change time SKODA SUPERB 2005 1.G / (B5/3U) SymphonyTape Car Radio Manual

GB
BRIEF OPERATING INSTRUCTIONS
3
Pos. ................................................... Page
1– Control knob/push button ................ 6
– Switch on/off: press the button.
– Volume control: turn the knob.
– Tone control: press the tone control button
2then turn the control knob.
– Tone balance: press the tone balance button
3then turn the control knob.
2– AUD – Tone control button .............. 9 Press the tone control button and turn
the control knob/push button
1to
change the setting.
– 1 pressure: bass control (BASS)
– 2 pressures: treble control (TRE)
3– GEO – Tone balance button .......... 10 Press the tone balance button and
turn the control knob/push button
1to
change the setting.
– 1 pressure: fader (FAD)
– 2 pressures: balance (BAL)
5–
– Dolby® button ........................ 15
Serves for switching on and off the
Dolby® noise reduction system.
Pos. ................................................... Page
7– Autoreverse/ cassette ejection ............................ 15
Brief pressure: autoreverse.
Long pressure: cassette ejection.
9– Cassette compartment ................... 15
ßI– A/F button ........................................ 7Serves for switching between the FM
1/2 and AM 1/2 ranges, or between
CC or CD mode and radio mode.
ß?– TP button ....................................... 12 Briefly pressing this button switches
on the traffic programme functions.Pressing this button a longer time dis-
plays the Setup menu.
ß`– Station search rocker button .......... 14
Briefly press the rocker button to
start a station search cycle in the AM
range.
When in the FM range, you can scroll
through the memory list.
Pos. ................................................... Page
ßQ– AIM button ..................................... 12
The AIM function serves for storing and
playing back traffic announcements.
Playback is started by pressing the AIM
button.
– With the radio switched on, every traffic announcement is recorded.
ßW– C/D button .................................. 7/17Briefly press this source selection
button to change the programme
source with a cassette inserted or a
CD changer connected.
ßR– Station buttons .............................. 13for 12 FM and 12 AM stations.
In CD changer mode, these buttons
serve for selecting the CDs 1 – 6.
ßZ– AS button.......................................... 7This button serves for the automatic
storage of 6 stations in every range.

9
GB
Treble control (TRE)
• "TRE" and the current setting +6 to –6appear in the display.
• Turn the control knob/push button
1to
the left or the right to adjust the desired
setting.
• If you wish to adjust the treble control immediately to its normal setting, press
the AUD button
2until "TRE 00"
appears in the display.
• When this is done, press the AUD button
2again to store the setting.
• To go directly to the treble control mode, press the AUD button
2briefly twice.
RADIO MODE
2– Tone control button
After pressing the AUD button 2, the fol-
lowing indications appear in the display:
• 1 pressure: bass control "BASS",
• 2 pressures: treble control "TRE".
You may change the tone control setting
by turning the control knob/push button
1.
TP
Tone control
Bass control (BASS)
• Press the AUD button
2. "BASS" and
the current setting +6 to –6 appear in the
display.
• Turn the control knob/push button
1to
the left or the right to adjust the desired
setting.
• If you wish to adjust the bass control immediately to its normal setting, press
the AUD button
2until "BASS 00"
appears in the display.
• When this is done, press the AUD button
2again to store the setting.
This will select at the same time the
treble control mode.
2
1

Balance (BAL)
With this function you may adjust the
volume balance of the left/right loud-
speakers.
• "BAL" and the current setting (from LEFT15 via CENTER to RIGHT 15) appear in
the display.
• Turn the control knob/push button
1to
the left or the right to adjust the desired
setting.
• If you wish to adjust the Balance control immediately to its centre setting, press
the GEO button
3until "CENTER"
appears in the display.
• When this is done, press the GEO button
3again to store the setting.
• To go directly to the balance control mode, press the GEO button
3briefly
twice.
3– Tone balance button
After pressing the GEO button 3, the
following indications appear in the display:
• Fader (FAD)
• Balance (BAL)
Turn the control knob/push button
1to
the left or the right to change the desired
setting.
TP
Fader (FAD)
With this function you may adjust the volu-
me balance of the front/rear loudspeakers.
• Press the GEO button
3.
"FAD" and the current setting (from
FRONT 15 via CENTER to REAR 15)
appear in the display.
• Turn the control knob/push button
1to
the left or the right to adjust the desired
setting.
• If you wish to adjust the Fader control immediately to its centre setting, press
the GEO button
3until "CENTER"
appears in the display.
• When this is done, press the GEO button
3again to store the setting. This
will select at the same time the Balance
control mode.
10
Tone balance control
RADIO MODE
1
3

ßWSource selection button
• Briefly press the button ßWto switch bet-
ween the programme sources "FM/AM",
"TAPE" or "CD".
Selecting a CD
• Press one of the station buttons ßRto
change the CD in the magazine. If no CD
is inserted, "NO CD" and the CD number
appear in the display. When the CD is
changed, "LOAD" and the number of the
selected CD appear in the display.
TP
Selecting and repeating a track
• Press on
or of the rocker ß`to
select the CD tracks in the desired direc-
tion. The number of the selected track
appears in the display.
CD play is started automatically.
Playing tracks in random order
• Press a longer time on
or of the
rocker
ß`to switch on the random play
function. "SHFFL" appears in the display.
Press the button
ß`again (long pressure)
to return to normal play. "PLAY" appears
in the display.
Fast forward and reverse
• Press on


or of the rocker ß`to
listen to the tracks in “quick preview”
mode at reduced volume.
Playing tracks for about 8 seconds
• Press the SCN button
´Ito play every
track on a CD for about 8 seconds.
"SCAN" appears in the display. Press the
SCN button
´Iagain to return to normal
play. "PLAY" appears in the display.
Traffic announcements
• Press the button ß?to switch on the traf-
fic announcement standby mode. "TP"
appears in the display. During traffic
announcements, CD play is interrupted.
Press the button
ß?again to abort the
current traffic announcement. "TP" dis-
appears in the display. A new traffic
announcement will be heard again. A
new traffic announcement will be heard
again.
Ending CD play
• Press the C/D buttonßWor the A/F button
ßIto change the programme source. CD
play then is ended.
17
GB
CD CHANGER MODE
11
14