fuel filter TOYOTA 4RUNNER 2009 N280 / 5.G Owners Manual

474 6-1. Specifications
Lubrication system
*: 5W-30 is an oil that provides optimal levels of fuel efficiency.
Oil viscosity
● The 5W portion of the oil viscosity rating indicates the characteristic
of the oil which allows cold startab ility. Oils with a lower value before
the W allow for easier starting of the engine in cold weather.
● The 30 in 5W-30 indicates the oil viscosity when the oil is at its
operating temperature. An oil with a higher viscosity may be better
suited if the vehicle is operated at high speeds, or under extreme
load condition.
Oil capacity
drain and refill
(Reference)
4.0 L V6 (1GR-FE) engine
4.7 L V8 (2UZ-FE) engine With filter
5.5 qt. (5.2 L, 4.6 Imp.qt.)
Without filter 5.2 qt. (4.9 L, 4.3 Imp.qt.)
With filter 6.5 qt. (6.2 L, 5.5 Imp.qt.)
Without filter 6.0 qt. (5.7 L, 5.0 Imp.qt.)
Oil grade ILSAC multigrade engine oil
Recommended oil
viscosityUse Toyota approved “Toyota Genuine
Motor Oil” or equivalent to satisfy the grade
and viscosity shown below.
Outside temperature

520
GAS STATION INFORMATION
Auxiliary catch leverP. 3 7 2Fuel filler doorP. 8 5
Tire inflation pressure
P. 4 7 9
Hood lock release lever P. 3 7 2
Fuel tank capacity 23.0 gal. (87.0 L, 19.1 lmp.gal.)
Fuel type Unleaded gasoline, Octane Rating 87
(Research Octane Number 91) or higher
Cold tire inflation
pressure P. 4 7 9
Engine oil
capacity
(Drain and
refill)
4.0 L V6
(1GR-FE)
engineqt. (L, Imp.qt.)
With filter 5.5 (5.2, 4.6)
Without filter 5.2 (4.9, 4.3)
4.7 L V8
(2UZ-FE)
engine qt. (L, Imp.qt.)
With filter 6.5 (6.2, 5.5)
Without filter 6.0 (5.7, 5.0)
Engine oil type Toyota Genuine Motor Oil or equivalent
Oil grade: P. 474
ILSAC multigrade engine oil
Recommended oil viscosity: SAE 5W-30