radio SSANGYONG KORANDO 2013 User Guide

RadioCD/MP3
2) Display Window
Radio station band: FM1/FM2/AM
FM stereo reception display
EQ: POP/ROCK/COUNTRY/VOICE/JAZZ/
CLASSIC
Receiving broadcasting frequency
Digital clock
Specified station number: P1~P6 1.
2.
3.
4.
5.
6.Disc insertion display
Play mode display
RDM (Random): Play folder in random
order RPT (Repeat): Play folder
repeatedly INT (Intro): Play folder intro
Current folder name
Play disc
Current playing song name
Other information of current playing song:
Play time/album/artist/genre 7.
8.
9.
10.
11.
12.
USB
USB connection
USB play 13.
14.
BT AUDIO
Bluetooth connection 15.

8910-05
Listening radio station
Press the [BAND] button repeatedly to select the desired broadcasting band.
- Select one of FM1, FM2 or AM.
- Broadcasting is received from the broadcasting frequency which has been listening previously. 1.
Searching for broadcasting manually
Turn the [TUNE] dial or press the <> button repeatedly to select the desired broadcasting
frequency.
2.
Searching for broadcasting automatically
Press the <> button more than 2 seconds and release it so that the system searches for one
broadcasting frequency with good reception and receives it automatically.
3.
Selecting broadcasting with automatic search
When pressing the [SCAN] button, the system searches for the broadcasting with good reception
one by one within the receiving frequency range and gives a hearing about for 5 seconds. If you hear
the desired broadcasting, press the [SCAN] button briefly to keep listening it.
4.
Registering broadcasting frequency manually
Select the broadcasting frequency to register.
the beep sounds to indicate the registration is completed. 1.
2.
Registering broadcasting frequency automatically
Press the [BAND] button repeatedly to select the desired broadcasting band.
- Select one of FM1, FM2 or AM.
- The system shows the selected frequency previously in the selected broadcasting band
and receives it.
Press the [AS] button for more than 2 seconds.
- "AST Scanning" is displayed, and the system searches for 6 stations with good reception 1.
2.
Listening registered station
Press the [BAND] button repeatedly to select the desired broadcasting band.
- Select one of FM1, FM2 or AM.
- The system shows the selected frequency previously in the selected broadcasting band
and receives it.1.
2.
7. RADIO SETTINGS

0000-00
Wheel module
The wheel modules are mounted to each wheel rim and hole. They transmit
the signal of the pressure and temperature in tire, rotating direction and
wheel module ID code, etc. using the radio frequency to the TPMS ECU.
TPMS ECU
The TPMS ECU is located to the rear bumper rail under the vehicle. It outputs the tire pressure
information and CAN data.

4170-00
Wheel module
The wheel modules are mounted to each wheel rim and hole. They transmit the signal of the pressure
and temperature in tire, rotating direction and wheel module ID code, etc. using the radio frequency to
the TPMS ECU.
Repair kit
Repair kit changed
Newly added TPMS (Tire Pressure Monitoring System)

4190-00
3. CAUTIONS
The tire pressure values displayed on the instrument cluster are sent from the wheel modules after
the vehicle is driven for a period of time. Therefore, they are not displayed at initial start (more than
20 minutes have elapsed after ignition off). It can be displayed after 10 minutes of driving at speed of
20 km/h or higher. -
The TPMS uses a radio frequency and a high frequency band between the wheel module and the
TPMS ECU for communication.
Therefore, if the vehicle is equipped with the electronic equipment such as mobile camera monitor
or the vehicle is passing through the area with a strong electromagnetic field, the system may not
operate normally.
For the vehicle equipped with the TPMS, the TPMS warning lamp on the instrument cluster comes
on and pressure values on the EL display is displayed as bars (--) after driving for a certain period of
time if a newly installed tire is not equipped with the wheel module. -
-
At initial startDisplay pressure value after
detecting
position automatically
Standard type
Supervision type

7. TIRE INFLATION PROCEDURE FOR VEHICLE WITH TPMS
1) Overview
For the vehicle with TPMS, the tire should be inflated in a method different from the conventional method
since the tire pressure values displayed on the tire pressure gauge and instrument cluster are different
after inflation.
The tire pressure displayed on the instrument cluster should be checked after a certain time delay
(wireless transmission time for wheel module).
The displayed value can be changed after driving even if it was set to the specified value.
2) Tire Inflation Procedure
Park the vehicle on a flat ground and let everyone get off the vehicle. A.
This symptom is occurred as the inflation pressure displayed on the instrument cluster becomes
different by tires as different load is applied to each tire due to driving condition, number of
occupants, irregular temperature change in tire and load condition.
If there is another vehicle equipped with the TPMS, keep the distance from this vehicle for at
least 5 mm to prevent interference of wheel module transmission.
Unload cargoes if they are usually not loaded during driving.
The instrument cluster does not display every pressure change while the air is injected or
discharged to/from the tire. This is because the wheel module sends the pressure value to the
TPMS ECU every minute.
In addition, if there are other vehicles with the TPMS nearby, it might take several minutes to
display the pressure values due to radio jamming and weather condition. -
-
-