high beam SUZUKI ALTO 2013 7.G Owners Manual
[x] Cancel search | Manufacturer: SUZUKI, Model Year: 2013, Model line: ALTO, Model: SUZUKI ALTO 2013 7.GPages: 190, PDF Size: 8.76 MB
Page 53 of 190
2-34
BEFORE DRIVING
53MH0-74E
Turn Signal Indicators
53M-04-084
When you turn on the left or right turn sig-
nals, the corresponding green arrow on the
instrument panel will flash along with the
respective turn signal lights. When you
turn on the hazard warning switch, both
arrows will flash along with all of the turn
signal lights.
Main Beam (high beam) Indicator
Light
53M-04-085
This indicator comes on when headlight
main beams (high beams) are turned on.
Front Fog Light Switch (if
equipped)
53M-04-086
The front fog light comes on when front fog
light operates.
Speedometer
ALTO 800
Ty p e 1
53M-04-087
Ty p e 2
53MH0238
EXAMPLE
EXAMPLE
Page 58 of 190
2-39
BEFORE DRIVING
53MH0-74E
Lighting Operation
Ty p e 1
53M-04-105
Ty p e 2
53M-04-106
To turn the lights on or off, twist the knob
on the end of the lever. There are three
positions:OFF (1)
All lights are off.
(2)
Front position lights, tail lights, license
plate light and instrument lights are on, but
headlights are off.
(3)
Front position lights, tail lights, license
plate light, instrument lights and head
lights are on.
Ty p e 1
53M-04-107
Ty p e 2
53M-04-108
With the headlights on, push the lever for-
ward to switch to the high beams (main
beams) or pull the lever toward you to
switch to the low beams. When the high
beams (main beams) are on, a light on the
instrument panel will come on. To momen-
tarily activate the high beams (main
beams) as a passing signal, pull the lever
slightly toward you and release it when you
have completed the signal.
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
Page 91 of 190
4-8
DRIVING TIPS
53MH0-74E
Night time driving
72F08020
1) Drive at lower speeds during the night
than in the daytime, as the visual range
is restricted at night.
2) Avoid overtaking other vehicles at night.
Darkness bothers your sense of speed
and hinders your judgment of vehicle-
to-vehicle distance.
72F08021
3) Don’t use headlights on high beam
unless its use is inevitable. It may cause
visual impairment to the driver of the
oncoming vehicle or the vehicle ahead
of you, which may cause an accident.
53M06015
4) Always keep the window glasses clean.
Don’t operate the windshield wiper
when the windshield glass is dry else
the wiper blade and glass may get dam-
aged.
Margin for Safety
It is important to allow yourself a margin for
safety during driving so that you can cope
with erroneous or unexpected driving of
other drivers. For that, observe the follow-
ing.
Drive at a safe speed.
Maintain a sufficient distance between
your vehicle and the vehicle ahead.
Don’t force yourself to overtake other
vehicles.
Don’t accelerate suddenly, steer sharply
or stop suddenly.
Keep ample gaps between driving
schedules.
Observe traffic rules and regulations.
Conclusion
A perfect driver does not exist. The
endeavour of every motorist should be to
strive for perfection. Safety consciousness
not only ensures your safety and the safety
of other road users, it also helps reduce
the wear and tear on your vehicle, length-
ens its life, gives better fuel efficiency and
ensures a comfortable driving experience.
Follow the do’s and dont’s listed, and
driving will never be the same again.