wheel bolts SUBARU BAJA 2006 1.G Owners Manual

6-33
Interior and exterior equipments
– CONTINUED –
1) Bolts
3. Remove the two bolts shown in the above drawing
using the wheel nut wrench.
1
UB6069BAUB6070BA

6-35
Interior and exterior equipments
– CONTINUED –
3. Tighten the two bolts shown in the above drawing
by hand and confirm that the hard bed cover is mount-
ed correctly.
4. Take out the wheel nut wrench from the tool bag.
(Refer to “Jack and tools” section in chapter 9.) 5. Tighten the bolts using the wheel nut wrench. The
torque for tightening the bolts is 37 to 66 lbf·ft (50 to 90
N·m, 5 to 9 kgf·m). This torque is equivalent to apply-
ing approximately 39 to 69 lbs (18 to 32 kg) at the top
of the wheel nut wrench provided with your vehicle.
6. Close the front and rear se
ctions of the cover. (Re-
fer to “Opening and closing the hard bed cover” in this section.)
7. Put the wheel nut wrench back in the tool bag. (Re-
fer to “Jack and tools” section in chapter 9.)
UB6073BAUB6074BA