navigation update TOYOTA 4RUNNER 2020 Accessories, Audio & Navigation (in English)

5
4RUNNER_Navi_(U)
This manual explains the opera-
tion of the system. Please read
this manual carefully to ensure
proper use. Keep this manual in
your vehicle at all times.
The screens shown in this man-
ual may differ from the actual
screen of the system depending
on availability of functions, con-
nected services subscription
status, and map data available
at the time this manual was pro-
duced.
The screens in this manual will
also differ if the screen theme
settings have been changed.
(Theme setting: P. 5 9 )
In some situations when chang-
ing between screens, it may
take longer than normal for the
screen to change, the screen
may be blank momentarily or
noise may be displayed.
Please be aware that the con-
tent of this manual may be dif-
ferent from the system in some
cases, such as when the sys-
tem’s software is updated.
The company names and prod-
uct names appearing on this
manual are trademarks and reg-
istered trademarks of their
respective companies. The navigation system is one of
the most technologically
advanced vehicle accessories
ever developed. The system
receives satellite signals from
the Global Positioning System
(GPS) operated by the U.S.
Department of Defense. Using
these signals and other vehicle
sensors, the system indicates
your present position and
assists in locating a desired des-
tination.
The navigation system is
designed to select efficient
routes from your present start-
ing location to your destination.
The system is also designed to
direct you to a destination that is
unfamiliar to you in an efficient
manner. The system uses AISIN
AW maps. The calculated routes
may not be the shortest nor the
least traffic congested. Your own
personal local knowledge or
“short cut” may at times be
faster than the calculated
routes.
The navigation system’s data-
base includes Point of Interest
categories to allow you to easily
select destinat
ions such as
restaurants and hotels. If a des-
tination is not in the database,
you can enter the street address
close to it and the system will
Introduction
Navigation and multimedia
system owner’s manual
Navigation system (Premium
Audio)

622-4. Other settings
4RUNNER_Navi_(U)
1Display the general settings
screen. ( P.59)
2 Select “Driver Setting”.
3 Select “Enable This Feature”.
1 Select “Manually Select
Linked Settings”.
2 Select the desired phone.
 After a few seconds, loaded
screen automatically switches
to the home screen.
Registered or changed per-
sonal settings will be deleted or
returned to their default condi-
tions.
1 Display the general settings
screen. ( P.59) 2
Select “Delete Personal
Data”.
3 Select “Delete”.
4 Select “Yes” when the confir-
mation screen appears.
Examples of settings that can be
returned to their default conditions:
Navigation settings*
Audio settings
 Phone settings
etc.
*: Premium Audio only
*: Vehicles equipped with DCM
only. This function is not made
available in some countries or
areas.
When the automatic update
check function is enabled, if a
software update is available
from the Cloud, a message will
be displayed.
1 Display the general settings
screen. ( P. 5 9 )
2 Select “Software Update Set-
ting”.
3 Select “Automatic Update
Check” to enable/disable the
Manually select linked set-
tings
Deleting personal data
Software update settings*

823-2. Destination search
4RUNNER_Navi_(U)
(province) by using “Address” or
“Point of Interest”.
1Display the destination
screen. ( P.81)
2 Select “Address” or “Point of
Interest”.
3 Select “Change State/Prov-
ince”.
 If a state (province) has not
been selected yet,
“State/Province” screen is dis-
played directly.
4 Select the desired state
(province).
 To change countries, select
“Change Country”.
To use this function, it is neces-
sary to register a home address.
( P. 9 9 )
1 Display the destination
screen. ( P.81)
2 Select “Home”.
 The navigation system per-
forms a search for the route
and the route overview is dis-
played. ( P. 8 9 ) The destination can be
searched by entering various
keywords.
1
Display the destination
screen. ( P. 8 1 )
2 Select “Search”.
3 Enter characters on the key-
board.
4 Select “Search”.
5 When there is more than 1
result, select the desired item
from the list.
: Select to display updated infor-
mation about the selected entry.
This function is displayed only
when there is information from the
Cloud.
●To search for a facility name using
multiple search words, put a
space between each word.
●Search results may differ depend-
ing on the connected services
subscription status and communi-
cation status.
To use this function, it is neces-
sary to register a favorites list
entry. ( P.100)
Setting home as destina-
tion
Searching by keyword
Searching by favorites list

893-2. Destination search
4RUNNER_Navi_(U)
3
Navigation system
“Add to Route”: Select to add a
destination to the current route.
Select to register as a mem-
ory point.
Select to call the registered
number.
Select to update information
about the selected entry.*
*: This function is displayed only when there is information from
the Cloud. ( P. 8 2 )
Current position
Destination point
Select to display a list of the
turns required to reach the
destination. ( P.90)
Select to change the route.
( P. 9 0 )
Select the desired route from
3 possible routes. ( P. 8 9 )
Type of route and its distance
Distance of the entire route
Select to start guidance.
Select and hold to start demo
mode. ( P. 8 9 )
Displayed when the route displayed is from the Cloud.
(
P.91)
Before starting the route guid-
ance, the demonstration of the
route guidance can be viewed.
1 Select and hold “OK” on the
route overview screen until a
beep sounds.
 Press the “HOME” or “MAP”
button to end demo mode.
1 Select “3 Routes”.
2 Select the desired route.
Displayed when the route
displayed is available from
the Cloud. ( )
Select to display the quick-
est route.
Select to display the route
that is the shortest distance
to the set destination.
Select to display the alterna-
tive route.
Select to display the informa-
tion about the 3 routes.
Route overview screen
B
C
D
A
B
C
D
E
F
G
H
I
6WDUWLQJGHPRPRGH
URXWHVVHOHFWLRQ
A
B
C
D
E

