USB port SSANGYONG KORANDO 2013 Service Manual

8910-05
1. SPECIFICATION
Unit Item Specification
AudioVoltage DC 14.4 V
Speaker impedance
Max. power 45 watts x 4 ch
Weight 2,244 g
Size 310.4 mm (W) x 275.7 mm (H) x 209 mm (D)
RadioFrequencyFM: 87.5 MHz ~ 108.0 MHz
AM: 531 kHz ~ 1,602 kHz
SensitivityFM: 18 dBu
AM: 35 dBu
S/N ratio
(Signal/noise ratio)FM: 45 db
AM: 40 db
Stereo channel separation
FM: 20 db
MP3 [WMA]/USB Frequency response 20 Hz ~ 20 kHz
S/N ratio
(Signal/noise ratio)60 dB
Channel response 54 dB
MP3 [WMA]/CDFrequency response
S/N ratio
(Signal/noise ratio)50 dB
Channel response 35 dB
BluetoothFrequency 2,402 ~ 2,480 MHz
SpecificationSupports headset, hands-free, A2DP and AVRCP
profile formats
(Headset, hands-free: profile for calling)
(A2DP, AVRCP: profile for listening music)

8910-05
USB & AUX jack
- USB & AUX jack switch arrangement changed
- iPod support function added to USB terminal
USB & AUX jack
USB cable
USB cable length changed due to new instrument panel -
Front & rear feeder cables
Front and rear feeder cables length changed due to new instrument panel -

8910-05
* Connect iPod to USB terminal
- Playing music file in USB memory
- Playing external audio device
through AUX jack
- Supports iPod function
To playback USB/iPod
Press and hold the power button to turn the audio off.
Insert the linking cable of the USB or iPod in which MP3/WMA file to play is stored to the USB
terminal.
Press the [MEDIA] button repeatedly to select the USB or iPod function.
- "USB" or "I-POD" is displayed and the music files which has been played previously are
played automatically. 1.
2.
3.
To use AUX jack
Turn off the external device's power supply and connect its sound output to the [AUX] jack.
Press the [MEDIA] button repeatedly and select the [AUX IN] function.
Turn the [VOL] dial to adjust the sound volume. 1.
2.
3.
10. EXTERNAL DEVICE (USB/AUX & I-POD)
Layout with USB/iPod
USB 2.0 cable

Ensure that the connection or disconnection between the audio system and the USB memory/iPod
is carried out only when the engine is switched off. If the engine is switched on or off while the USB
memory is connected or disconnected, the USB memory may be damaged or not operate normally.
The audio system may not recognize some USB memory depending on the comparability or
condition. Check whether the USB memory operates normally in the vehicle before using it.
Take great care to ensure that the USB connection does not come in contact with the human body
or any object and the USB linking cable does not disturb a safe driving.
When you connect and disconnect the USB memory to the audio system several times in a short
periods, it may cause the USB memory to corrupt. If you particularly disconnect USB memory
during playback, it may be broken or operate incorrectly.
When you use the USB device for charging or heating by using the USB terminal on the audio
system, it may cause the system to deteriorate or fail.
iPod is a registered trademark of Apple Inc.
This audio system supports only the following iPod products: iPod Nano /iPod/iPod Touch/ iPhone.
This audio system may not support some iPod/iPhone products.
Always use the linking cable included with the iPod product when connecting it to the audio system.
The other cables may not be compatible and cause the audio system to fail.
In some cases, the iPod product may be damaged or not operate normally when the engine is
switched on while it is connected to the audio system. When not in use, always disconnect the iPod
product with the engine switched off.
When you use the iPod by connecting it to the audio system, the playback function and information
display may differ from original.
The iPod product can't be recharged using a iPod linking cable. -
-
-
-
-
-
-
-
-
-
-
-Cautions for using USB memory/iPod