length SUZUKI ALTO 2013 7.G Owners Manual
[x] Cancel search | Manufacturer: SUZUKI, Model Year: 2013, Model line: ALTO, Model: SUZUKI ALTO 2013 7.GPages: 190, PDF Size: 8.76 MB
Page 36 of 190
2-17
BEFORE DRIVING
53MH0-74E
60A040
To reduce the risk of sliding under the belt
during a collision, position the lap portion
of the belt across your lap as low on your
hips as possible and adjust it to a snug fit
by pulling the shoulder portion of the belt
upward through the latch plate. The length
of the diagonal shoulder strap adjusts itself
to allow freedom of movement.
All Seat Belts Except Rear Center
All seat belts except rear center are the
lap-shoulder belt.
60A036
To fasten the seat belt, sit up straight and
well back in the seat, pull the latch plate
attached to the seat belt across your body
and press it straight into the buckle until
you hear a “click”.
60A039
To unfasten the seat belt, push the button
on the buckle and retract the belt slowly
while attaching a hand to the belt or/and
the latch plate.
Rear Center Seat Belt
Rear center seat belt is the lap belt.
To fasten the belt, pull the latch plate
attached to the seat belt across your hips
and press it straight into the buckle until
you hear a “click”. To reduce the risk of
sliding under the belt during a collision,
position the belt across your lap as low on
your hips as possible and adjust it to a
snug fit.
Low on hips
EXAMPLE
EXAMPLE
EXAMPLE
Page 37 of 190
2-18
BEFORE DRIVING
53MH0-74E
80JS028
To tighten the belt, pull the free end of the
belt across alongside the lap strap.
80JS029
To lengthen, release the latch plate from
the buckle, pull the latch plate (adjuster) in
the direction of the arrow, at right angles tothe belt. The latch plate should then be
refitted into the buckle and the belt tight-
ened as previously described.
To unfasten the belt, press the release but-
ton on the buckle catch.
80JS031
NOTE:
To identify the center seat belt buckle and
latch plate in the rear seat, “CENTER” is
marked on the buckle and latch plate of the
center lap belt. The buckles are designed
so a latch plate cannot be inserted into the
wrong buckle.
Seat Belt Hanger
53MH0214
TO TIGHTEN
Low on hips
EXAMPLE
TO LOOSEN
Right angle
EXAMPLE
EXAMPLENOTICE
• When you move a seatback, make
sure the webbing is hooked in the
seat belt hangers so the seat belts
are not caught by the seatback,
seat hinge, or seat latch. This helps
prevent damage to the belt system.
• Make sure the belt webbing is not
twisted.
EXAMPLE
Page 91 of 190
4-8
DRIVING TIPS
53MH0-74E
Night time driving
72F08020
1) Drive at lower speeds during the night
than in the daytime, as the visual range
is restricted at night.
2) Avoid overtaking other vehicles at night.
Darkness bothers your sense of speed
and hinders your judgment of vehicle-
to-vehicle distance.
72F08021
3) Don’t use headlights on high beam
unless its use is inevitable. It may cause
visual impairment to the driver of the
oncoming vehicle or the vehicle ahead
of you, which may cause an accident.
53M06015
4) Always keep the window glasses clean.
Don’t operate the windshield wiper
when the windshield glass is dry else
the wiper blade and glass may get dam-
aged.
Margin for Safety
It is important to allow yourself a margin for
safety during driving so that you can cope
with erroneous or unexpected driving of
other drivers. For that, observe the follow-
ing.
Drive at a safe speed.
Maintain a sufficient distance between
your vehicle and the vehicle ahead.
Don’t force yourself to overtake other
vehicles.
Don’t accelerate suddenly, steer sharply
or stop suddenly.
Keep ample gaps between driving
schedules.
Observe traffic rules and regulations.
Conclusion
A perfect driver does not exist. The
endeavour of every motorist should be to
strive for perfection. Safety consciousness
not only ensures your safety and the safety
of other road users, it also helps reduce
the wear and tear on your vehicle, length-
ens its life, gives better fuel efficiency and
ensures a comfortable driving experience.
Follow the do’s and dont’s listed, and
driving will never be the same again.
Page 187 of 190
11-1
SPECIFICATIONS
53MH0-74E
11
SPECIFICATIONS
NOTE:
Specifications are subject to change without notice.
ITEM: DimensionsUNIT: mm
ALTO 800 ALTO K10
Overall length 3430 3545
Overall widthWith Body Side Molding 1515 1515
Without Body Side Molding 1490 1490
Overall height 1475 1475
Wheelbase2360 2360
Track Front1295 1295
Rear1290 1290
Ground clearance 160 160
ITEM: Mass (weight)UNIT: kg
ALTO 800 ALTO K10
Curb mass (weight) 695-727 740-755
Gross vehicle mass (weight) rating 1185 1210
Permissible maximum Axle WeightFront 630 630
Rear 630 630