manual radio set SKODA YETI 2014 1.G / 5L Blues Car Radio Manual

As the unit only functions after entering the safety code, this practically excludes
its use after a theft - a contribution to increased anti-theft safety.
Note
The code is stored in the instrument cluster. This ensures that it is automatically
decoded (convenience coding). Manual input of the code is normally not necessa- ry.
Enter code
›
Switch on the radio with the ignition turned on. SAFE is displayed and then
1000 .
›
Use the selection buttons 1 - 4 to enter the safety code.
›
Confirm the safety code by pressing the 6 function button.
If an incorrectly entered code is confirmed, the procedure can be repeated once again.
If the code number is entered incorrectly for the second time, the unit will be
blocked for approx. one hour. It is possible to enter the safety code again after
one hour has expired if both the device and the ignition have stayed turned on
during that time.
The cycle - two attempts, blocked for an hour - will continue to apply.

Device specification and operation
Device specification
Fig. 1
Equipment overview
Setting knob
› for switching the equipment on and off (press)
› for volume control (turn)
› other function settings in various menus
MENU
rocker switch to access a menu for setting the parameters of the de-
vice or CD Player
Rocker switch 
for sound adjustment
Rocker switch AS to automatically store the station
Rocker switch SCAN to activate the AM radio mode
› fast search in the respective waveband
› Scroll through the contents of the CD
CD-eject button
CD case
Button CD
to activate the CD mode
Rocker switch TP to activate the reception of traffic reports
Rocker switch A/F to switch over between the wavebands AM/FM
Rocker switches / and /› manual tuning or switching to the next/previous preset radio station
› Track selection or fast forward/rewind in
CD mode 
12345678910113General information

Radio
Using the system
Change frequency range
Your device is capable of receiving a radio reception in the FM and AM analogue frequency range.
To change the frequency range, press and hold the A/F
rocker switch.
There are two storage groups available for each of these frequency ranges, FM1/
FM2 and AM1/AM2. There are 6 memory slots available for each of these groups.
›
To change the storage group, briefly press the A/F rocker switch.

Searching for and storing radio stations
Manual search
›
Set the frequency of the desired radio station by pressing the rocker switch or
.
Automatic station search
›
The radio searches for the next radio station in the selected waveband by pressing the  or  rocker switch.
Function SCAN
›
The radio station of the current waveband is briefly played (10 seconds) by pressing the rocker switch SCAN.
›
This function is ended by pressing the rocker switch SCAN once again and the
current station is replayed.
Store station
›
By pressing and holding function button
13
, the currently selected station is
stored under the number of the key pressed. Hold the button down until the station briefly switches off and a short signal sounds.
Automatic station finding with storing the radio stations
›
Press the AS rocker switch. Automatic station finding is started during which
the 6 stations with the strongest signal in the memory level FM2 and/or AM2 are stored. STORE will be shown in the display. This applies only to the wave-
bands FM2 and AM2.
When the process of storing the radio stations on the selection buttons 13 is
complete, you can press any selection button 13 to call up the desired radio sta-
tion.
Note
The stored radio stations of the current waveband are updated and stored once
again by repetitively pressing the rocker switch AS.

RDS Function
Certain radio stations transmit additional text information - designated as radio
text.
Note
■ The text information must not be available to all radio stations.■Depending on the quality of the signal, the device may need some time in order
to load all the displayed characters.

Traffic news function
Switching on/off
›
Press the TP switch.
The traffic service is deactivated by pressing the TP
switch again. The displayed
 icon goes out.
Activating/deactivating traffic reports Functional readiness of the traffic news service is indicated via the 
icon.
During playback in Media mode, the last selected radio station that supports traf-
fic news will continue to be received in the background. If a traffic news station
has not been set recently, the most appropriate traffic news station is set auto-
matically in the background. While searching for an appropriate station, TP SEEK
is displayed on the screen.
If the set radio station does not broadcast traffic news, 

is displayed on the
screen.
An incoming traffic report automatically interrupts playback or listening to a radio station that is not currently transmitting traffic news. INFO and station name is
displayed on the screen. Once the traffic news have ended, the device automati-
cally returns to the original playback mode. 
6Radio