key battery SUZUKI ALTO 2013 7.G Owners Manual
[x] Cancel search | Manufacturer: SUZUKI, Model Year: 2013, Model line: ALTO, Model: SUZUKI ALTO 2013 7.GPages: 190, PDF Size: 8.76 MB
Page 24 of 190
2-5
BEFORE DRIVING
53MH0-74E
Keyless Entry System (if
equipped)
53M-04-010
Keyless EntryYou can lock / unlock all doors simultane-
ously by operating the transmitter near the
vehicle.
To lock all doors, press “LOCK” button
once. All indicator lights will flash once
when doors are locked.
To unlock all doors, press “UNLOCK”
button once. All indicator lights will flash
twice when doors are unlocked.
NOTE:
• The operating distance of the keyless
entry system transmitter is about 20
meters, but this may vary depending on
the condition of transmitter’s battery and
surroundings especially near other
transmitting devices such as radio tow-
ers.
• The door locks cannot be operated with
the transmitter if the ignition key is
inserted in the key cylinder or if any door
is open.
• Be sure to close the doors and windows
before locking.• If you lose any of the transmitters (keys),
contact your MARUTI SUZUKI autho-
rised dealer as soon as possible for
erasing the transmitter ID from vehicle
controller memory. In case you need a
new transmitter, place an order with your
dealer.
• Key cylinder mentioned in this section is
the key hole mounted on steering col-
umn, where key is inserted to start the
vehicle.
GENERAL FEATURES
Illuminated Entry
When vehicle is unlocked, the room lamp
will turn ON to facilitate illuminated entry
into the vehicle. The room lamp will turn
OFF when the door is closed.
Illuminated Exit
When door is opened to exit the vehicle,
the room lamp will turn ON and will turn
OFF when the door is closed.
Auto Relock
In case of accidental Unlock/Disarm of
vehicle by Key, vehicle will automatically
Lock within 30 sec. without any indication.
Auto relock cycle gets canceled if user
does any of the following operation within
30 sec:
1. Open any door.
2. Insert key in cylinder.
3. Any door is locked/unlocked by door
knob.
Radio Frequency Lock Out
Key Lock/Unlock/Panic will cease to func-
tion when Key is inside Key cylinder.
EXAMPLE
NOTICE
The transmitter is a sensitive elec-
tronic instrument. To avoid damaging
the transmitter:
• Do not expose it to impacts, mois-
ture, dust or high temperature such
as leaving it on the dashboard
under direct sunlight.
• Do not tamper with internal parts.
• Keep the transmitter away from
magnetic objects such as a televi-
sion.
Page 27 of 190
2-8
BEFORE DRIVING
53MH0-74E
Transmitter battery
Replacement of the Battery
53M-04-013
If the transmitter battery gets discharged, replace the battery with a new one. To replace the battery of the transmitter: 1) Remove the screw (1), and open thetransmitter cover. 2) Remove the tr ansmitter (2). 3) Put the edge of a flat blade screw driverin the slot of the transmitter (2) and pry it open. 4) Replace the battery (3) (Lithium disctype CR1620) so that its +ve terminal faces the bottom cover of the transmit- ter (5).
53M-04-014
5) Close the transmitter and install it into the transmitter holder. 6) Close the transmitte r cover, install and tighten the screw (1). 7) Make sure the door locks can be oper- ated with the transmitter.
NOTE: Normal battery life is approximately 2years, but varies depending on usage. It is advisable to get battery replaced from MARUTI SUZUKI Authorized workshop.
53M-04-015
EXAMPLE
CAUTION
Do not remove the screw from thekey unnecessarily as it damages thescrew head. Kindly replace the screw once the transmitter battery is changed.
EXAMPLE
CAUTION
Dispose off the used battery properly according to applicable rules or regu- lations. Do not di spose off lithium batteries with ordinary household trash.
WA R N I N G
Swallowing a lithium battery may cause serious internal injury. Do not allow anyone to swallow a lithium battery. Keep lithium batteries away from chil-dren and pets. If sw allowed, contact a physician immediately.
Page 65 of 190
3-2
OPERATING YOUR VEHICLE
53MH0-74E
4) Make sure the hood is fully closed and
latched.
5) Check the headlights, turn signal lights,
brake lights and horn for proper opera-
tion.
6) Adjust the seat and head restraint
(if equipped).
7) Check the brake pedal and the parking
brake lever.
8) Adjust the mirrors.
9) Make sure that you and all passengers
have properly fastened your seat belts.
10)Make sure that all warning lights come
on as the key is turned to the “ON” posi-
tion.
11)Check all gauges.
12)Make sure that the BRAKE SYSTEM
WARNING light turns off when the
parking brake is released.
Once a week, or each time you fill your fuel
tank, perform the following under-hood
checks:
1) Engine oil level
2) Coolant level
3) Brake fluid level
4) Windshield washer fluid level
5) Battery solution level
6) Hood latch operation
Pull the hood release handle inside the
vehicle. Make sure that you cannot
open the hood all the way without
releasing the secondary latch. Be sure
to close the hood securely after check-
ing for proper latch operation. See “Alllatches, hinges & locks” of “CHASSIS
AND BODY” in the “Periodic Mainte-
nance Schedule” in the “INSPECTION
AND MAINTENANCE” section for lubri-
cation schedule.
