SKODA OCTAVIA 2019 Owner´s Manual

vAssign vehicle key to current user account - manual assignment of the detected ve-
hicle key to the active user account - follow the instructions on the Infotain- ment screen

vReset all
- reset the personalisation and the user accounts to factory settings
Unlocking and opening
Unlocking and locking

unlock / lock with the key on the lock cylinderFig. 52
Left side of the vehicle: Turning
the key for unlocking and lock-
ing the vehicle

Locking / unlocking - KESSYFig. 54
Vehicle unlocking / vehicle locking

Locking/unlocking the vehicle with the central locking buttonFig. 55
Central locking button

Doors on a vehicle side
This function enables you to unlock both doors on the driver

Malfunctions

Disable both functions once

CAUTION
vDo not attempt to close the lid manually during electrical motion - there is a
risk of damaging the electric lid operation.
v
Lock the vehicle before driving through a car wash (or with the central lock-
ing button). In some car washes the boot lid might open automatically due to
the pressure action of the washing brushes - there is a risk of damage to the
vehicle interior, as well as to the objects being transported.
CAUTION

v Before opening / closing the flap, check that there are no objects in the
opening / closing area that could damage the flap, and if there are any objects
in the immediate vicinity of the vehicle that could damage the vehicle interior
and the objects being transported.
v
In certain circumstances, if the lid is loaded (e.g. by a thick layer of snow), the
opening process of the lid can be interrupted. Remove the snow from the lid to
re-enable the electrical operation.

v
If the lid closes automatically (e.g. under load of snow), you will hear an inter-
mittent beep.

v
The flap is always to be close before disconnecting the battery.
Description of operationFig. 59
Lid operation

Audible signals
An acoustic signal is sounded when opening/closing the lid by means of the
button C
or
D
.
Note
If you rapidly enter the vehicle during the opening or closing process of the lid,
the whole vehicle may jerk and, as a result, the movement of the lid can be in-
terrupted.
Set the top position of the lid