bulb SUZUKI NEXA 2015 1.G User Guide

Downloaded from www.Manualslib.com manuals search engine 
,163(&7,21$1'0$,17(1$1&(
06(
*ORYH%R[/LJKWLIHTXLSSHG

Since special procedures are required, we
recommend you take your vehicle to your
DXWKRULVHG 0DUXWL 6X]XNL ZRUNVKRSfor bulb
replacement.
61M0108
1) Press inward on both side of the glove
box to unclamp it.
61M0109
2) Push the damper (1) (if equipped) right-
ward to remove the grove box.
64MS096
3) To remove and install the bulb of the
glove box light (2), simply pull out or
push in the bulb.
:LSHU%ODGHV
54G129
If the wiper blades become brittle or dam-
aged, or make streaks when wiping,
replace the wiper blades.
To install new wiper blades, follow the pro-
cedures below.
NOTE:
Some wiper blades may be different from
the ones described here depending on
vehicle specifications. If so, consult your
DXWKRULVHG 0DUXWL 6X]XNL ZRUNVKRSfor
proper replacement method.
(;$03/(
(;$03/(
(1)
(2)
(;$03/(
NOTICE
7R DYRLG VFUDWFKLQJ RU EUHDNLQJ WKH
ZLQGRZ GR QRW OHW WKH ZLSHU DUP
VWULNHWKHZLQGRZZKLOHUHSODFLQJWKH
ZLSHUEODGH

Downloaded from www.Manualslib.com manuals search engine 
,163(&7,21$1'0$,17(1$1&(
06(
$LU&RQGLWLRQLQJ6\VWHPIf you do not use the air conditioner for a
long period, such as during winter, it may
not give the best performance when you
start using it again. To help maintain opti-
mum performance and durability of your air
conditioner, it needs to be run periodically.
Operate the air conditioner at least once a
month for one minute with the engine
idling. This circulates the refrigerant and oil
and helps protect the internal components.5HSODFHPHQWRIWKH$LU&RQGLWLRQHU

)LOWHULIHTXLSSHGSince special procedures are required, we
recommend you take your vehicle to your
DXWKRULVHG0DUXWL6X]XNLZRUNVKRSfor the
air conditioner filter replacement.
1) To access the air conditioner filter,
remove the glove box. Refer to the pro-
cedure for the bulb replacement of the
“Glove Box Light” in this section.
79MH0761
2) Remove the cover (1) and pull out the
air conditioner filter (2).
NOTE:
When you install a new filter, make sure
the UP mark (3) faces upward.
(1)
(2)
(3)