display SUZUKI ALTO 2013 7.G User Guide

5-17
OTHER CONTROLS AND EQUIPMENT
53MH0-74E
Listening to Radio
53M-07-059
Display
53M-07-060
(1) BAND button
(2) Up button
(3) Down button
(4) Preset buttons ([1] to [6])
(5) AST button
(A) Band
(B) Stereo
(C) preset Channel Number
(D) Frequency
EXAMPLE

5-18
OTHER CONTROLS AND EQUIPMENT
53MH0-74E
Selecting the reception BAND
Press the BAND button (1). Each time the
button is pressed, the reception band will
change as follows:
53M-07-061
Seek tuning
Hold down the seek Up button (2) or the
seek Down button (3) for 1 second or lon-
ger.
The unit stops searching for a station at a
frequency where a broadcast station is
available.
Manual tuning
Press seek Up button (2) or the seek Down
button (3).
The frequency being received is displayed.
Which receiving FM stereo broadcasting.
ST lights up.
Preset memory
1) Select the desired station.
2) Hold down a desired button ([1] to [6])
of the Preset buttons (4) to which you
want to store the station for 2 seconds
or longer.
Auto store
Hold down the AST button (5) for 1 second
or longer. Six stations in good reception
will automatically be stored to the Preset
buttons (4) in order, starting from a station
whose frequency is the lowest.
NOTE:
• Auto store can be released by pressing
AS button (5) while auto store is under
way.
• When the auto store is performed, the
station previously stored in the memory
at the position is over written.
• When there are fewer than 6 stations
that can be stored even if 2 rounds of
auto store operation is performed, no
station will be stored at the remaining
Preset buttons (4).
• 6 stations can be preset for FM1, FM2
and FM3 in common, and 6 stations for
AM in auto store mode.
Radio Reception
Radio reception can be affected by envi-
ronment, atmospheric conditions, or radio
signal’s power and distance from the sta-
tion. Nearby mountains and buildings may
interfere or deflect radio reception, causing
poor reception. Poor reception or radio
static can also be caused by electric cur-
rent from overhead wires or high voltage
power lines.

5-19
OTHER CONTROLS AND EQUIPMENT
53MH0-74E
Listening to a CD
53M-07-062
Display
53MM05011
(1) Eject button
(2) Insertion slot
(3) Media Source Mode button
(4) Up button
(5) Down button
(6) DIPS button
(7) RDM button
(8) RPT button
(9) SCAN button
(A) Track number
(B) Play time
NOTE:
This product does not support 8 cm CD
(sometimes called as “mini single CD”, “3-
inch CD”, “CD3” etc.).
EXAMPLE

5-21
OTHER CONTROLS AND EQUIPMENT
53MH0-74E
Listening to a CD
When a CD is inserted, playback will auto-
matically start.
When a CD is already inside the unit,
press the Media Source Mode button (3) to
select CD mode and to start playback.
Selecting a track
Press the Up button (4) to listen to the next
track.
Press the Down button (5) twice to listen to
the previous track. When the Down button
(5) is pressed once, the track currently
being played will start from the beginning
again.
Fast forwarding/Rewinding a track
Hold down the Up button (4) to fast for-
ward the track.
Hold down the Down button (5) to fast
rewind the track.
Track scan play
Press the SCAN button (9). The first 10
seconds of each track in the disc is played
in sequence.
NOTE:
To cancel the scan play, press the SCAN
button (9) again or switch to another mode
or turn the power off, or eject the disc.
Random playback
Track Random
Press the RDM button (7). Each time the
button is pressed, the mode will change as
follows:
53M-07-067
The random indicator “RDM” will light.
The tracks in the loaded disc will be played
in random order.
NOTE:
• To cancel random playback, press the
RDM button (7) again or eject the disc.
Repeat playback
Track Repeat
Press the RPT button (8).
Each time the button is pressed, the mode
will change as follows:
53M07068
The repeat indicator “RPT” will light.
The track currently being played will be
played repeatedly.
NOTE:
• To cancel repeat playback, press the
RPT button (8) again or eject the disc.
Display change
Press the DISP button (8).
Each time the button is pressed, display
will change as follows:
53M-07-069
Press the DISP (6) for 1 second or
longer.
Each time this button is pressed, the dis-
play switches as follows.
First 8 character next 8 characters.
A total of 16 characters can be dis-
played.
it the number of character is 8 or less,
display doesn’t switch.
If the disc/track name is not recorded on
the disc, “NO TITLE” will be displayed.

