display SUBARU OUTBACK 2016 6.G Navigation Manual
[x] Cancel search | Manufacturer: SUBARU, Model Year: 2016, Model line: OUTBACK, Model: SUBARU OUTBACK 2016 6.GPages: 308, PDF Size: 11.2 MB
Page 248 of 308
SETUP
246
No. Function
Displays service area information while driving on the
expressway. Select to turn this function on and off.
Select to select the service area information display
items.
When information is available, lane information similar to
<0052005900480055004b004800440047000300550052004400470003005700550044004900bf004600030056004c004a005100560003004c005600030047004c00560053004f0044005c0048004700030044005700030057004b0048000300570052005300
030052004900030057004b00480003>
map. Select to turn this function on and off.
When approaching an expressway exit or a complicated
intersection, the map switches to a 3D display if the
necessary information can be displayed. Select to turn
this function on and off.
Select to turn on the route progress bar which is
displayed as a straight line to the left of the map. This
shows the progress made on the current route. When
a blue arrow is used to indicate position, the arrow
continues to rise as you drive towards your destination.
: D<005c00530052004c00510057005600030044005100470003005700550044004900bf004600030046005200510047004c0057004c005200510056000300440055004800030047004c00560053004f0044005c0048004700030052005100030057004b004800
03>
line.
Page 249 of 308
TIPS FOR THE NAVIGATION SYSTEM
247
NAVIGATION SYSTEM
8
TIPS FOR THE NAVIGATION SYSTEM
GPS (GLOBAL POSITIONING
SYSTEM)
REGARDING ERRORS IN CURRENT
POSITION DISPLAY
The system displays the vehicle current position based on
GPS information and data from various sensors and road
maps. However, when the radiowave signals from GPS
satellites are weak or when signals are received from only
two satellites or less, errors may occur in the position.
Modifying or adjusting the system will not prevent these
errors.
LIMITATIONS OF THE NAVIGATION SYSTEM
This navigation system calculates the current position using
satellite signals, various vehicle signals, map data, etc.
However, an accurate position may not be shown depending
R Q V D W H O O L W H F R Q G L W L R Q V U R D G F R Q
Page 250 of 308
TIPS FOR THE NAVIGATION SYSTEM
248
CAUTION
OThe installation of window tinting may obstruct the GPS
signals. Most window tinting contains some metallic content
that will interfere with GPS signal reception of the antenna in
the instrument panel. We advise against the use of window
tinting on vehicles equipped with navigation systems.
”Accurate current position may not be shown in the
following cases:
‡ When driving on a small angled Y-shaped road.
‡ When driving on a winding road.
‡ When driving on a slippery road such as in sand,
gravel, snow, etc.
‡ When driving on a long straight road.
‡ When freeway and surface streets run in parallel.
‡ After moving by ferry or vehicle carrier.
‡ When a long route is searched during high speed
driving.
‡ After repeating a change of direction by going
forward and backward, or turning on a turntable in
a parking lot.
‡ When leaving a covered parking lot or parking
garage.
‡ When a roof carrier is installed.
‡ When driving with tire chains installed. ‡ When the tires are worn.
‡ After replacing a tire or tires.
‡ When using tires that are smaller or larger than the
I D F W R U \ V S H F L ¿ F D W L R Q V
‡ When the tire pressure in any of the 4 tires is not
correct.
”Inappropriate route guidance may occur in the
following cases:
‡ When turning at an intersection off the designated
route guidance.
‡ If you set more than 1 destination but skip any of
them, auto reroute will display a route returning to
the destination on the previous route.
‡ When turning at an intersection for which there is
no route guidance.
‡ When passing through an intersection for which
there is no route guidance.
‡ During auto reroute, the route guidance may not be
available for the next turn to the right or left.
‡ During high speed driving, it may take a long time
for auto reroute to operate. In auto reroute, a detour
route may be shown.
‡ After auto reroute, the route may not be changed.
‡ If an unnecessary U-turn is shown or announced.
