SKODA RAPID 2016 1.G Blues Infotainment System Navigation Manual

Radio
Operation
Introduction
This chapter contains information on the following subjects: Display
9
Select the frequency range
9
Save radio stations
9
Select radio stations and search
10
The unit allows analogue radio reception of FM and AM frequencies.
CAUTION
■
Car parks, tunnels, tall buildings or mountains can disrupt the radio signal
even causing it to fail completely.■
For vehicles with window antennas do not stick foil or metal coated stickers
to the window as this can lead to interference.
Display
Fig. 4
Radio - Display
Read and observe on page 9 first.
Description of the display » Fig. 4
The selected frequency range
The selected radio station (frequency or identifier)
Status bar
ABCIcons in the status bar CSymbolMeaningManual search of the frequency rangeAutomatic search of the frequency range - Number one position (station buttons) under which the
radio station is storedSound offA traffic information station is availableNo traffic information station is available
Select the frequency range
Read and observe
on page 9 first.
›
Press the  button repeatedly.
Each frequency range has two storage groups each - FM1 and FM2 or AM1 and
AM2 .
Note
If a radio station should broadcast RDS data information in the FM frequency
range, then the name will be shown in the device display instead of the fre-
quency of the broadcasting station.
Save radio stations
Read and observe
on page 9 first.
Storing manually
›
Hold one of the pre-set buttons  - .
The station is stored in the selected position.
Storage is confirmed by an acoustic signal and by displaying the number of the
station button in the status line of the display.
Automatic storage
›
Press the  button.
In the device display the following text appears
AutoStore ...
and in the current
storage group (e.g. FM1), six radio stations are stored with the strongest signal.
9Radio

Select radio stations and searchRead and observe
on page 9 first.
Select radio stations from the list of available stations
The device will automatically search for available radio stations in the back-
ground, which can be selected immediately after turning on the power.
›
Press the  or  button.
There will be a change to the previous or next channel.
Select radio stations from station buttons
By pressing the respective button 
-  it changes to the station stored under
the given position in the current storage group (e.g. as FM1).
Semi-automatic station search
›
Press the  or  button.
A search commences in the selected direction and stops at the next station
with sufficient signal strength.
Manual station search
›
Press the 

Manual
button.
›
Press the  or  button repeatedly and set the desired value of the fre-
quency range.
The value of the frequency range changes by 0.1 MHz on the FM band and 9
kHz in the AM band.
Search available stations (Scan)
›
Press the 

Scan

→  button.
The search is started.
This function plays all the available stations in succession for a few seconds
each.
Pressing the 
button again ends the search and the current station remains
set.
Mode settings
 Introduction
This chapter contains information on the following subjects: Settings
10
TP traffic
10
This chapter describes the settings of the Radio mode and contains informa-
tion about the function of the traffic program (TP).
Settings
›
Press the  button repeatedly.
The following menu items are displayed in sequence.
■
TP
- Sets the traffic news reception
■
Yes
- Traffic news is being received
■
No
- Traffic news is not being received
■
Scan
- Browse available radio stations
■
Press
 - Start the scan
■
Manual
- Manual selection of a radio station
■
Press
 - Start the manual selection
■
Arrow
- Sets station selection (operation of  or  button)
■
Stations
- Select from the list of available stations
■
Pre-sets
- Choice from the station buttons
TP traffic
The function allows the reception of traffic information.
Switching the traffic information station on and off manually
›
Press the 

TP


Yes
/
No
button.
FM frequency range
If the radio station currently selected broadcasts traffic reports, then this will
be shown in the  display. If this does
not transmit any Traffic Information ,
this is then  displayed.
AM frequency range
No traffic reports are broadcast in the AM frequency. 
10Radio

