maintenance SUZUKI ERTIGA 2013 1.G Service Manual
[x] Cancel search | Manufacturer: SUZUKI, Model Year: 2013, Model line: ERTIGA, Model: SUZUKI ERTIGA 2013 1.GPages: 207, PDF Size: 5.14 MB
Page 176 of 207
Downloaded from www.Manualslib.com manuals search engine 7-31INSPECTION AND MAINTENANCE
60MK0-14E
60MH054
2) Close the tailgate. Release the claws
(3) of the light housing by a flat blade
screwdriver, etc. The claws are shown
in the next illustration. Remove a high-
mount stop light housing (2) from the
tailgate.
60MH070
3) Remove the each bulb.
4) Replace the bulbs.
To install a high-mounted stop light
housing in the reverse order of removal.
Wiper Blades
54G129
If the wiper blades become brittle or dam-
aged, or make streaks when wiping,
replace the wiper blades.
To install new wiper blades, follow the pro-
cedures below.
NOTE:
Some wiper blades may be different from
the ones described here depending on
vehicle specifications. If so, consult your
SUZUKI dealer for proper replacement
method.
(2) (3)
EXAMPLE
(3)
NOTICE
To avoid scratching or breaking the
window, do not let the wiper arm
strike the window while replacing the
wiper blade.
Page 177 of 207
Downloaded from www.Manualslib.com manuals search engine 7-32
INSPECTION AND MAINTENANCE
60MK0-14E
For windshield wipers:
70G119
1) Hold the wiper arm away from the win-
dow.
54G130
2) Squeeze lock (1) towards wiper arm (2)
and remove the wiper frame from the
arm as shown.
3) Unlock the lock end of the wiper blade
and slide the blade out as shown.
60A260
71LMT0708
(3) Retainer
EXAMPLE
EXAMPLE
EXAMPLE
(3)
(3)
EXAMPLE
Page 178 of 207
Downloaded from www.Manualslib.com manuals search engine 7-33INSPECTION AND MAINTENANCE
60MK0-14E
4) If the new blade is provided without the
two metal retainers, move them from
the old blade to the new one.
60MH07160MH072
(A) Up
(B) Down
NOTE:
When you install the metal retainers (3),
make sure the direction of metal retainers
as shown in the above illustrations.
71LMT0707
(4) Locked end
5) Install the new blade in the reverse
order of removal, with the locked end
positioned toward the wiper arm.
Make sure the blade is properly
retained by all the hooks. Lock the
blade end into place.
6) Reinstall wiper frame to arm, making
sure that the lock lever is snapped
securely into the arm.
(3)
(3)
EXAMPLE
(3)(A)
(B)
EXAMPLE
(4)(4)
EXAMPLE
Page 179 of 207
Downloaded from www.Manualslib.com manuals search engine 7-34
INSPECTION AND MAINTENANCE
60MK0-14E
For rear wipers:
80G146
1) Hold the wiper arm away from the win-
dow.
2) Remove the wiper frame from the arm
as shown.
3) Slide the blade out as shown.
65D151
NOTE:
Do not flex the wiper blade frame end more
than necessary. If you do, it can break off.
54G135
(1) Retainer
4) If the new blade is provided without the
two metal retainers, move them from
the old blade to the new one.
5) Install the new blade in the reverse
order of removal.
Make sure the blade is properly
retained by all the hooks.
6) Reinstall wiper frame to arm in the
reverse order of removal.
Page 180 of 207
Downloaded from www.Manualslib.com manuals search engine 7-35INSPECTION AND MAINTENANCE
60MK0-14E
Windshield Washer Fluid
80JM078
Check that there is washer fluid in the tank.
Refill it if necessary. Use a good quality
windshield washer fluid, diluted with water
as necessary.
Air Conditioning SystemIf you do not use the air conditioning sys-
tem for a long period, such as during win-
ter, it may not give the best performance
when you start using it again. To help
maintain optimum performance and dura-
bility of your air conditioning system, it
needs to be run periodically. Operate the
air conditioning system at least once a
month for one minute with the engine
idling. This circulates the refrigerant and oil
and helps protect the internal components.
WARNING
Do not use “anti-freeze” solution in
the windshield washer reservoir. This
can severely impair visibility when
sprayed on the windshield, and also
damage your vehicle’s paint.
NOTICE
Damage may result if the washer
motor is operated with no fluid in the
washer tank.
EXAMPLE
Page 190 of 207
Downloaded from www.Manualslib.com manuals search engine 8-9EMERGENCY SERVICE
60MK0-14E
If the Engine OverheatsThe engine could overheat temporarily
under severe driving conditions. If the
engine coolant temperature gauge indi-
cates overheating during driving:
1) Turn off the air conditioner, if equipped.
2) Take the vehicle to a safe place and
park.