Once a month, or each time you fill your
fuel tank, check the tire pressure using a
tire pressure gauge. Also check the tire
pressure of the spare tire.Engine Oil Consumption
It is normal for the engine to consume
some engine oil during normal vehicle
operation.
The amount of engine oil consumed
depends on the viscosity of the oil, the
quality of the oil and the conditions the
vehicle is driven under.
More oil is consumed during high-speed
driving and when there is frequent acceler-
ation and deceleration. Under high loads,
your engine also will consume more oil.
A new engine also consumes more oil,
since its pistons, piston rings and cylinder
walls have not yet become conditioned.
New engines reach the normal level of oil
consumption only after approximately 5000
km (3000 miles) driving.
Oil consumption:
Max. 1.0 L per 1000 km
When judging the amount of oil consump-
tion, note that the oil may become diluted
and make it difficult to accurately judge the
true oil level.
As an example, if a vehicle is used for
repeated short trips, and consumes a nor-
mal amount of oil, the dipstick may not
show any drop in the oil level at all, even
after 1000 km or more of driving. This is
because the oil is gradually becoming
diluted with fuel or moisture, making it
appear that the oil level has not changed.
WA R N I N G
Make sure the hood is fully closed
and latched before driving. If it is not,
it can fly up unexpectedly during
driving, obstructing your view and
resulting in an accident.
Page 67 of 190
3-4
OPERATING YOUR VEHICLE
53MH0-74E
It locks the ignition, and prevents normal
use of the steering wheel after the key is
removed.
To release the steering lock, insert the key
and turn it clockwise to one of the other
positions. If you have trouble turning the
key to unlock the steering, try turning the
steering wheel slightly to the right or left
while turning the key.
ACC
Accessories such as the radio can oper-
ate, but the engine is off.
ON
This is the normal operating position. All
electrical systems are on.
START
This is the position for starting the engine
using the starter motor. The key should be
released from this position as soon as the
engine starts.
Ignition key reminder (if equipped)
A buzzer sounds intermittently to remind
you to remove the ignition key if it is in the
ignition switch when the driver’s door is
opened.
81A297S
WA R N I N G
• Never remove the ignition key
while the vehicle is moving. The
steering wheel will lock and you
will not be able to steer the vehicle.
• Always remove the ignition key
when leaving the vehicle even if
only for a short time. Also do not
leave children alone in a parked
vehicle. Unattended children could
cause accidental movement of the
vehicle or could tamper with power
windows. They also could suffer
from heat stroke in warm or hot
weather. These could result in
severe injury or even death.
EXAMPLENOTICE
• Do not use the starter motor for
more than 15 seconds at a time. If
the engine does not start, wait 15
seconds before trying again. If the
engine does not start after several
attempts, check the fuel and igni-
tion systems or consult your MAR-
UTI SUZUKI dealer.
• Do not leave the ignition switch in
the “ON” position if the engine is
not running as the battery will dis-
charge.
Page 175 of 190
8-6
EMERGENCY SERVICE
53MH0-74E
Towing
If you need to have your vehicle towed,
contact a professional service. Your dealer
can provide you with detailed towing
instructions.
2-Wheel Drive (2WD) Manual Transaxle
or Automated Manual Transaxle
Manual transaxle vehicles or Automated
Manual Transaxle may be towed using
either of the following methods.
1) From the front, with the front wheels
lifted and the rear wheels on the
ground. Before towing, make sure that
the parking brake is released.
2) From the rear, with the rear wheels
lifted and the front wheels on the
ground, provided the steering and
drivetrain are in operational condition.
Before towing, make sure that transaxle
is in neutral, the steering wheel is
unlocked (the ignition key should be in
the “ACC” position), and the steering
wheel is secured with a clamping
device designed for towing service.
If the Starter Does Not
Operate
1) Try turning the ignition switch to the
“START” position with the headlights
turned on to determine the battery con-
dition. If the headlights go excessively
dim or go off, it usually means that
either the battery is flat or the battery
terminal contact is poor. Recharge the
battery or correct battery terminal con-
tact as necessary.
2) If the headlights remain bright, check
the fuses. If the reason for failure of the
starter is not obvious, there may be a
major electrical problem. Have the vehi-
cle inspected by your authorized MAR-
UTI SUZUKI dealer.
If the Engine is Flooded
If the engine is flooded with gasoline, it
may be hard to start. If this happens, press
the accelerator pedal all the way to the
floor and hold it there while cranking the
engine. (Do not operate the starter motor
for more than 15 seconds).
NOTICE
To help avoid damage to your vehicle
during towing, proper equipment and
towing procedures must be used.
NOTICE
After shifting the auto gear shift gear-
shift lever to the “N” position, always
check the gear position indicator in
the instrument cluster shows the “N”
position to make sure that the
transaxle is disengaged.
If the transaxle cannot be put in neu-
tral, turn the key from the “OFF” to
the “ON” position, and move the auto
gear shift gearshift lever from “N” to
“D”, “M” or “R”, then back to “N”
again. Then turn the key from the
“ON” to the “OFF” position.
These procedures may help put the
transaxle in neutral. If the transaxle
still cannot be put in neutral, you can-
not tow the vehicle without using a
towing dolly.
NOTICE
The steering column is not strong
enough to withstand shocks trans-
mitted from the front wheels during
towing. Always unlock the steering
wheel before towing.