key SUBARU BRZ 2017 1.G Quick Reference Guide

2
Remote keyless entry system
Remote
transmitter key
(if equipped) Access key
(if equipped)
Lock/Unlock doors
basic ope
Ration
All doors and trunk will be locked/unlocked by the following procedures carrying the access
key on your person. (The driver should always carry the access key.)
For detailed operating and safety information, please refer to
your o wner’s Manual.
Keyless access function (if equipped)
1
Locks both side doors
2
The driver’s door will be unlocked.
(To unlock other doors, briefly press the
button a second time within 3 seconds.)
3
Unlocks the trunk lid (press and hold)
4
Sounds the alarm (press and hold)
*Grip the driver’s door handle to unlock the
driver’s door. Grip the passenger’s door
handle to unlock all doors. Side door:
Unlocking the trunk lid:
34
2
1
1
2
3
4
LockUnlock*
Grip
To u c hPress
Lock sensor
(the indentation on the side
of the door handle)
u Some functions are available on certain models.
u For detailed operating and safety information, please refer to your Own\
er’s Manual.

4
start/stop engine
Push-button ignition switch (if equipped)
Engine (ignition) switch (if equipped)
Performing the following operations when carrying the access key on your person starts the
engine or changes push-button ignition switch modes.
Starting the engine;
STEP1: Check that the parking brake is set.
STEP2: Check that the select lever is set in P (AT models).
Check that the shift lever is set in neutral (MT models).
STEP3: Firmly depress the brake pedal (AT models).
Firmly depress the clutch pedal (MT models).
The push button start system indicator light (green) will
turn on.
STEP4: Press the push-button ignition switch.
Stopping the engine;
STEP1: Stop the vehicle (AT models). While depressing the
clutch pedal, stop the vehicle (MT models).
STEP2: Shift the select lever to P (AT models). Shift the shift lever to neutral (MT models).
STEP3: Set the parking brake.
STEP4: Release the brake pedal (AT models). Release the clutch pedal (MT models).
STEP5: Press the push-button ignition switch.
STEP6: Check that the keyless access with push button start system indicator light (green) is off.
Off ( Tu r n e d o f f ) ACC (G r e e n) ON (G r e e n)
Modes can be changed by pressing the push-button ignition switch with the brake
pedal (vehicles with an automatic transmission) or clutch pedal (vehicles with a manual
transmission) released. (The mode changes each time the switch is pressed)
Changing push-button ignition switch mode
LOCK : The steering wheel is locked and the key can be
removed. (Vehicles with an automatic transmission:
The key can be removed only when the select lever
is in P.)
ACC : Some electrical components such as the power
outlet can be used.
ON : All electrical components can be used.
START : The engine can be started.
Flashes slowly
Flashes slowly
0058 Some functions are available on certain models.
00030058 For detailed operating and safety information, please refer to your Own\
er’s Manual.

16
SRS airbag system warning
• Indicates a malfunction in:
• The SRS airbag system;
• The seatbelt pretensioner system;
• The front passenger occupant detection system.
Automatic transmission fluid temperature warning (if equipped)
Indicates that the automatic transmission fluid temperature is too high.
Keyless access with push button start system indicator (if equipped)

Flashing in YELLOW : Indicates a malfunction in the keyless
access with push button start system.
Illumination in GREEN : The keyless access with push button start
system is activated.
Please see the Owner’s Manual for details.
Cruise Control indicator

lllumination in YELLOW : Indicates a malfunction in the cruise
control system.
Illumination in GREEN : The cruise control system is activated.
Please see the Owner’s Manual for details.
Slip indicator
Illumination : Indicates a malfunction in the TR AC/ Vehicle stability control (VSC)
system or the hill start assist system.
Flashing : The TR AC/ Vehicle stability control (VSC) system are operating.
Automatic headlight leveling system warning
Indicates a malfunction in the automatic headlight leveling system.
High engine coolant temperature warning
Indicates that the engine is almost overheating.
As the engine coolant temperature increases,this warning light will change from
flashing to constantly illuminated.
Master warning
The master warning light also comes on or flashes in order to indicate that a
message is currently being displayed on the multi-information display.
u Some functions are available on certain models.
u For detailed operating and safety information, please refer to your Own\
er’s Manual.