SUBARU ASCENT 2020 Quick Guide

8Adaptive Cruise Control (p. 21)
9Multi-Function Display (MFD)
10Windshield Wipers (p. 23)
11SUBARU STARLINK
®Multimedia Touchscreen
12Climate Control System (p. 16)
13CVT Selector (p. 29)
INSTRUMENT PANEL
9

SEATING
Manual Seats
1Forward/Backward:Pull the lever below the
seat up and slide the seat forward or backward.
Release the lever and make sure the seat is
locked into place.
2Seat Height (Driver’s Seat):Pulling up or
pushing down on the lever will raise or lower the
seat cushion.
3Recline Seatback:Pull the lever up to adjust the seatback to the desired position.
Release the lever and make sure the seat is locked into place.
Power Driver’s Seat(if equipped)
1Forward/Backward and Height:Moving the
switch forward or backward will adjust the seat in
that direction. Pulling up or pushing down on the
front or back of the switch will adjust the angle of
the seat cushion. Pulling up or pushing down the
entire switch will adjust the height of the
seat cushion.
2Recline Seatback:Moving the switch
forward or backward will adjust the angle
of the seatback.
3Lumbar Support (if equipped):Pressing
the front of the switch will increase
support. Pressing the rear of the switch
will decrease support.
4Thigh Extension (if equipped):Pull up
on the lever below the seat cushion to
adjust the length.
GETTING COMFORTABLE
10

Memory Driver’s Seat(if equipped)
You can set a seat position and retrieve it using the buttons on the driver’s door or each of
the access key fobs.
To set a seat position with a button:
1. Make sure the select lever is in the “P” position.
2. Adjust the seat to the desired position.
3. While holding the “SET” button, press and hold
either button “1” or “2”. A chirp sounds when the
position is registered.
To retrieve the seat position with a button:
1. Turn the ignition switch to “ON”.
2. While the select lever is in the “P” position, press button “1” or “2”.
To set a seat position with the access key fob:
1. Make sure the select lever is in the “P” position with the parking brake on and the
ignition “OFF”.
2. Adjust the seat to the desired position.
3. While holding the “SET” button, press and hold the unlock button on the access key
fob. A chirp sounds when the position is registered.
To retrieve the seat position with the access key fob:
1. Hold the access key fob.
2. Unlock and open the driver’s door.
Head Restraint Adjustment
Pull the head restraint up to raise it. To lower it, push it
down while pressing the release button on the top of
the seatback. Each head restraint should be adjusted
so that the center of the head restraint is closest to the
top of the occupant’s ears. This adjustment should be
made for any seating position, front or rear, that has a
new occupant.
You can adjust the angle of the front head restraints by tilting them forward. You will hear a
click when the restraint is locked. Pulling the head restraint as far forward as it will go will
allow it to return to the fully upright position.
GETTING COMFORTABLE
11

Seatbelt Adjuster
Always position the seatbelt adjuster so the shoulder
belt passes over the middle of your shoulder without
touching your neck. Pull the adjuster out and slide it
up or down. Release the adjuster and make sure it is
locked in place.
TILT AND TELESCOPIC STEERING COLUMN
Pull the lever down firmly to unlock, then adjust the
height and lengthwise position of the column. Push
the lever firmly back up to lock the column in place.
GETTING COMFORTABLE
12

POWER EXTERIOR MIRRORS
Turn the knob to “L” (left side) or “R” (right side) to
select a mirror. Move the knob in the direction you
want to move the mirror. Return the knob to the
neutral center position.
Power Folding Mirrors(if equipped)
Press the switch to fold the outside mirrors.
Press again to unfold the mirrors.
REAR VIEW MIRROR
Auto-dimming Mirror(if equipped)
When driving at night, the auto-dimming function
senses brightness from vehicle headlights behind you
and automatically dims to reduce glare. Pressing the
switch will turn this function on or off. A green LED
indicator on the switch will illuminate when the
function is on.
HomeLink®5 Accessory Mirror(if equipped)
The HomeLink®5 accessory mirror provides three
buttons to replace up to three hand-held radio
frequency remotes used to activate devices, such as
garage door openers, gate openers, entry door locks,
security systems, and home lighting. For programming
instructions, please refer to the Owner’s Manual or
visit www.subaru.com/homelink to view a how-to
video.
NOTE: HomeLink
®5 may not be compatible with some older door
openers or additional equipment may be required.
GETTING COMFORTABLE
13

Smart Rearview Mirror(if equipped)
Pull the mode lever toward you to show the image
from the camera that is on the rear gate window. Use
when something in your Subaru is blocking your view
out of the rear window. Push the mode lever away
from you to use as a normal mirror.
CABIN VIEW MIRROR(if equipped)
Push gently on the mirror “PUSH” mark and it will
automatically open (eyeglass holder). Push the lid
back up halfway to use the cabin view mirror. Push up
all the way to close the mirror.
POWER WINDOWS
To open or close a window, partially press or pull up
the corresponding switch and hold. The front windows
have a one-touch auto up/down function. The rear
windows may also have auto up/down function. Fully
press down or pull up and release to automatically
open or close the window.
GETTING COMFORTABLE
14

