ECO mode SUBARU OUTBACK 2016 6.G Navigation Manual

RADIO OPERATION
75
AUDIO
3
No. Function
Fast forwards continuously.
The fast forward speed increased the longer the button
is held down.
Select to access the desired program.
Skips forward through program.
Returns to the live radio broadcast.
Shows the current playback location relative to the
cached broadcast recording time with a bar scale.
NOTE
OThe time displayed on the bar scale may differ from the actual
time.
REGISTERING A SMART FAVORITE
CHANNEL
The TuneStart and TuneScan functions can be used by
registering preset channels as Smart Favorites. Up to 5
channels can be registered in Smart Favorites.
1. Select Smart Favs Setup (Smart Favs Setup) on the
option screen.
2. Select check boxes for preset channels to be
registered, and then select
OK (OK).
TuneStartTM FUNCTION
TuneStart begins playing the current program from the
beginning when tuning to a channel registered in Smart
Favorites, allowing you to enjoy the complete program.
TuneStart is applicable to channels registered in Smart
)DYRULWHV
:3
It is necessary to turn on TuneStart at the option screen to
XVHWKLVIXQFWLRQ
:3
NOTE
OLive radio is broadcast immediately after switching from another
mode to SiriusXM mode even if the TuneStart setting is turned
ON. The TuneStart function starts if switching to a channel
registered in Smart Favorites within SiriusXM mode.
OThe TuneStart function is not applicable to programs for which
even a little has been listened to from the start.

MEDIA OPERATION
86
No. Function
Select to set repeat playback.
The random playback method changes as shown below
each time the random button is selected.
: The tracks contained within the list
currently playing will be played in
random order.
: The albums contained within the list
currently playing will be played in
random order.
: Random playback is disabled.

Select to display the play mode selection screen.
‡“Artists (Artists)”/“Albums (Albums)”/“Songs
(Songs)”/“Playlists (Playlists)”/“Genres
(Genres)”/“Composers (Composers)”/“Audiobooks
(Audiobooks)”/“Podcasts (Podcasts)”/“Videos (Videos)”
are on the play mode selection screen.
To return to the top screen, select
Now Playing (Now
Playing) on the list screen.
WARNING
ODo not operate the player’s controls or connect the iPod while
driving.
CAUTION
ODo not leave your portable player in the car. In particular, high
temperatures inside the vehicle may damage the portable
player.
ODo not push down on or apply unnecessary pressure to the
portable player while it is connected as this may damage the
portable player or its terminal.
ODo not insert foreign objects into the port as this may damage
the portable player or its terminal.
NOTE
OWhen an iPod is connected using a genuine iPod cable, the iPod
starts charging its battery.
OIf playing iPod music, perform operation at the system. Certain
functions may not be available if played directly from the
iPod. Furthermore, depending on the connected iPod, certain
functions may not be available.
ODepending on the iPod and the songs in the iPod, iPod cover
art may be displayed. This function can be changed to on/
RII 
:3  ,W PD\ WDNH WLPH WR GLVSOD\ L3RG FRYHU DUW DQG
the iPod may not be operated while the cover art display is in
process.
OWhen an iPod is connected and the audio source is changed to
iPod mode, the iPod will resume playing from the same point it
was last used.
OTracks selected by operating a connected iPod may not be
recognized or displayed properly.

AUDIO/VISUAL REMOTE CONTROLS
96
AUDIO/VISUAL REMOTE CONTROLS
STEERING SWITCHES
Some parts of the audio/visual system can be adjusted
using the switches on the steering wheel.
No. Switch
“+/-” switch
“/ ” switch
Mute/enter switch
Back switch
List switch
“Source” switch
X“+/-” switch
Mode Operation Function
VolumePress Volume up/down
Press and hold Volume up/down continuously
List screen Press Cursor up/down
X“/ ” switch
Mode Operation Function
AM/FM Radio,
SiriusXM
®
Press Preset channel up/down
Press and hold Seek up/down continuously
ahaPress Content up/down
Press and holdRewind the current content
item for 15 seconds/ Fast
forward the current content
item for 30 seconds

TIPS FOR OPERATING THE AUDIO/VISUAL SYSTEM
106
USB MEMORY

”USB communication formats: USB 2.0 HS (480
Mbps) and FS (12 Mbps)

”File formats: FAT 16/32

”Correspondence class: Mass storage class
iPod
The following iPod®, iPod nano®, iPod classic®, iPod
touch® and iPhone® devices can be used with this system.
Made for

”iPod touch (5th generation)

”iPod touch (4th generation)

”iPod touch (3rd generation)*

”iPod touch (2nd generation)*

”iPod touch (1st generation)*

”iPod classic

”iPod with video*
”iPod nano (7th generation)

”iPod nano (6th generation)

”iPod nano (5th generation)

”iPod nano (4th generation)

”iPod nano (3rd generation)

”iPod nano (2nd generation)*

”iPod nano (1st generation)*

”iPhone 5

”iPhone 4S

”iPhone 4*

”iPhone 3GS*

”iPhone 3G*

”iPhone*
*: The voice recognition system not supported

”Depending on differences between models or
software versions etc., some models might be
incompatible with this system.

”iPod video is not supported.

