Setup
PHONE
. The call number entered will be assigned to a shortcut
key.
Calling up a connection via the shortcut key –Briefly press an
assigned
shortcut key to establish the connection to
the assigned call number.
Modifying assigned shortcut keys – If the assignment of a shortcut key is to be modified, keep pressing the
corresponding shortcut key until the Setup
shortcut
has opened for
modification.
The assignment of the shortcut keys remains stored in the unit and will only be displayed again when the corresponding SIM card is connected again to the mobile phone preparation program. Shortcut key
6)
The shortcut key has not yet been assigned a call number in the factory, as this depends upon the corresponding mobile phone company and country. The name for this shortcut key has,
however, been specified and cannot be
changed. You should now store your mail
box number so that you can quickly check
your voice mail. Editing field: further input possibilities - changes from upper case to lower case and vice versa. - opens the editing field for the entry
of digits and special characters. The
button changes to . Press on , to change again to the letter editing field.
- space key for entering spaces. or - moves the cursor in the entry line to the left or right. - deletes characters in the entry line from right to left, starting from the position
of the cursor.Phone conversationIf you have started the process
of connecting to a call number or
accepted a call, the main Setup
PHONE
will change to the display
Phone
conversation
.
NameNumber
Call lists
Phone book
OK
OK
6)Only valid for the universal Phone preinstallation GSM III.
Voice mailboxVoice mail box

A-Z
A-Z



s3p4.a.book Page 19 Friday, March 13, 2009 3:04 PM

Basic setting
20
Incoming phone call – An incoming phone call will be indicated on the display by “
Incoming
call
” followed by the call number of the caller. If the number of the
caller is stored in the phone book, the name of the caller will be displayed instead of the call number.
– Press the function key to accept the call. – Press the function key to reject the call. During a phone conversation
7)
– If you press the function key during a phone conversation the
current conversation will be switched to “mute” (Display: “
Call is
held
”). This means that the connection remains intact while the audio
transmission is interrupted.
– If you press the function key ,
again the conversation can be
continued.
– If you press the function key ,
during a phone conversation, the
connection to the current call number will be terminated and the unit will change to the main Setup
PHONE
.
Carrying out an additional phone conversation
7)
– Press on the function key during a phone conversation to put the
current conversation on “hold” as described above.
– Select a new call number or select a stored call number. – If you are holding an additional co
nversation, you can switch between
both parties (“alternate”).
“Call waiting” and changing be
tween two parties (Alternate)
– If you are called while holding a conversation, the number and the
name of the caller will appear below the current conversation on the display (Function: “Call waiting”).
– Press on the function key in the line “
Incoming call
” to reject the
second call.
– Press on the function key in the line “
Incoming call
” to accept the
second call. The connection to the
first party will be interrupted but
not broken (Display: “
Call is held
”).
– If you press the function key in the line “
call is held
”, the conver-
sation with this party will continue
and the other party will be “put on
hold”. In this way you can alternate between two parties.
7)
– Press the function key , to break the connection to the call number
displayed in this line.
DTMF key tones
7)
A particular DTMF key tone is assigned to each each key of a phone. DTMF key tones are used, for example, for the input of a password via the phone or for choosing a colleague in a “Call center”. If a DTMF key tone has to be entered
during a conversation, you can open the
keypad field by pressing the function key
at the bottom left and follow the instruc-
tions (for example: “For a private conversa
tion with one of our co-workers, please
press ”). You can store a longer DTMF key tone on yo
ur mobile phone. If, during a conversa-
tion, this DTMF key tone has to be entere
d, call up the corresponding entry from the
phone book as described. If you press in the input mask on the
function key , the displayed character
sequence in the entry line will be
played as DTMF key tone sequence.
Please note that in a DTMF key tone sequence the character “+” must not appear, as it interrupts the playing of a DTMF key tone.
7)Only valid for the universal Phone preinstallation GSM III.






3
DTMF
s3p4.a.book Page 20 Friday, March 13, 2009 3:04 PM

Škoda Auto pursues a policy of constant product and model development. We trust
that you will understand that changes to models in terms of shape, equipment and
engineering, may be introduced at any time. The information about scope of
delivery, appearance, performances, dimensions, weight, fuel consumption,
standards and functions of the vehicle is only correct at the time of publication.
Certain items of equipment might only be installed later on (information given by
the local authorised Škoda Service Partner) and only envisaged for particular
markets. It is therefore not possible for legal claims to be made based on the data,
illustrations and descriptions contained in this Owner's Manual.Reprinting, reproduction or translation, either in whole or in part, is not permitted
without the written consent of Škoda Auto.
Škoda Auto expressly reserves all rights relating to copyright laws.
We reserve the right to make changes to this document.
Issued by: ŠKODA AUTO a.s.
© ŠKODA AUTO a.s. 2009
Bolero.indd 2Bolero.indd 216.4.2009 8:54:1716.4.2009 8:54:17

SIMPLY CLEVER
www.skoda-auto.com
Autorádio Bolero
Octavia, Yeti anglicky 05.09
S00.5610.64.20
1Z0 012 095 EL
ŠkodaAuto
CAR RADIO BOLERO

Bolero.indd 1Bolero.indd 116.4.2009 8:54:1416.4.2009 8:54:14