steering SUBARU CROSSTREK 2017 1.G Multimedia System Manual
[x] Cancel search | Manufacturer: SUBARU, Model Year: 2017, Model line: CROSSTREK, Model: SUBARU CROSSTREK 2017 1.GPages: 308, PDF Size: 19.33 MB
Page 130 of 308
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
128
No. Function Page
Select to send tones. This button only appears
when a number that contains a (w) is dialed in
hands-free mode.128
Select to hang up the phone. -
Select or to adjust the volume of the
other party’s voice.-
Select to start talking with the other party. 129
NOTE
OWhen cellular phone call is changed to hands-free call, the
hands-free screen will be displayed and its functions can be
operated on the screen.
OChanging between cellular phone call and hands-free call can be
performed by operating the cellular phone directly.
OTransferring methods and operations will be different depending
on the type of cellular phone you have.
OFor the operation of the cellular phone, see the manual that
comes with it.
OTurn the “POWER/VOLUME” knob, or use the volume control
switch on the steering wheel to adjust the volume of the other
party’s voice.
SENDING TONES
BY DIAL PAD
This operation cannot be performed while driving.
1. Select Dial Pad (Dial Pad).
2. Enter the desired number.
BY SELECTING Release Tones (Release Tones)
Release Tones (Release Tones) appears when a
continuous tone signal(s) containing a (w) is registered in
the contact list.
This operation can be performed while driving.
1. Select Release Tones (Release Tones).
Page 131 of 308
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
129
PHONE
4
NOTE
OA continuous tone signal is a character string that consists of
numbers and the characters “p” or “w”. (e.g. 056133w0123p#1 ½)
OWhen the “p” pause tone is used, the tone data up until the
next pause tone will be automatically sent after 2 seconds have
elapsed. When the “w” pause tone is used, the tone data up
until the next pause tone will be automatically sent after a user
operation is performed.
ORelease tones can be used when automated operation of a
phone based service such as an answering machine or bank
phone service is desired. A phone number with continuous tone
signals can be registered in the contact list.
OTone data after a “w” pause tone can be operated on voice
command during a call.
TRANSMIT VOLUME SETTING
1. Select Mic Volume (Mic Volume).
2. Select the desired level for the transmit volume.
3. Select OK (OK).
NOTE
OThe sound quality of the voice heard from the other party’s
speaker may be negatively impacted.
OTo reset the transmit volume, select
Default (Default).
OThe volume cannot be adjusted while muted.
INCOMING CALL WAITING
When a call is interrupted by a third party while talking, this
screen is displayed.
1. Select or press the switch on the steering
wheel to start talking with the other party.
To refuse to receive the call: Select or press the
switch on the steering wheel.
”Select
or press the switch on the steering
wheel to end the current call and return to the
conversation with the party on hold.
Page 132 of 308
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
130
Bluetooth PHONE MESSAGE
FUNCTION
Received messages can be forwarded from the connected
Bluetooth phone, enabling checking and replying using the
system.
Depending on the type of Bluetooth phone connected,
received messages may not be transferred to the message
inbox.
If the phone does not support the message function, this
function cannot be used.
XWithout navigation function
1. Select .
2. Select .
”The phone top screen can be displayed by pressing
the
switch on the steering wheel.
3. Check that the message inbox screen is displayed.
XWith navigation function
1. Select .
2. Select PHONE (PHONE).
3. Select .
”The phone top screen can be displayed by pressing
the
switch on the steering wheel.
Page 135 of 308
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
133
PHONE
4
NOTE
OThe text of the message is not displayed while driving.
OTurn the “POWER/VOLUME” knob, or use the volume control
switch on the steering wheel to adjust the message readout
volume.
REPLYING TO A MESSAGE (QUICK REPLY)
15 messages have already been stored.
1. ' L V S O D \ W K H P H V V D J H L Q E R [ V F U H H Q : 3
2. Select the desired message from the list.
3. Select Quick Message (Quick Message).
4. Select the desired message.
5. Select Send (Send).
”While the message is being sent, a sending message
screen is displayed.
EDITING QUICK REPLY MESSAGES
This operation cannot be performed while driving.
1. Select Quick Message (Quick Message).
2. Select corresponding to the desired message to
edit.
3. Select OK (OK) when editing is completed.
NOTE
OTo reset the editquick reply messages, select Default
(Default).
Page 178 of 308
Bluetooth® SETTINGS
176
Bluetooth® SETTINGS
REGISTERING/CONNECTING
Bluetooth
® DEVICE
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc.
REGISTERING A Bluetooth PHONE FOR
THE FIRST TIME
To use the hands-free system, it is necessary to register a
Bluetooth phone with the system.
Once the phone has been registered, it is possible to use
the hands-free system.
This operation cannot be performed while driving.
<00290052005500030047004800570044004c004f0056000300440045005200580057000300550048004a004c0056005700480055004c0051004a0003004400030025004f005800480057005200520057004b0003004700480059004c00460048001d000301
3a0033>
1. Turn the Bluetooth connection setting of your cellular
phone on.
”This function is not available when Bluetooth
connection setting of your cellular phone is set to off.
