diagram SUBARU FORESTER 1999 Service Repair Manual
[x] Cancel search | Manufacturer: SUBARU, Model Year: 1999, Model line: FORESTER, Model: SUBARU FORESTER 1999Pages: 345, PDF Size: 5.6 MB
Page 69 of 345
2. AT Shift Lock System
A: WIRING DIAGRAM
SU42-04
7
[T2A0]6-2DIAGNOSTICS
2. AT Shift Lock System
Page 86 of 345
G: DIAGNOSTICS CHART FOR
POWER LINE
1. BASIC DIAGNOSTICS PROCEDURE
3G11 : DRIVE AT CRUISE SPEED.
:Can cruise speed be set?
: Go to ªCHECK INDICATOR AND CIR-
CUIT IN CRUISE CONTROL MAIN
SWITCHº.
: Go to ªCHECK CRUISE CONTROL
MAIN SWITCHº.
2. CHECK INDICATOR AND CIRCUIT IN CRUISE CONTROL MAIN SWITCH
DIAGNOSIS:
IBulb failure or open harness of the indicator circuit in the cruise control main switch.
TROUBLE SYMPTOM:
ICruise control can be set, normally indicator does not come on. (When main switch is pressed.)
WIRING DIAGRAM:
S6M0108
24
6-2[T3G1]DIAGNOSTICS
3. Cruise Control System
Page 88 of 345
3. CHECK CRUISE CONTROL MAIN SWITCH
DIAGNOSIS:
IFaulty cruise control main switch, or open harness.
TROUBLE SYMPTOM:
ICruise control main switch is not turned ON and cruise control cannot be set.
NOTE:
When the main relay (built-in cruise control module) operates, the main switch circuit is in normal condi-
tion.
The main relay operation can be checked by hearing the operation sounds.
This operation sounds will be heard when ignition switch and cruise control main switch is turned to ON.
WIRING DIAGRAM:
S6M0108
26
6-2[T3G3]DIAGNOSTICS
3. Cruise Control System
Page 92 of 345
2. DIAGNOSTIC CODE 11 (BRAKE SWITCH, STOP LIGHT SWITCH)
DIAGNOSIS:
IFailure or disconnection of the stop light switch and brake switch.
TROUBLE SYMPTOM:
ICruise control cannot be set.
WIRING DIAGRAM:
S6M0112
30
6-2[T3H2]DIAGNOSTICS
3. Cruise Control System
Page 96 of 345
3. DIAGNOSTIC CODE 12 (CLUTCH SWITCH, INHIBITOR SWITCH)
DIAGNOSIS:
IFailure or disconnection of the clutch switch. (MT)
IFailure or disconnection of the inhibitor switch. (AT)
TROUBLE SYMPTOM:
ICruise control cannot be set.
WIRING DIAGRAM:
S6M0384
34
6-2[T3H3]DIAGNOSTICS
3. Cruise Control System
Page 100 of 345
4. DIAGNOSTIC CODE 13 AND 24 (SPEED SENSOR SYSTEM)
DIAGNOSIS:
IDisconnection or short circuit of vehicle speed sensor (MT model) or transmission control module (AT
model).
TROUBLE SYMPTOM:
ICruise control cannot be set. (Cancelled immediately.)
WIRING DIAGRAM:
S6M0421
38
6-2[T3H4]DIAGNOSTICS
3. Cruise Control System
Page 104 of 345
5. DIAGNOSTIC CODE 14 (SET/COAST SWITCH, RESUME/ACCEL SWITCH, CANCEL
SWITCH)
DIAGNOSIS:
IShort circuit inside the SET SW and RESUME SW.
TROUBLE SYMPTOM:
ICruise control cannot be set. (Cancelled immediately.)
WIRING DIAGRAM:
S6M0123
42
6-2[T3H5]DIAGNOSTICS
3. Cruise Control System
Page 110 of 345
6. DIAGNOSTIC CODE 21, 22 AND 23 (VACUUM VALVE, VENT 2 VALVE, VENT 1 VALVE)
DIAGNOSIS:
IOpen or poor contact of vacuum valve, vent 2 valve and vent 1 valve.
TROUBLE SYMPTOM:
ICruise control cannot be set. (Cancels immediately.)
WIRING DIAGRAM:
S6M0128
48
6-2[T3H6]DIAGNOSTICS
3. Cruise Control System