Hight SSANGYONG MUSSO 2003 Service Manual

4F-8 ANTILOCK BRAKE SYSTEM
Temperature Model:ABD operation is a high thermal load for the brakes.
To avoid any damages at the brakes, the disk temperature is calculated with a mathematical model for each driven
wheel separately. After ignition on, the calculation starts with 30 °C and then three different phases are evaluated
separately and added: ABD operation, braking and coling phase.If the temperature is highter than 500 °C, ABD is disabled for this wheel.
It is permitted again, if the model has calculated down the 350 °C.
Lamp Concepts: The system is equipped with an ABD information lamp, which is blinking during ABD operation.The activation of the EBD, ABS warning lamp and the ABD info lampo is summarized in the following table:
IgnitionON ABS
Operation ABD
Operation System failure
(EBD,ABS or ABD are
not distinguished) ABD passive due
to temperature
model
ABS warning lamp
ABD info lamp
EBD warning lamp 2s on for lamp
check
2s on for lamp check
2s on for lamp check OFF
EBD operation / OFFOFF
OFF
Dlinking
(Flashing)
OFF ON
OFF ON OFF OFF OFF