XWithout navigation function
2. Select to display the phone top screen.
”Operations up to this point can also be performed by
pressing the
switch on the steering wheel.
XWith navigation function
2. Select and select PHONE (PHONE) to display
the phone top screen.
”Operations up to this point can also be performed by
pressing the
switch on the steering wheel.
3. Select Yes (Yes) to register a phone.
Page 198 of 308
OTHER SETTINGS
196
VOICE SETTINGS
Voice volume, etc. can be set.
1. Select .
2. Select SETTINGS (SETTINGS).
3. Select Voice (Voice).
4. Select the items to be set.
NOTE
O“Voice Settings (Voice Settings)” screen can also be displayed
I U R P W K H Y R L F H U H F R J Q L W L R Q W R S V F U H H Q : 3
VOICE SETTINGS SCREEN
No. Function
Select to adjust the volume of voice guidance.
Select to mute/unmute the navigation voice guidance.
Select to set the voice recognition prompts.
Select to reset all setup items.
NOTE
OThe volume can even be adjusted by turning the “POWER/
VOLUME” knob or by pressing the “+/-” steering switches
: 3 G X U L Q J Y R L F H J X L G D Q F H
Page 203 of 308
BASIC OPERATION
201
NAVIGATION SYSTEM
8
NAVIGATION MENU
When you select Menu (Menu) on the navigation screen,
the navigation menu (main menu) appears. You can access
all of the software’s functions from this menu.
No. Function
Select to start navigation on the map. The button itself
shows the current position, recommended route, and
reduces the surrounding area to display on the map
being used. Select to enlarge the map to full-screen
size.
No. Function
Select to search for a destination. You can select which
method to use to reach your destination by entering the
address, selecting a favorite spot, selecting a position
on the map, or selecting from the destination list. You
can also select recent destinations from Smart History,
or enter coordinates into the system.
Select to perform various route related functions such
as editing or canceling the route, setting the route
departure point, selecting a different route, avoiding a
part of the route, performing a navigation simulation, or
adding an entry to the destination list.
Select to set the navigation software operating method,
start the tutorial, show a demo route simulation, or start
various other auxiliary applications.
Select or to adjust the guidance volume.
Select to mute/unmute the navigation voice guidance.
Select to clear the route and cancel navigation.
6 H O H F W W R R S H Q W K H ³ 7 U D I ¿ F 6 X P P D U \ 7 U D I ¿ F 6 X P P D U \ ´
screen.
NOTE
OGuidance volume can be adjusted during guidance by turning
the “POWER/VOLUME” knob, or by using the volume control
switch on the steering wheel.
Page 251 of 308
Siri
249
Siri/VOICE RECOGNITION SYSTEM
9
USING Siri
STEERING SWITCH
XTy p e A
XTy p e B
Talk switch
”Press and hold the talk switch to start Siri.
”To cancel Siri, press and hold the talk switch.
MICROPHONE
The microphone is built into the map light slits.
”It is unnecessary to speak directly into the
microphone when using Siri.
Siri OPERATION
1. Press and hold the talk switch.
2. Speak when you hear the beep sound.
”If required to say more, the system will notify you with
the beep sound. Continue speaking.
”If the system fails to recognize what is being said, or
to request a different operation, select
, or press
the talk switch.
Page 253 of 308
VOICE RECOGNITION SYSTEM OPERATION
251
Siri/VOICE RECOGNITION SYSTEM
9
VOICE RECOGNITION SYSTEM OPERATION
VOICE RECOGNITION SYSTEM
The voice recognition system enables the navigation,
audio, hands-free systems, etc. to be operated using voice
commands.
Refer to the command list for samples of voice commands.
: 3
USING THE VOICE RECOGNITION SYSTEM
STEERING SWITCH
XTy p e A
XTy p e B
Talk switch
”Press the talk switch to start the voice recognition
system.
”To cancel voice recognition, press and hold the talk
switch or the source switch.
MICROPHONE
The microphone is built into the map light slits.
”It is unnecessary to speak directly into the
microphone when giving a command.
NOTE
O :<0044004c0057000300490052005500030057004b0048000300460052005100bf0055005000440057004c0052005100030045004800480053000300450048004900520055004800030056005300480044004e004c0051004a00030044000300460052005000
500044005100470011>
Page 301 of 308
INDEX
299
APPENDIX/WHAT TO DO IF/INDEX
10
SiriusXM radio data service .......................................................... 166
Fuel information ........................................................................ 172
Sports information..................................................................... 166
Stock information ...................................................................... 171
Weather information ................................................................. 167
SiriusXM
® satellite radio ................................................................. 69
Split screen ..................................................................................... 25
Split screen operation ..................................................................... 47
Customizing ................................................................................ 47
Starting route guidance ................................................................ 219
Canceling .................................................................................. 220
Route simulation ....................................................................... 219
Starting ..................................................................................... 219
Status display ................................................................................. 26
Steering switches ........................................................................... 96
SUBARU STARLINK .................................................................... 153
T
Talking on Bluetooth phone .......................................................... 127
Incoming call waiting................................................................. 129
Sending tones ........................................................................... 128
Transmit volume setting ............................................................ 129
Touch screen gestures ................................................................... 44
Touch screen operation .................................................................. 46
7 U D I