change language SKODA OCTAVIA TOUR 2010 2.G / (1Z) Symphony Car Radio Manual

Radio
5
First of all the unit attempts to set only alternative frequencies of the selected station. If the quality is however so low, that there is a risk of a “program loss”, the unit also accepts “related” frequencies. When opting for
REG AUTO
the change to a regional “related” station can only be
performed if there is a risk of losing the station. When selecting
REG OFF
, the
receiver can access the regional
“related” stations unlimited.
M/S This function makes it possible that with the aid of the RDS signal, you can automat- ically switch between an optimal pl
ay function for music and language.
PHONE IN* If your vehicle is equipped
with a handsfree system, you
can switch on or off the
monophone play function of the mobile phone calls via the loudspeakers of the vehicle. PH VOL* Set the volume for the play function of the telephone calls. TA VOL Set the volume for the play functi
on of the traffic announcements.
CD SFL If you select
CD SFL D
, the tracks on a CD are replayed in random order. If you select
CD SFL M
, the tracks in the complete magazine
of the external CD changer* are
played in random order. KEY If you select
KEY ON
, the radio switches off after withdrawing the ignition key. If you
select
KEY OFF
, the radio can only be switched on or off with the control button .
LO U D In case of low volume level, the function
reinforces the range of bass and treble
frequencies.
MONO When the reception is bad it switches over to mono operation. LO C If you select
LO C O N
, only stations with the stro
ngest reception are considered
during station finding. If you select
LO C O F F
, stations with weak reception are also
considered during station finding.Radio modeWaveband switch-overYour radio is fitted with the wavebands FM1/AM1 and FM2/AM2, in order to change, press the button for some considerable time.The process of searching for and storing the radio stationsManual search – Set the frequency of the desired radio station by pressing the rocker
switch or .
Automatic station finding SEEK – The radio searches for the next radi
o station in the selected waveband
by pressing the button or .
Function SCAN – The radio stations of the current
waveband are briefl
y played (for 10
seconds) by pressing the button .
– This function is ended by pressing the button once again and the
current station is replayed.
A1
A/F



SCN
SCN
s1tk.book Page 5 Thursday, March 20, 2008 1:56 PM