5-22
OTHER CONTROLS AND EQUIPMENT
53MH0-74E
Listening to an MP3/WMA/AAC Disc
53M-07-070
Display
53-07-071
(1) SCAN button
(2) RPT button
(3) RDM button
(4) DISP button (1 to 6)
(5) FLD - button
(6) FLD + button
(7) TRACK DOWN button
(8) TRACK UP button
(A) Disc type
(B) Folder number
(C) Track time
(D) Play type
EXAMPLE

5-23
OTHER CONTROLS AND EQUIPMENT
53MH0-74E
Selecting a folder
Press the Folder Up button (6) to select
next folder.
Press the Folder Down button (5) select
previous folder.
Selecting a track
Press the Up button (8) to listen to the
next track.
Press the Down button (7) twice to listen
to the previous track. When the Down
button (7) is pressed once, the track cur-
rently being played will start from the
beginning again.
Fast forwarding/Rewinding a track
Hold down the Up button (2) to fast for-
ward the track.
Hold down the Down button (3) to fast
rewind the track.
If you keep pressing the UP (8)/DOWN
button(7) until the beginning or ending of
the disc, the unit release the fast-for-
ward/rewind operation and plays the first
track.
Scan play
File scan
Press the SCAN button (1). The first 10
seconds of each file is sequence.
Folder scan
press the SCAN button (1) for 1 second or
longer. The first 10 seconds of the first file
in each folder stored in the disc is played in
sequence.
NOTE:
To cancel the scan play, press the SCAN
button (1) again or switch to another mode
or turn the power off, or eject the disc.
Random playback
Track random
Press the RDM button (5).
the random indicator “RDM” will light. The
tracks in the loaded disc will be played in
random order.
Folder random
Press the RDM button (3) for 1 second or
longer.
The random indicator “RDM and FOLD.”
will light. The tracks in the current folder
will be played in random order.
NOTE:
To cancel random playback, press the
RDM button (3) again or eject the disc.
Repeat playback
Track repeat
Press the RPT button (4).
The repeat indicator “RPT” will light. The
track currently being played will be played
repeatedly.
Folder repeat
press the RPT button (2) for 1 second or
longer.
The repeat indicator “RPT and FOLD.” will
light. All tracks in the currently selected
folder will be played repeatedly.
NOTE:
To cancel the repeat playback, press the
RPT button (2) again or eject the disc.
Display change
Press the DISP button (6).
Each time the button is pressed, display
will change as follows:

5-24
OTHER CONTROLS AND EQUIPMENT
53MH0-74E
53M-07-072
Press the DISP (4) for 1 second or
longer.
Each time this button is pressed, title dis
lay switches as follows.
First 8 characters Next 8 characters.
A total of 16 characters can be dis-
played.
If the number of character is 8 or less,
display doesn’t switch.
If the ID3 tag/tag info is not available on
the track, “NO TITLE” will be displayed.
WMA
Supports only v7/8/9, DRM/Professional/
Loseless/Voice are not supported
Bit rate:48, 64, 80, 96, 128, 160, 192
kbps
Sampling frequency:8, 16, 22.05, 32,
44.1 kHz
AAC
MPEG4 AAC (Compliant with ISO/IEC
14496-12:2003 + iTunes Meta-data
Specification)
Bit rate:up to 320kbps
Sampling frequency:8/11.025/ 12/16/
22.05/24/32/44.1/48 kHz
Apple loseless is not supported.
Supported file systems
ISO 9660 Level 1/Level 2, Joliet, Romeo
Maximum number of files/folders
Maximum number of files: 512 (files +
folders)
Maximum number of files in a folder: 256
Maximum depth of tree structure: 8
Maximum number of folders: 255
(Root folder is included.)
Playing limitations The number of tracks and folders that
can be played on one disc is as follows:
The total number of folders + total
tracks=512.
However, maximum number of folder is
255.
Also, maximum number of the folder
level is 8.
The compression bit rate of MP3 files
that can be played with the unit is from
32 kbps to 320 kbps. However, for file
capacity and sound quality, 128 kbps
and above is recommended. When a file
compressed at 128 kbps or less is
played, sound quality may be inconsis-
tent Compatible sampling rates are as
follows:
MPEG 1 48k 44.1k 32k
MPEG2 24k 22.05k 16k
MPEG2.5 12k 8k
When both music CD data (CD-DA) and
MP3/WMA/AAC file data exist on one
disc, only the music data (CD-DA) is
played. Do not write a file other than
MP3/WMA/AAC or needless folder in the
disc.
The unit is compatible with files com-
pressed with VBR (Variable Bit Rate),
however, the playback time may not be
displayed correctly during fast-forward/
rewind.
The unit may not play MP3/WMA/AAC
files in the order of recording.

