stop start TOYOTA 4RUNNER 2003 N210 / 4.G Navigation Manual
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 2003, Model line: 4RUNNER, Model: TOYOTA 4RUNNER 2003 N210 / 4.GPages: 187, PDF Size: 4.28 MB
Page 2 of 187
4Runner_Navi_U (L/O 0208)
ii
2003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
Important information about this manual
For safety reasons, this manual indicates
items requiring particular attention with
the following marks.
CAUTION
This is a warning against anything
which may cause injury to people if
the warning is ignored. You are in-
formed about what you must or
must not do in order to reduce the
risk of injury to yourself and others.
NOTICE
This is a warning against anything
which may cause damage to the ve-
hicle or its equipment if the warning
is ignored. You are informed about
what you must or must not do in
order to avoid or reduce the risk of
damage to your vehicle and its
equipment.
INFORMATION
This provides additional information.
Initial screen
UN001
When you start the engine or turn the
ignition switch to “ACC”, the initial
“TOYOTA” screen appears and the
system begins operating.
CAUTION
When the vehicle is stopped with
the engine running, always apply
the parking brake for safety.
After a few seconds, the “CAUTION”
screen appears.
L00002
Touch either “English” or “French” to
select a language. Read and follow
the instructions.
Page 44 of 187
4Runner_Navi_U (L/O 0208)
362003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
L00059
Touch the “Route overview” on
the “Menu” screen.
L00069
The entire route from the starting point to
the destination is displayed. Touch the
“Route preview” switch
on the “Menu” screen. The “Route pre-
view” screen appears.
L00070
To indicate the next destina-
tion or selected POI
To preview the route to the
next destination or selected
POI
To preview the route to the
next destination in fast −for-
ward mode
To stop the preview
To review the route to the
previous starting point
To review the route to the
previous starting point in
fast −forward mode
To indicate the previous start-
ing point
Route overview Route preview
Page 145 of 187
4Runner_Navi_U (L/O 0208)
1372003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
L00179
(e) Traffic broadcast station search
“TRAF” button
This button turns the traffic broadcast
station search feature on and off when
you are turning the FM radio on.
During a traffic broadcast station search,
“TRAF SEEK” will display. If the radio
finds a traffic broadcast station, it will
stop searching. If no traffic broadcast
stations are found, “NOTHING” will dis-
play.L00172
(a) Playing a cassette tape
To insert a cassette tape, push the
“OPEN” button to lower the display.
Put the cassette tape in the slot with
the exposed tape side to the right and
lightly push it in.
The player will automatically start when
you insert the cassette tape. At this time,
“Tape” appears on the screen.
If a metal or chrome equivalent cassette
tape is put in the cassette player, the
player will automatically adapt to it and
“MTL” appears on the screen.
CAUTION
Do not place anything on the
opened display, as such items may
be thrown about in the compart-
ment and possibly injure people in
the vehicle during sudden braking
or in an accident.
To reduce the chance of injury in
case of an accident or sudden
stop while driving, keep the dis-
play closed.
Take care not to jam your hand
while the display is moving. Other-
wise, you could be injured.
—Cassette tape player
operation
Page 149 of 187
4Runner_Navi_U (L/O 0208)
1412003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
L00174
(a) Playing a compact disc
To insert a compact disc, push the
“OPEN” button to lower the display.
Put the compact disc in the slot with
the label side up.
The player will automatically start when
you insert the compact disc. At this time,
“CD” appears on the screen.
If the label faces down, the disc cannot be
played. In this case, “CD ERROR” appears
on the screen.
CAUTION
Do not place anything on the
opened display, as such items may
be thrown about in the compart-
ment and possibly injure people in
the vehicle during sudden braking
or in an accident.
To reduce the chance of injury in
case of an accident or sudden
stop while driving, keep the dis-
play closed.
Take care not to jam your hand
while the display is moving. Other-
wise, you could be injured.
NOTICE
Do not obstruct th e display while it
is moving. It could damage your au-
dio system.
—Compact disc player
operation
Page 157 of 187
4Runner_Navi_U (L/O 0208)
1492003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
When the magazine is set completely, the
system will be in a load cycle for approxi-
mately 30 seconds while the system
searches for discs in the magazine. Upon
completion of this cycle, the DVD player
unit will be ready to play. If the “DISC”
button is pushed during the load cycle,
“LOAD” appears on the screen until the
system completes the load cycle, then
the system will begin normal play.
CAUTION
To reduce the chance of injury in
case of an accident or a sudden
stop, always keep the glove box
closed while driving.
L00178
(b) Playing a disc
Push the “DISC” button if the maga-
zine is already loaded in the player.
“DVD CHANGER” appears on the screen.
If the compact disc player is turned on,
push the “DISC” button to switch to the
DVD player.
The discs set in the magazine are played
continuously starting with disc number 1.
The disc number of the disc being played
currently, the track or chapter number
and the time from the beginning of the
program are shown on the screen.
Page 161 of 187
4Runner_Navi_U (L/O 0208)
1532003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
(e) Operating a DVD video disc
NOTE: The playback condition of some
DVD video discs may be determined
by the manufacturer of the DVD video
software producer. This DVD player
plays discs as the software manufac-
turer intended. Therefore, some func-
tions may not work properly. Be sure
to read the instru ction manual for the
DVD video disc separately provided.
For detailed information about DVD
video discs, see “(h) DVD video disc
information”.
Precautions for DVD video discs
When recording on a DVD or video CD,
audio tracks may not record in some
cases while the menu is displayed. As
audio will not play in this case, verify that
the video tracks are playing and then
activate playback.
When playback of a disc is completed:
If an audio CD is playing, the next CD
will be selected and playback will be-
gin automatically.
If a DVD video or video CD is playing,
playback will stop or the menu screen
will be displayed. The next disc will
not play back automatically. (Audio
tracks cannot be heard while the disc
is stopped) The title/chapter number and playback
time display may not appear while playing
back certain DVD video discs.
CAUTION
Conversational speech on some
DVDs is recorded at a low volume to
emphasize the impact of sound ef-
fects. If you adjust the volume as-
suming that the conversations repre-
sent the maximum vo
lume level that
the DVD will play, you may be
startled by louder sound effects or
when you change to a different au-
dio source. Loud sounds may have
a significant impact on the human
body or pose a driving hazard. Keep
this in mind when you adjust the
volume.
Page 163 of 187
4Runner_Navi_U (L/O 0208)
1552003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
3. Description of each switch
SWITCHES ON TOP PAGE
“SET UP” switch: The initial set up
screen appears. (See page 157.)
“
”, “Menu” and “Top Menu”
switches: If you touch any of the above
switches, the menu screen for DVD video
appears. (For the operation, see the
manual that came with the DVD video
disc provided separately.)
“Angle” switch: The angle selection
screen appears. (See page 157.)
“Sub Title” switch: The subtitle chang-
ing screen appears. (See page 156.)
“Audio” switch: The audio changing
screen appears. (See page 156.)
SWITCHES ON SECOND PAGE
“Search” switch: The title search screen
appears. (See page 155.)
“
” switch: Use this switch to pause
the video screen. When you touch this
switch again, the video screen advances
frame by frame.
“
” switch: Use this switch to stop
playing video. “
” switch: Touch this switch to resume
normal play after a stop or pause.
“ ” switch: Touch this switch to fast
reverse during playback and reverse
slowly during pause.
“ ” switch: Touch this switch to fast
forward during playback and play slowly
during pause.
“
” switch: Use this switch to display
a predetermined scene and start playing
from here.
NZN018
4. Searching by title