”For USA customers, please visit www.subaru.com for
details. Outside of the USA customers, contact your
local dealer to arrange a demonstration in order to
FRQ

TIPS FOR OPERATING THE AUDIO/VISUAL SYSTEM
11 0
COMPATIBLE COMPRESSED FILES (Video)
XVideo Codec
File Type3UR¿OH
WMV9WMV
AV I‡ 6LPSOH3UR¿OH
‡ 0DLQ3UR¿OH
‡ $GYDQFHG3UR¿OH
MPEG4AV I
MPEG4‡ 6LPSOH3UR¿OH
‡ $GYDQFHG6LPSOH3UR¿OH
H.264/AVCAV I
MPEG4‡ %DVHOLQH3UR¿OH
‡ 0DLQ3UR¿OH
‡ +LJK3UR¿OH
XAudio Codec
File TypeCorresponding Sampling
Frequency (kHz)Corresponding Bit Rates (kbps) Channel Mode
MP3WMV
AV I
MPEG4MPEG1 Layer3: 32/44.1/48
MPEG2 LSF Layer3: 16/22.05/24MPEG1 Layer3: 32-320
MPEG2 LSF Layer3: 8-160Stereo
Joint Stereo
Dual Channel
Monaural
W M A Ve r. 7 / 8 / 9WMV
AV I32/44.1/48Ve r. 7 / 8 : 4 8 - 1 9 2
Ver. 9 (9.1/9.2): 48-320Stereo
AACAV I
MPEG411.025/16/22.05/24/32/44.1/48 16-320Stereo
Monaural

”The player is compatible with VBR (Variable Bit Rate).

ROUTE GUIDANCE
232
No. Function
Select whether or not to use the expressway when
creating the route.
Select whether or not to use toll roads (Period Charge)
in the route.
Select whether or not to use toll roads (Per-use Toll) in
the route.
Select whether or not to use ferries when creating the
route. (However, ferries might not always be selected for
the route.) However, information on temporary service
ferries may not be displayed on the map. There may be
a fee for using the ferry.
Select whether or not to use Carpool/HOV lanes when
creating the route.
Select whether or not to use unpaved roads when
creating the route.
Select to search for the best green alternative route. If
this alternative route is much better than the selected
method, you can quickly switch to Green mode.

”The route is searched again, and the new
recommended route is indicated by a blue line.
SELECTING ROUTE TYPE
1. Display the “Route Settings (Route Settings)” screen.

:3
2. Select Route Planning Method (Route Planning
Method).
3. Select the desired route type.
No. Function
Select to search all roads for the quickest route following
the speed limits of the roads.
Select to search for the route that conserves the most
energy.
Select to search for a route that is easiest to drive, with
few right and left turns. Using this option, the program
allows you to avoid combinations of smaller roads and
to take the expressway.

COMMAND LIST
263
Siri/VOICE RECOGNITION SYSTEM
9
XCommands for Hands-free
Voice command Phrase Function
Redialredial, call again, dial
againPlaces a call to the
phone number of
the latest outgoing
call
Call backcall back, return phone
callPlaces a call to the
phone number of
latest incoming call
Recent calls [show] recent callsDisplays the call
history screen
Dial number
callingcall ,
dial Places a call to
the said phone
number
Call by name
and typecall
,
dial on
Place a call to the
said phone type of
the contact from
the phone book
List messagelist messages, list

messagesDisplays e-mails
Call call
This can be used
when receiving
messages Ignore ignore
Read read
Reply reply
XCommands for Pandora*
*: Pandora is available in the United States, Australia, and New Zealand.
Voice command Phrase Function
Pandora mode
changeplay Pandora stationsSwitch to Pandora
mode
List Pandora
stationslist Pandora stationsList Pandora
stations
Thumb up like, thumbs up0DUN³/LNH´ÀDJ
Thumb down dislike, thumbs down0DUN³'LVOLNH´ÀDJ
and skip to the
next song
XCommands for aha
Voice command Phrase Function
aha mode
changeplay aha stationsSwitch to aha
mode
List aha stations list aha stations List aha stations
Like on/offlike/unselect like,
thumbs up/unselect
thumbs up0DUN³/LNH´ÀDJ
Unmark it

COMMAND LIST
267
Siri/VOICE RECOGNITION SYSTEM
9
XCommands for navigation mode*
*: With navigation function
Voice command Phrase Function
Accept acceptAccepts questions
(such as talkback)
Accommodation*>

COMMAND LIST
269
Siri/VOICE RECOGNITION SYSTEM
9
Voice command Phrase Function
Back backTransits to the
previous screen
Bottom[go, jump, move, scroll]
[to] [the] bottomTransits to the
bottom of the list
Cancel cancelExits from the
voice recognition
mode and transits
to the map, main
or other menu
Cancel routedelete [my, the] route
Deletes the route
that has been set cancel [my, the] route
Delete delete
Down[page, scroll, move]
downMoves the list on
the list screen one
page down
Favorite>

COMMAND LIST
273
Siri/VOICE RECOGNITION SYSTEM
9
Voice command Phrase Function
Route inforoute info
Reads the route
information that
has been set
(after the voice
recognition mode
is turned off ) route information
route summary
Infoinfo
information
summary
Routeroute options
Transits to the
route editing
screen
[my, change] route
Restaurant*>