5-25
OTHER CONTROLS AND EQUIPMENT
53MH0-74E
As the number of folders recorded on the
disc increases, the time to read the disc
information also increases.
Limitations of displayed
information
The unit only displays the folder and file

Only one-byte alphanumeric characters
and symbols can be displayed. If 2-byte
characters can be displayed, they will
display as 1 character. If 2-byte charac-
ter display is not possible, a “*” will be
displayed.
When playing MP3/WMA/AAC file, the
playback time may not be displayed
properly.
CAUTION
• The playback order may differ
depending on the writing software.
• Make sure to finalize the disc
before using on the unit.
• When naming an MP3/WMA/AAC
file, make sure to attach the exten-
sion “.mp3/.wma/.m4a” to the file
name.
• Do not attach the extension “.mp3/
.wma/.m4a” to files other than MP3/
WMA/AAC files. If a disc with such
a file is played, it will be mistakenly
recognized and it may cause
excessive noise to be emitted,
damaging the speaker.
• The unit may not be able to play
certain discs depending on disc
conditions, recording software or
the recorder used for writing the
data. In such cases, refer to the
instruction manual of the equip-
ment used.
• The unit is compatible with multi-
session recorded discs. However,
be sure to properly close the ses-
sion. Disc with a session that has
not been closed cannot be played
properly. When a disc is initially
inserted, some time will be
required for reading the data before
play can begin.

5-26
OTHER CONTROLS AND EQUIPMENT
53MH0-74E
Listening to files stored in a USB device
53M-07-073
Display
53M-07-074
(1) Media Source Mode button
(2) SCAN button
(3) RPT button
(4) RDM button
(5) DISP button
(6) FLD - button
(7) FLD + button
(8) TRACK DOWN button
(A) USB indicator
(B) Folder number
(C) Track number
(D) Play time
EXAMPLE

5-28
OTHER CONTROLS AND EQUIPMENT
53MH0-74E
Repeat playback
File repeat
Press the RPT button (3). The repeat indi-
cator “RPT” will light. The track currently
being played will be played repeatedly.
Folder Repeat
press the RPT button (3) for 1 second or
longer. The repeat indicator “RPT and
FOLD.” will light. All tracks in the currently
selected folder will be played repeatedly.
NOTE:
To cancel the repeat playback, press the
RPT button (3) again or eject the USB.
Display change
Press the DISP button (7).
Each time the button is pressed, display
will change as follows:
53M-07-076
Press the DISP (6) for 1 second or lon-
ger.
Each time this button is pressed, the dis-
play switches as follows. First 8 character
next 8 characters.
A total of 16 characters can be dis-
played.
If the number of character is 8or less, dis-
play doesn’t switch. If the ID3 tag/tag info is
not available on the track, “NO TITLE” will
be displayed.
Notes on USB device
Compatible USB devices
USB Mass Storage Class
For details as to whether your USB
memory/USB Audio is compatible with
USB Mass Storage Class, please con-
tact the USB memory/USB Audio manu-
facturer.
USB Standard Compatibility 1.1/2.0 Full
Speed
File System FAT16/32
Maximum current less than 1 A
Capacity less than 32 GB (1 partition)