clock SUBARU FORESTER 2019 Quick Guide

14
Automatic Climate Control System (if equipped)
1
Automatic On and Off
This system automatically controls
outlet air temperature, fan speed, air
flow distribution, air inlet control, and air
conditioner compressor operation. Press
“AUTO” to activate. Press “OFF” to turn
off the system.
2
Temperature Control Dial
Rotate the dial clockwise to increase
the temperature or rotate the dial
counterclockwise to decrease the
temperature and maintain a comfortable
climate within the driver and passenger
compartment. The temperature is
displayed digitally on the screen.




Operation in Manual Mode
3
Recirculated/Outside Air Button
Press the air inlet selection button to
prevent outside air from being drawn
into the passenger compartment. Press
the button again to allow outside air
into the compartment. TO PREVENT
WINDSHIELD FOGGING, DO NOT
REMAIN IN THE RECIRCULATED MODE
FOR AN EXTENDED PERIOD OF TIME
4
Fan Speed Control Knob
Rotate the fan speed control
knob to select the desired fan speed.
5
Air Flow Mode Selection Dial
Turn the “MODE” dial to select the
desired air flow mode. The selected
air flow mode – either ventilation, bi-level,
heat or heat-defrost – is shown on
the display.
Controls
1
3
4
5
8
2
796
3495150_19a_Subaru_Forester_QRG_070318.indd 147/3/18 1:07 PM

16
Controls
Dual Zone Automatic Climate Control System (if equipped)
1 Automatic On and Off
This system automatically controls
outlet air temperature, fan speed,
air flow distribution, air inlet control,
and air conditioner compressor
operation. Press “AUTO” to activate.
Press “OFF” to turn off the system.
2 Temperature Control Dial
Rotate the dial clockwise to increase
the temperature or rotate the dial
counterclockwise to decrease the
temperature and maintain a comfortable
climate within the driver and passenger
compartment. The temperature is
displayed digitally on the screen.

Separate temperature settings
can be adjusted for the driver’s
side and passenger’s side.
Operation in Manual Mode
3 Recirculated/Outside Air Button
Press the air inlet selection button to
prevent outside air from being drawn
into the passenger compartment. Press
the button again to allow outside air
into the compartment. TO PREVENT
WINDSHIELD FOGGING, DO NOT
REMAIN IN THE RECIRCULATED MODE
FOR AN EXTENDED PERIOD OF TIME.
4 Fan Speed Control Knob
Rotate the fan speed control knob
to select the desired fan speed.
5 Air Flow Mode Selection Button
Press the “MODE” button to select the
desired air flow mode. The selected
air flow mode – either ventilation,
ventilation 2, bi-level, heat, heat-defrost,
or defrost – is shown on the display.
1
9
3
8
10
4
7
56
22
3495150_19a_Subaru_Forester_QRG_070318.indd 167/3/18 1:07 PM