Note■If traffic information is just being broadcast, then Traffic is shown in the de-
vice display.■
Should this radio station not transmit traffic reports or the signal is not avail-
able, then the device automatically searches in the background for another TP
station.
■
During playback in Media mode or a radio station in the AM range, traffic
news is received from the previously selected FM radio station.
Media
Operation
 Introduction
This chapter contains information on the following subjects: Display
11
Playback
12
The device allows you to play audio files from different media and connected
devices (hereinafter referred to only as “audio sources”).
Display
Fig. 5
Media - Display
Description of the display » Fig. 5
Information line
Name of the track being played
Status bar
Symbols in the information line
ASymbolMeaning SD /  USB /  AUXCurrently selected audio sourcePlaylistFolderTitle ABC11Media

Icons in the status bar CSymbolMeaningTrack repeatRepeating the folder / audio source contentsRandom playMute / playback interruption (not valid for AUX)A traffic information station is availableNo traffic information station is available
Playback
The unit will play the contents of the connected audio source by alphabetically
sequenced directory and file name.
Operation using the device buttons
OperationActionPlay / PausePress from 
Fast-forward within the titlePress and hold Fast-reverse within the titlePress and hold Plays the current track from the startPress  (after 3 seconds
after the start of the title playback)Play the previous trackPress  (within 3 sec-
onds after the start of the track playback)Play the next titlePress from Change to/to previous folder/play-list of the cur-
rent audio source a)Press from

Switches to/from the next folder/play-list of the
current audio source a)Press from

a)
The function is not supported by Apple devices.
Audio sources
 Introduction
This chapter contains information on the following subjects: Select audio source
12
SD-card
13
USB input
13
AUX input
14
The device allows you to play audio files in various formats and to connect dif-
ferent source types » page 15.
For an audio source with a split into several areas memory, only the contents
of the first manufactured range is read.
WARNING■ Never place audio sources close to the airbags. They could be thrown into
the passenger compartment when the airbags are deployed, injuring the
occupants.■
Never place audio sources on the dash panel, in your hand or on your
knees. They could be thrown into the passenger compartment during sud-
den driving manoeuvres, thereby injuring the occupants.
■
Always route the connection cable of the audio source such that is does
not restrict you when driving.
CAUTION
Do not store any important data on the connected sources. ŠKODA assumes
no responsibility for lost or damaged files or connected audio sources.
Select audio source
Read and observe
and on page 12 first.
›
Press the  button repeatedly.
The following menu items are displayed in sequence. ■ 
SD
- SD card
■ 
USB
- a USB connected audio source
■ 
AUX
- an audio source connected via AUX
The unit only switches between connected audio sources with playable con-
tent. 
12Media

The device can be connected to the audio sources connected to recognise
max. 1024 directories and play max. 6500 files. The device can play a max 1024
files from a directory.
SD-card
Fig. 6
Blues - Insert the SD card
Read and observe and on page 12 first.
The SD card slot is located on the front of the device » page 6.
Insert the SD card
›
Push the SD card into the available slot with the cut edge to the front right
until it “locks into place”.
Playback starts automatically.
Remove the SD card
›
Press on the inserted SD memory card.
The SD card “jumps” into the eject position.
CAUTION
When using an SD card with an adapter, vehicle vibrations might cause the
card to fall out of the adapter.USB inputFig. 7
Blues - USB input
Read and observe and on page 12 first.
The USB input is in the front centre console and is identified with the symbol
 . The exact location of the input
» Operating Instructions .
The USB input audio source can be connected directly or via a connecting ca-
ble.
Connect the USB audio source
›
Plug the USB audio source into the corresponding well.
Playback starts automatically.
Separate USB audio source
›
Disconnect the USB audio source.
Charge USB audio source
With the ignition on after connecting the USB audio source, the charging proc-
ess is automatically started (applies for audio sources where charging via the
USB connector is possible).
The charging efficiency can be different compared to the charging from the
usual mains power supply. Connected audio sources can be supplied / loaded
with a current of max. 1.0 A.
Some connected audio sources may not be recognised and cannot be charged.
CAUTION
USB extension cords, or reducers may impair the function of the connected au-
dio source. 13Media