POWER MOONROOF(if equipped)
You can tilt and slide the moonroof.
Opening/Closing the Sunshade
1Opening:Slide the switch rearward and release
to automatically open the sunshade. To stop the
sunshade halfway, slide the switch in either
direction.
2Closing:Slide the switch forward and release to
automatically close the sunshade. To stop the
sunshade halfway, slide the switch in either
direction.
Tilting the Moonroof
Press and hold the moonroof switch to tilt or lower the moonroof.
Opening/Closing the Moonroof
3Opening: Slide the switch rearward and release to open the moonroof. It will stop
slightly before the fully-open position to reduce wind noise. Slide the switch rearward
again and release to fully open it.
4Closing: Slide the switch forward release to close the moonroof. It will stop in the
tilted position. Slide the switch forward and hold to fully close it.
GETTING COMFORTABLE
15

CLIMATE CONTROL SYSTEM
Three-zone Automatic Climate Control
You can set separate temperatures for the driver, front passenger, and rear seats. Set your
desired temperature and let the system automatically make the adjustments for you. At
any time, you can manually take control of the climate settings.
Operation in Automatic Mode
1Automatic Control Button:This system automatically controls all of the climate
system except defogging. Press “AUTO” to activate. Press “OFF” to turn off the
system.
2Temperature Control Dial:Turn the dial clockwise to increase the temperature or
counterclockwise to decrease the temperature. The temperature will appear on the
screen. You can adjust separate temperature settings for the driver’s side and
passenger’s side.
3SYNC Button:Press the button to synchronize the driver’s, passenger’s and rear
temperatures to the driver’s temperature control dial.
When using automatic mode, the fan speed, airflow distribution, air-inlet control and air
conditioning compressor are controlled automatically. To activate:
1. Press the “AUTO” button. The “FULL AUTO” indicator light illuminates on the climate
control display.
2. Set the preferred temperature using the temperature control dial.
If you operate any of the buttons other than “ON/OFF”, rear window defogger, “SYNC”, or
the temperature control dial, the “FULL” indicator light will turn off. The “AUTO” light will
remain illuminated. You can then manually control the system as desired. Press the
“AUTO” button to change back to “FULL AUTO” mode.
GETTING COMFORTABLE
16

Operation in Manual Mode
4Air Conditioner Button:Press this button to activate or deactivate the air
conditioning.
5MAX A/C Button:Press this button for quickest cooling.
6Airflow Mode Selection Button:Press the button to select the desired airflow mode.
The selected mode – ventilation, ventilation 2, bi-level, feet, feet-defrost or defrost – is
shown on the display.
ICON MODE FUNCTION
Ventilation
Instrument panel outlets
Bi-Level
Instrument panel outlets and foot outlets
Ventilation 2
Instrument panel outlets and less foot outlets than bi-level
FeetFoot outlets, both side outlets of the instrument panel and
some through windshield defroster outlets
Feet-DefrostWindshield defroster outlets, foot outlets and both side
outlets of the instrument panel
DefrostWindshield defroster outlets and both side outlets of the
instrument panel
7Fan Speed Control Dial:Turn the fan speed control dial to increase or decrease fan
speed.
8Recirculated/Outside Air Button:Press this button to prevent outside air from
entering your Subaru. Press the button again to allow outside air into your Subaru.
NOTE: To prevent windshield fogging, do not remain in the recirculated mode for an
extended period of time.
9Defroster Button:Press this button to defrost or dehumidify the windshield and front
door windows.
NOTE: The air conditioning may turn on to defrost the windshield more quickly.
However, the indicator on the air conditioner button will not illuminate.
10Rear Window Defogger Button:Press this button to turn on the defogger. It will
automatically turn off after about 15 minutes. If the window clears before then, press
the button again to turn it off. If equipped, the outside mirror defogger and windshield
wiper deicer will also activate. You can customize this function for continuous
operation through the Combination Meter Display (CMD) or the SUBARU STARLINK
®
touch screen.
GETTING COMFORTABLE
17

11Rear Climate Control Button:Press this button to operate the rear climate control
with the front climate control panel. Press the button while the rear climate control is
on. If equipped, press and hold to lock the rear climate control. The lock indicator will
illuminate on the front and rear climate control panels.
12Rear Climate On and Off Button:Press this button to turn the rear climate control
system on or off.
Rear Climate Control Panel(if equipped)
1Temperature Control Button:Press the up or down arrow to increase or decrease
the temperature.
2Fan Speed Control Button:Press the up or down arrow to increase or decrease the
fan speed.
3On/Off Button:Press this button to turn the rear climate control system on or off.
4Airflow Mode Selection Button:Press this button to select the desired airflow mode.
The selected mode — ventilation, bi-level or feet — is shown on the display.
5Automatic Control Button:This system automatically controls all of the rear climate
system. Press “AUTO” to activate. Press “OFF” to turn off the system.
To activate automatic mode:
1. Press the “AUTO” button. The “FULL AUTO” indicator light illuminates on the climate
control display.
2. Set the preferred temperature using the temperature control buttons.
If you use any of the buttons other that the temperature control buttons, the “FULL”
indicator light will turn off. The “AUTO” light remains illuminated. You can then manually
control the system as desired. Press the “AUTO” button to change back to “FULL AUTO”
mode.
GETTING COMFORTABLE
18