Page 256 of 308
Siri
254 ”If required to say more, the system will notify you with
the beep sound. Continue speaking.
”If the system fails to recognize what is being said, or
to request a different operation, select
, or press
the talk switch.
”To cancel Siri, select
Cancel (Cancel), or press and
hold the talk switch.
NOTE
OSiri cannot be started while placing or receiving hands-free
calls with your iPhone and iPod touch (including while holding
incoming calls), or while having a hands-free conversation.
OSiri cannot be used while using the system's voice recognition
function. Start Siri after exiting the voice recognition function.
OThe system screen will display the calling screen when a hands-
free call is placed.
OUnit operation while using Siri will differ depending on your
iPhone or iPod touch.
OSiri may not recognize what is being said if:
‡ Spoken too quickly.
‡ Spoken at a low or high volume.
‡ Driving with a window open.
‡ Passengers are talking while using Siri.
‡ The air conditioning speed is set high.
‡ When air from the ventilator blows directly toward the
microphone.
NOTE
OIn the following conditions, the system may not recognize what is
being said properly, and use of Siri may not be possible.
‡ What is being said is incorrect or unclear. Note that certain
Z R U G V D F F H Q W V R U V S H H F K S D W W H U Q V P D \ E H G L I
Page 260 of 308
VOICE RECOGNITION SYSTEM OPERATION
258
NOTE
OWhile the recognition data is being created or being updated, a
track search cannot be performed using a voice command.
VOICE COMMAND EXAMPLE: CALL NAME
1. Press the talk switch.
2. Say “Call
”If multiple matching items are found, a selection
screen will be displayed. Say “
the number.
NOTE
OIn the same manner as it is displayed on the screen, “Call
after saying “Call a contact” say the name, or the name and
type of phone, of a contact.
For example: “Call a contact”, “John Smith” or “Call a
contact”, “Mary Davis”, “Mobile”
OThere are 4 types of phones: Home, Mobile, Work and Other.
OShort or abbreviated names in the contacts list may not be
recognized. Change names in the contacts list to full names.
O 6 R P H W L P H V D Y R L F H U H F R J Q L W L R Q U H V X O W F R Q
Page 263 of 308
COMMAND LIST
261
Siri/VOICE RECOGNITION SYSTEM
9
COMMAND LIST
Recognizable voice commands and their actions are shown
below.
”Frequently used commands are listed in the following
tables.
”For devices that are not installed in the vehicle, the
related commands will not be displayed in the screen.
Also, according to conditions, other commands may
not be displayed in the screen.
”The functions available may vary according to the
system installed.
”Voice recognition language can be changed.
: 3
NOTE
OThe notations used in the commands are as follows.
‡ >||| @ & R P P D Q G V W K D W Q H H G Q R W W R E H V S R N H Q
‡ ½||| ¾ 1 X P E H U V W L W O H V R U Q D P H V W R E H V S R N H Q
XBasic command
Voice command Phrase Function
System pause pausePause the current
voice interaction
System back [go] backGo back one
hierarchy
System cancel cancelCancel the current
task
System help helpAsk for help with
the current task
System start over start overStart the current
task over
Page change ¿ U V W S D J H O D V W
page, previous
page, next pageChange display
page
Page 265 of 308
COMMAND LIST
263
Siri/VOICE RECOGNITION SYSTEM
9
XCommands for Hands-free
Voice command Phrase Function
Redialredial, call again, dial
againPlaces a call to the
phone number of
the latest outgoing
call
Call backcall back, return phone
callPlaces a call to the
phone number of
latest incoming call
Recent calls [show] recent callsDisplays the call
history screen
Dial number
callingcall
dial
the said phone
number
Call by name
and typecall
dial
said phone type of
the contact from
the phone book
List messagelist messages, list
messagesDisplays e-mails
Call call
This can be used
when receiving
messages Ignore ignore
Read read
Reply reply
XCommands for Pandora*
*: Pandora is available in the United States, Australia, and New Zealand.