3) Let the engine run at the normal idle
speed for a few minutes until the indica-
tor is within the normal, acceptable
temperature range between “H” and
“C”.If the temperature indication does not
come down to within the normal, accept-
able range:
1) Turn off the engine and check that the
water pump belt and pulleys are not
damaged or slipping. If any abnormality
is found, correct it.
2) Check the coolant level in the reservoir.
If it is found to be lower than the “LOW”
line, look for leaks at the radiator, water
pump, and radiator and heater hoses. If
you locate any leaks that may have
caused the overheating, do not run the
engine until these problems have been
corrected.
3) If you do not find a leak, carefully add
coolant to the reservoir and then the
radiator, if necessary. (Refer to “Engine
Coolant” in the “INSPECTION AND
MAINTENANCE” section.)
NOTE:
If your engine overheats and you are
unsure what to do, contact your SUZUKI
dealer.
79J007
WARNING
If you see or hear escaping steam,
stop the vehicle in a safe place and
immediately turn off the engine to let
it cool. Do not open the hood when
steam is present. When the steam
can no longer be seen or heard, open
the hood to see if the coolant is still
boiling. If it is, you must wait until it
stops boiling before you proceed.
WARNING
It is hazardous to remove the radia-
tor cap (or degassing tank cap for a
diesel engine) when the water tem-
perature is high, because scalding
fluid and steam may be blown out
under pressure. The cap should
only be taken off when the coolant
temperature has lowered.
To help prevent personal injury,
keep hands, tools and clothing
away from the engine cooling fan
and air-conditioner fan (if
equipped). These electric fans can
automatically turn on without warn-
ing.
Page 200 of 207
Downloaded from www.Manualslib.com manuals search engine 11-2SPECIFICATIONS
60MK0-14E
ITEM: Engine
Ty p eK14B (DOHC)
Number of cylinders 4
Bore73.0 mm (2.87 in.)
Stroke 82.0 mm (3.23 in.)
Piston displacement 1373 cm
3
(1373 cc, 83.8 cu.in)
Compression ratio 10.0 : 1
ITEM: Electrical
Standard spark plug NGK KR6A-10
Battery 12V 34B19L
Fuses See “INSPECTION AND MAINTENANCE” section.
Page 205 of 207
Downloaded from www.Manualslib.com manuals search engine 12-3
INDEX60MK0-14E
Interior Light......................................................................... 7-27
Interior Light Switch ............................................................ 5-40
iPod
®..................................................................................... 5-26
JJacking Instructions .............................................................. 8-2
Jump Starting Instructions ................................................... 8-6KKeyless Entry System Transmitter ...................................... 2-5
Keys ........................................................................................ 2-1LLap-Shoulder Belt ................................................................ 2-22
Light Reminder Buzzer........................................................ 2-51
Lighting Control Lever ........................................................ 2-50
Lighting Operation............................................................... 2-51
Low Fuel Warning Light ...................................................... 2-42
Luggage Box ........................................................................ 5-46MMain Beam (high beam) Indicator Light ............................ 2-42
Maintenance Recommended under Severe
Driving Conditions................................................................. 7-5
Maintenance Schedule .......................................................... 7-2
Malfunction Indicator Light................................................. 2-40
Manual Transaxle................................................................... 3-9
Manual Window Control ...................................................... 2-11
Mirrors .................................................................................. 2-13
MP3/WMA Disc ..................................................................... 5-18OOdometer .............................................................................. 2-50
Oil Level Check ...................................................................... 7-8
Oil Pressure Light ................................................................ 2-39Open Door Warning Light ................................................... 2-41
Outside Rearview Mirrors.................................................... 2-13
Overhead rear air conditioning system ............................... 5-3
PParking Brake ....................................................................... 7-19
Parking Brake Lever .............................................................. 3-5
Pedal........................................................................................ 3-7
Periodic Maintenance Schedule ........................................... 7-2
Power-Assisted Brakes ....................................................... 3-13RRadio ..................................................................................... 5-13
Radio Antenna ........................................................................ 5-6
Rear Seats............................................................................. 2-16
Rear Window Wiper/Washer Switch ................................... 2-55
Refill with Oil and Check for Leaks .................................... 7-11
Refilling ................................................................................... 7-8
Replace the Oil Filter ........................................................... 7-10
Replacement of the Battery................................................... 2-6
Running-in .............................................................................. 4-1SSeat Adjustment .......................................................... 2-14, 2-16
Seat Belt Hanger .................................................................. 2-26
Seat Belt Inspection ............................................................. 2-26
Seat Belts and Child Restraint Systems ............................ 2-20
Selection of Coolant ............................................................ 7-11
Shoulder Anchor Height Adjuster ...................................... 2-25
Side Door Locks ..................................................................... 2-2
Spark Plugs .......................................................................... 7-13
SPECIFICATIONS ................................................................. 11-1
Specified Fluid...................................................................... 7-16
Specified Gear Oil ................................................................ 7-15