buttons SUZUKI BALENO 1999 1.G Owners Manual

60G-74E
INSTRUMENT PANEL

Description of Controls

Function Buttons ©: These buttons are used

to select one of the functions described below:

VENTILATION ©: Temperature-

controlled air comes out of the

center and side air outlets.

BI-LEVEL ®: Temperature-

controlled air comes out of the floor

outlets and cooler air comes out of

the center and side outlets. When

the temperature control lever is in

the fully "COOL" position or fully

"HOT" position, however, the air from

the floor outlets and the air from the

center and side outlets will be the

same temperature.

HEAT ©: Temperature-controlled air

comes out of the floor outlets.

HEAT & DEFROST ©: Tempera-

ture-controlled air comes out of the

floor outlets, the windscreen de-

froster outlets, and the side defroster

outlets.
DEFROST ©: Temperature-

controlled air comes out of the

windscreen defroster outlets and the

side defroster outlets.

Air Intake Lever ©:This lever is used to select

between circulating outside air (FRESH AIR)

or recirculating inside air (RECIRCULATED

AIR).

Temperature Control Lever ©: This lever is

used to control the temperature of the air that

comes out of the air outlets.

Fan switch ©: This switch is used to turn on

the fan and to select fan speed. There are five

positions: OFF, LOW, MEDIUM, MEDIUM

HIGH and HIGH.
SYSTEM OPERATING INSTRUCTIONS

60G-05-014

Natural Ventilation

Push the "VENTILATION" button and move the

air intake lever to "FRESH AIR", the

temperature control lever to the desired

temperature position, and the fan switch to

"OFF. Fresh air will flow through the vehicle

when it is moving.

70F-03-032

47
5-10

INSTRUMENT PANEL

60G-74E

60G-05-015

Forced Ventilation

The lever settings are the same as for natural

ventilation except you move the fan switch to

a position other than "OFF".
1

I
*
A/C

1
OFF
| | ••

= =11

60G-05-016

Normal Heating (Using outside air)

Push the "HEAT" button and move the air

intake lever to "FRESH AIR", the temperature

control lever to the desired temperature

position, and the fan switch to the desired fan

speed position. Moving the fan switch to a

higher fan speed position increases heating

efficiency.
60G-05-017

Quick Heating (Using recirculated air)

The lever settings are the same as for normal

heating except you move the air intake lever

to "RECIRCULATED AIR". If you use this

heating method for an extended period of time,

the air in the vehicle can become

contaminated and the windows can become

misty. Therefore, use this method only for quick

heating and change to the normal heating

method as soon as possible.

5-11
70F-03-031
70F-03-030
70F-03-029