Voice command Phrase Function
Pandora mode
changeplay Pandora stationsSwitch to Pandora
mode
List Pandora
stationslist Pandora stationsList Pandora
stations
Thumb up like, thumbs up 0 D U N ³ / L N H ´ À D J
Thumb down dislike, thumbs down 0 D U N ³ ' L V O L N H ´ À D J
and skip to the
next song
XCommands for aha
Voice command Phrase Function
aha mode
changeplay aha stationsSwitch to aha
mode
List aha stations list aha stations List aha stations
Like on/offlike/unselect like,
thumbs up/unselect
thumbs up 0 D U N ³ / L N H ´ À D J
Unmark it
Page 272 of 308
COMMAND LIST
270
Voice command Phrase Function
History > ¿ Q G @ > L Q @ K L V W R U \Sets the
destination from
the search history
results
Less lessReduces the
detour distance set
(on the avoid route
screen)
Line 1[line] 1 Selects the item
O L V W H G L Q W K H ¿ U V W
line of the list
(on the screen
where the list is
displayed) ¿ U V W > O L Q H @
Line 2[line] 2Selects the item
listed in the
second line of the
list (on the screen
where the list is
displayed) second [line]Voice command Phrase Function
Line 3[line] 3Selects the item
listed in the third
line of the list
(on the screen
where the list is
displayed) third [line]
Line 4[line] 4Selects the item
listed in the fourth
line of the list
(on the screen
where the list is
displayed) fourth [line]
Middle[go, jump, move, scroll]
[to] [the] middleTransits to the
middle of the list
(on the screen
where the list is
displayed)
More moreTransits to the
information list
reception screen
Page 278 of 308
![SUBARU OUTBACK 2016 6.G Navigation Manual
COMMAND LIST
276
Voice command Phrase Function
To p[go, jump, move, scroll]
[to] [the] topTransits to the top
of the list (on the
screen where the
list is displayed)
Up [page, scroll, move] upMov](/img/17/7312/w960_7312-277.png "SUBARU OUTBACK 2016 6.G Navigation Manual
COMMAND LIST
276
Voice command Phrase Function
To p[go, jump, move, scroll]
[to] [the] topTransits to the top
of the list (on the
screen where the
list is displayed)
Up [page, scroll, move] upMov")
COMMAND LIST
276
Voice command Phrase Function
To p[go, jump, move, scroll]
[to] [the] topTransits to the top
of the list (on the
screen where the
list is displayed)
Up [page, scroll, move] upMoves the list one
page up (on the
screen where the
list is displayed)
Waypoint waypointRegisters
the selected
destination as a
relay point
Where am I where am IDisplays the
vehicle position
information (When
there is a self-car
location in the
location besides
the road, this
function can’t be
used.)Voice command Phrase Function
Ye syes
Accepts questions
or other contents
spoken to you yep
yeah
*: Searches for candidates close to your vehicle’s position.
”Commands on the touch screen that cannot be
operated have their colors toned down.
Page 293 of 308
WHAT TO DO IF
291
APPENDIX/WHAT TO DO IF/INDEX
10
XWhen using the Bluetooth message function
Symptom Likely cause SolutionPage
Cellular
phoneThis
system
Messages cannot be viewed.Message transfer is not enabled on
the cellular phone.Enable message transfer on the
cellular phone (approve message
transfer on the phone).*-
Automatic transfer function on this
system is set to off.Set automatic transfer function on
this system to on.- 142
1 H Z P H V V D J H Q R W L ¿ F D W L R Q V D U H Q R W
displayed. 1 R W L ¿ F D W L R Q R I 6 0 6 0 0 6 ( P D L O
reception on this system is set to off. 6 H W Q R W L ¿ F D W L R Q R I 6 0 6 0 0 6 ( P D L O
reception on this system to on.- 142
Automatic message transfer function
is not enabled on the cellular phone.Enable automatic transfer function on
the cellular phone.*-
*: For details, refer to the owner’s manual that came with the cellular phone.