maintenance SUBARU LEGACY 1997 Service User Guide

B: USING A SUBARU SELECT MONITOR
With this testing procedure the defective component can be
determined by directly monitoring input/output signals of the
ECM or the trouble codes.
1. FEATURES

A variety of data can be checked without movements from
the drivers seat, passenger’s seat or from outside the vehicle.

This unit allows the identification of the type of malfunction,
for example whether the cause is an open or shorted wire in
the input/output signal line, or whether the breakdown of a
component is caused by a lack of maintenance.
2. DIAGNOSIS

Refer to the reference values for input/output and control
data to determine whether the malfunction is caused by a
worn out component, an open wire, a short etc.

Perform the diagnostics procedure as described in chapter
“Check based on trouble codes”by monitoring the trouble
codes.
NOTE:
It will be easier to determine a malfunction if the vehicle data
for normal conditions are available for comparison.
G2H0054
3. CONNECT SELECT MONITOR.
1) Connect select monitor to data link connector located
under instrument panel. (on driver’s side)
G3M0150
2) Insert cartridge into select monitor.
10
FOREWORD [T4B0]FOREWORD
4. Diagnosis and Checking Procedure Using Instruments

Important safety notice

Providing appropriate service and repair is a matter of great importance in the serviceman’s safety maintenance
and safe operation, function and performance which the SUBARU vehicle possesses.

In case the replacement of parts or replenishment of consumables is required, genuine SUBARU parts whose
parts numbers are designated or their equivalents must be utilized.

It must be made well known that the safety of the serviceman and the safe operation of the vehicle would be
jeopardized if he used any service parts, consumables, special tools and work procedure manuals which are
not approved or designated by SUBARU.
All right reserved. This book may not be reproduced
or copied, in whole or in part, without the written
permission of FUJI HEAVY INDUSTRIES LTD.,
TOKYO JAPAN.
SUBARU,
andare trademarks of
FUJI HEAVY INDUSTRIES LTD.
© Copyright 1996 FUJI HEAVY INDUSTRIES LTD.
2