963-3. Route guidance
4RUNNER_Navi_(U)
●If a voice guidance command can-
not be heard, press the “MAP”
button to hear it again.
●To adjust the voice guidance vol-
ume: P. 6 3
●To mute the voice guidance:
 P. 9 2
●Voice guidance may be made
early or late.
●If the navigation system cannot
determine the current position cor-
rectly, you may not hear voice
guidance or may not see the mag-
nified intersection on the screen.
1 Select on the map
screen. ( P. 7 0 )
2 Select the desired item to be
set.
Select to display the over-
view of the entire route.
( P.89)
Select to reorder destina-
tions. ( P.97)
Select to change route type.
( P.97)
Select to set route prefer-
ences. ( P. 9 7 )
Select to set detours.
( P.97)
Select to start from adjacent
road. ( P. 9 8 )
 To hide the route options
screen, touch any part of the
map screen.
3 Check that the route over-
view is displayed. ( P.89)
Typical voice guid-
ance prompts
As the vehicle approaches
an intersection, or point,
where maneuvering the
vehicle is necessary, the
navigation system’s voice
guidance will provide vari-
ous messages.
WA R N I N G
●Be sure to obey the traffic regu-
lations and keep the road condi-
t i o n i n m i n d e s p e c i a l l y w h e n y o u
are driving on IPD roads (roads
that are not completely digitized
in our database). The route
guidance may not have the
updated information such as the
direction of a one way street.
Editing route
Displaying the edit route
screen
A
B
C
D
E
F

1133-5. Tips for operating the navigation system
4RUNNER_Navi_(U)
3
Navigation system
version.
 After replacing a tire: P.104
●This navigation system uses tire
turning data and is designed to
work with factory- specified tires
for the vehicle. Ins talling tires that
are larger or smaller than the orig-
inally equipped diameter may
cause inaccurate display of the
current position. The tire pressure
also affects the diameter of the
tires, so make sure that the tire
pressure of all 4 tires is correct.
1 Select on the map
screen. ( P. 7 0 )
2 Select “Map Data”.
3 Check that the map data
screen is displayed.
Map version
Select to display map cover-
age areas.
Select to display legal infor-
mation.
Select to update map.
●For map data updates, contact
your Toyota dealer.
*: This function is not made avail-
able in some countries or areas.
Map database version
and covered area
Coverage areas and legal
information can be dis-
played and map data can be
updated.
Map information
Temporary updates of the
map*
A
B
C
D

1143-5. Tips for operating the navigation system
4RUNNER_Navi_(U)
If the map data has been pro-
vided from the Cloud for any of
the following areas and the map
data in the navigation system is
older than what has been pro-
vided, the displayed map will be
updated temporarily:
• Areas around the area dis-played on the map screen
(example: areas around cur-
rent position)
• Areas around destinations
• Areas along the set route
●The updated data will temporarily
be saved in the navigation sys-
tem.
●If temporary updat e data exceeds
the available memory in the tem-
porary map cache, the oldest data
will be deleted.
●The temporary map data will dis-
appear when the expiration date
has passed.

235Alphabetical Index
4RUNNER_Navi_(U)
Home................................ 23, 82
Keyword ................................. 82
One-touch setting home/favorite ............................................. 87
Point of interest ...................... 85
Recent destinations................ 83
Search area............................ 81
Detailed navigation settings ......................................... 99, 103
Display button (Menu screen) . 14
E
ECO button (Information screen) ................................................. 19
Editing route ............................. 96
Entering letters and num- bers/list screen operation ..... 30Entering letters and numbers . 30
List screen .............................. 31
Entune App Suite button (Setup screen) .................................... 18
F
FM ............................................ 122
G
General button (Setup screen) ........................................... 18, 59
General settings ....................... 59 Displaying the general settings screen .................................. 59
General settings screen ......... 59
GPS (Global Positioning System) ............................................... 111
Guiding the route ..................... 21 Deleting destinations .............. 21
H
Hands-free system .................184
HOME button.......................12, 29
Home screen .............................29
I
Info button (Menu screen) .14, 19
Information screen ...................19
Initial screen..............................26Caution screen .......................26
Maintenance information ........26
Restarting the system .............26
Internet radio...........................131
iPod/iPhone (Apple CarPlay) .134
L
Linking multi-information display and the system .......................35
M
MAP button ...................12, 70, 72
Map database .......................... 113 Temporary updates of the map........................................... 113
Map screen information ...........74 Map icons ...............................78
Map options screen ................74
Map screen operation ........20, 72 Current position d isplay ....20, 72
Map scale .........................20, 72
Orientation of the map ............73
Scrolling the map ..............20, 73
Map screen overview ...............70
Memory points settings ...........99 Areas to avoid ......................101
Favorites list .........................100
Home ......................................99
MENU button .......................12, 14