width SKODA OCTAVIA 2013 3.G / (5E) Bolero Car Radio Manual

USB input
External devices connected to the USB input can be operated from your device 1)
.
Before removing the USBdevice, proceed as follows:›
Press the button MENU
→  → Remove USB device safely .
Do not use USB extension cables or adapters. This can impair the functioning of
the connected signal source.
USB hubs are not supported.
CAUTION
The AUX input must only be used for audio sources!
Note
■ If an external audio source is connected to the AUX input, which is equipped
with an adapter for external power supply, the sound may be impaired. This de-
pends on the quality of the adapter which is used.
MEDIA IN - input
Fig. 20
MEDIA IN input
First read and observe the introductory information and safety warn-
ings on page 28.
The device allows you to play audio files from an external, device connected to
the MEDIA-IN input.
External sources such as Apple devices, connected to the MEDIA IN input, can be
operated via your device.
Extension cables to connect external sources are available from ŠKODA original
accessories.
Sort tracks from a connected Apple device
› Video
(only available if a red adapter is used) - Video playlists, films, music vid-
eos, TV shows, video podcasts, rented films.
› Music
- Playlists, artists, albums, tracks, podcasts, genres, composers, audio
books.
Video setup › Press the button
MEDIA

→ 
→ Video (iPod) .
■ Screen – Adjust the brightness, contrast, and colour of the video (during play-
back in NTSC standard - option for colour adjustment)
■ Format: - Set the screen width/height ratio
■ AV standard: 2)
- Video standard settings
■ Automatic - Automatic selection of standard
■ PAL - Select the coding standard for the PAL colour signal
■ NTSC - Select the coding standard for the NTSC colour signal
Note
■
Some of the operating options of the Apple device, such as the rating of songs
or the assignment of the title of an “on-the-go” playlists are not supported.■
Some of the operating options of the Apple device or the video playback are
supported only by using an extension cord marked in red.
■
The volume of the external device connected can also be adjusted by setting
the input sensitivity for the MEDIA IN input » page 18, Sound setup . 

1)
Some operating options on an external device may not be supported.
2)
The same standard must be selected in the external source. An incorrectly adjusted AV standard can
result in inadequate playback quality. The unit outputs no picture at all, or only renders it in black and
white.
32Media