NoteWe recommend that you use extension cords from ŠKODA Original Accesso-
ries.
AUX input
Fig. 8
Blues - AUX input
Read and observe and on page 12 first.
The AUX input is located in the centre console and is marked with the lettering
 . The exact location of the input » Operating Instructions .
Connecting AUX audio sources
›
Insert the plug of the audio source in the corresponding well.
›
Press repeatedly the button  and then select the menu


AUX
.
›
Start playback on the connected audio source.
Disconnect AUX audio source
›
Disconnect the connector of the audio source.
CAUTION
■ The AUX input must only be used for audio devices!■If an external audio source is connected to the AUX input, which is equipped
with an adapter for external power supply, the sound will be impaired.
Note
■ The 3.5 mm stereo jack plug is used for the AUX input.■The AUX input can be activated / deactivated » page 14, Settings .■
We recommend that you use extension cords from ŠKODA Original Accesso-
ries.
Settings and advanced functions
 Introduction
This chapter contains information on the following subjects: Settings
14
Supported audio sources and file formats
15
This chapter describes the settings of the Media mode and contains informa-
tion about supported audio sources and file formats.
Settings
›
Press the  button repeatedly.
The following menu items are displayed in sequence.
■
Mix
- switching on / off random play
■
Off
- switches off
■
On
- switches on
■
Repeat
- Repeat playback
■
All
- from the current source
■
Track
- track
■
Folder
- folder
■
TP
- Sets the traffic news reception
■
Yes
- Traffic news is being received
■
No
- Traffic news is not being received
■
AUX
- Enables / disables the AUX input
■
On
- activation
■
Off
- deactivation
■
AUX vol.
- Sets the input level of the AUX audio source (the menu item is avail-
able only with the audio source being connected)
■
Low
- Low volume
■
Middle
- Medium volume
■
High
- High volume
14Media

Supported audio sources and file formats
Supported audio sourcesSourceTypeSpecificationFATSD cardStandard sizeSD, SDHC
FAT16; VFAT; FAT32USB device
USB stick;
HDD (without
special software)USB 1.x; 2.x and
3.x or higher with
support of USB
2.xPortable player (e.g., iPod ®
, iPad ®
, iPhone ®
, MTP player
(MSC))
Supported file formats

File FormatMPEG-1; 2 and 2.5 (Layer-3)Windows MediaAudio 9File suffixmp3wmaMax bit rate320 kbit / s384 kbit / sMaximum sampling rate48 kHz96 kHzPlaylistsm3u; pls; wpl; m3u8; asx
The medium of the GPT standard (GUID Partition Table) in the area of divided
audio sources and files, which are protected with the DRM procedure, and are
not supported by the device.
15Media

Index
A
Adjusting the volume
7
Audio sources12
AUX14
AUX input
14
B
Buttons Device
6
C
Clock
8
D
Description
6
Device display6
Device specification and operation6
Display Media
11
Radio9
Settings8
E
Extras manual search
10
Scan10
F
File Formats
15
Frequency range9
I
Important notes
6
M
Media
11
AUX14
Display11
File Formats15
Operation11
SD-card13
Select audio source12
Settings14
Supported Media15
USB13
Median Playback
12
Memory list9
MFL see operating instructions
7
Multifunction steering wheel see operating instructions
7
O
Operating lever see operating instructions
7
Operation Media
11
Radio9
Settings8
P
Playback (media)
12
R
Radio Display
9
Frequency range9
manual search10
Memory list9
Operation9
Save station9
Scan10
Search for stations10
Select station9
Settings10
TP10
Traffic10
S
Save station
9
Scan10
SD-card13
Search for stations10
Select audio source12
Select station9, 10
Settings Device
8
Display8
Media14
Operation8
Radio10
Sound8
Volume7
Setup8
Sound8
Supported audio sources15
Supported files15
Switching the unit off7
Switching the unit on7
T
Time of day see clock
8
TP10
Traffic10
U
USB
13
USB input13
16Index

V
Volume
7
17Index

18Index