engine SUBARU FORESTER 2016 SJ / 4.G Driving Assist Manual

EyeSight malfunction and temporary stop
78
Displayed screen Cause Action

In low or high temperatures The system will restart once
the temperature is within the
operational range of the
EyeSight system.
If the system does not
restart, even when the
temperature inside the
vehicle is normal, contact
your SUBARU dealer for an
inspection.

xWhen the EyeSight
system is starting
xWhen the system has
determined that the
vehicle is extremely
inclined
xWhen the pre-collision
secondary braking has
operated 3 times after the
engine was started
xWhen the engine stops
(except for the stop due to
the start stop function).The system will restart once
the cause has been
eliminated. At this time, it
may take some time for the
system to restart.
If the system does not
restart, even after the
conditions have improved
and a period of time has
elapsed, contact your
SUBARU dealer for an
inspection.
NOTE
When a symbol from “E1” to “E3” (EyeSight temporary stop indicators) is
displayed, no EyeSight functions can be used except for Conventional Cruise
Control.
S00863
S00864
EyeSight Disabled
Temp Range
S00865
S00866
EyeSight Disabled
Check Manual

Customizing functions
79
Customizing functions
■How to customize
The customizing function can be operated when the engine is running, the main cruise
control is off (the or indicator is not displayed on the meter) and the select lever
is in the position.
(1) To turn the customization mode on, press the (following distance setting) switch for
approximately 2 seconds or more.
(2) When the (following distance setting) switch is pressed, the item of customization
and the current setting are displayed on the meter display. Every time the switch is
pressed, the item of customization will be changed.
(3) While pressing the RES/+ or SET/- switch,
the setting is changed. (When the setting
is changed, a beep sounds.)
(4) The setting can be determined when the
RES/+ or SET/- switch is released.
(5) To exit from the customizing mode, perform one of the following operations.
xPlace the ignition switch to the ACC or LOCK (OFF) position.
xTurn the main cruise control on.
xShift the select lever to any other position except for the position.Display Item Setting Default setting
Warning volume Max/Mid/Min Mid
Lead vehicle acquisition alert Activate/Deactivate Activate
Lead Vehicle Start Alert Activate/Deactivate Activate
P
S00829S00867
S00867
Max Mid MinEX.: Warning volume setting
P

Customizing functions
80
●Warning volume setting
The warning volume can be set to
Max/Mid/Min.
When the RES/+ or SET/- switch is pressed,
the setting will change to the next and 3 short
beeps will sound in the volume corresponding
to the setting.
●Lead vehicle acquisition alert setting
The lead vehicle acquisition alert function
setting can be activated or deactivated.
When the RES/+ or SET/- switch is pressed,
the setting will change to the next. When the
setting is changed to be activated, a short
beep will sound. When the setting is changed
to be deactivated, no beeps will sound.
●Lead Vehicle Start Alert setting
The Lead Vehicle Start Alert function setting
can be activated or deactivated.
When the RES/+ or SET/- switch is pressed,
the setting will change to the next. When the
setting is changed to be activated, a two-tone
beep will sound. When the setting is changed
to be deactivated, this function is turned off
and no beeps will sound.
NOTE
Even when the engine is restarted after the ignition switch is placed in the
LOCK (OFF) position, the setting will be restored to the previous status
before the ignition switch is placed in the LOCK (OFF) position.
S00869
Setting
Max
Mid
MinDisplay
S00870
Setting
Activate
Deactivate
Display
S00871
Setting
Activate
Deactivate
Display