high beam TOYOTA AVALON HYBRID 2013 XX40 / 4.G Owners Manual
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 2013, Model line: AVALON HYBRID, Model: TOYOTA AVALON HYBRID 2013 XX40 / 4.GPages: 512, PDF Size: 6.93 MB
Page 3 of 512
3
1
8 7
6
5
4
3
2
9
AVALON_HV_U (OM41451U)4-1. Before driving
Driving the vehicle ............. 166
Cargo and luggage............ 177
Vehicle load limits ............. 180
Trailer towing..................... 181
Dinghy towing.................... 182
4-2. Driving procedures Power (ignition) switch ...... 183
EV drive mode................... 189
Hybrid transmission........... 191
Turn signal lever................ 194
Parking brake .................... 195
Horn .................................. 196
4-3. Operating the lights and wipers
Headlight switch ................ 197
Automatic High Beam ....... 201
Fog light switch ................. 206
Windshield wipers and washer ............................ 207 4-4. Refueling
Opening the fuel tank cap................................... 212
4-5. Using the driving support systems
Cruise control .................... 217
Dynamic radar cruise control.............................. 221
Driving mode select switch .............................. 236
Driving assist systems ....... 238
Hill-start assist control ....... 243
PCS (Pre-Collision System)..... 245
BSM (Blind Spot Monitor)......... 251
4-6. Driving tips Hybrid vehicle driving tips ................................... 260
Winter driving tips .............. 262
4Driving
Page 87 of 512
872. Instrument cluster
2
Instrument cluster
AVALON_HV_U (OM41451U)
Warning lights inform the driver of malfunctions in the indicated vehi-
cle’s systems.
Warning lights
*1Brake system warning
light ( P. 412)*1
Slip indicator ( P. 414)
*1Charging system warn-
ing light (P. 413)*1Brake system warning
light (P. 414)
*1Malfunction indicator
lamp ( P. 413)Open door warning light
(P. 414)
*1SRS warning light
(P. 413)Low fuel level warning
light ( P. 415)
*1ABS warning light
(P. 413)Seat belt reminder light
(P. 415)
*1Electric power steering
system warning light
(P. 413)*1Master warning light
(P. 415)
*1Low engine oil pressure
warning light ( P. 413)*1Tire pressure warning
light (P. 415)
*1, 2
(if equipped)
“PCS” warning light
(P. 414)
*2
(if equipped)
Automatic high beam
indicator ( P. 201)
Page 89 of 512
892. Instrument cluster
2
Instrument cluster
AVALON_HV_U (OM41451U)
The indicators inform the driver of the operating state of the vehicle’s
various systems.
Indicators
Turn signal indicator
( P. 194) EV drive mode indicator
(
P. 189)
Headlight indicator
( P. 197) Eco drive mode indicator
(
P. 236)
Headlight high beam
indicator ( P. 198) Sport mode indicator
(
P. 236)
(if equipped)
Front fog light indicator
(P. 206)
(if equipped)
Automatic high beam
indicator ( P. 201)
“READY” indicator
( P. 183)
*1, 2 Slip indicator
(P. 239)
EV indicator ( P. 7 1 )
*1VSC OFF indicator
(P. 239)
Security indicator
( P. 79, 81)
*1, 3
(if equipped)
“PCS” warning light
(P. 246)
*1“TRAC OFF” indicator
(P. 239)*1“AIR BAG ON/OFF” indi-
cator (P. 47)
(if equipped)
Cruise control indicator
(P. 217) Cruise control set indica-
tor (
P. 217, 221)
(if equipped)
Radar cruise control
indicator ( P. 221)
AIR BAG
Page 165 of 512
165
4Driving
AVALON_HV_U (OM41451U)4-1. Before driving
Driving the vehicle ............. 166
Cargo and luggage ........... 177
Vehicle load limits ............. 180
Trailer towing..................... 181
Dinghy towing ................... 182
4-2. Driving procedures Power (ignition) switch ...... 183
EV drive mode .................. 189
Hybrid transmission........... 191
Turn signal lever................ 194
Parking brake .................... 195
Horn .................................. 196
4-3. Operating the lights and wipers
Headlight switch ................ 197
Automatic High Beam ....... 201
Fog light switch ................. 206
Windshield wipers and washer ............................ 207 4-4. Refueling
Opening the fuel tank cap .................................. 212
4-5. Using the driving support systems
Cruise control .................... 217
Dynamic radar cruise control ............................. 221
Driving mode select switch .............................. 236
Driving assist systems ...... 238
Hill-start assist control ....... 243
PCS (Pre-Collision System) .... 245
BSM (Blind Spot Monitor) ........ 251
4-6. Driving tips Hybrid vehicle driving tips .................................. 260
Winter driving tips ............. 262
Page 198 of 512
1984-3. Operating the lights and wipers
AVALON_HV_U (OM41451U)
With the headlights on, push
the lever away from you to turn
on the high beams.
Pull the lever toward you to the
center position to turn the high
beams off.
Pull the lever toward you and
release it to flash the high
beams once.
You can flash the high beams with
the headlights on or off.
Turning on the high beam headlights
1
2
Page 199 of 512
1994-3. Operating the lights and wipers
4
Driving
AVALON_HV_U (OM41451U)
■Daytime running light system
●Vehicles with halogen headlights: To make your vehicle more visible to other
drivers, the headlight high beam turn on automatically (at a decreased inten-
sity) whenever the hybrid system is started and the parking brake is
released. Daytime running lights are not designed for use at night.
Vehicles with discharge headlights: To make your vehicle more visible to
other drivers, the parking lights turn on automatically (at an increased inten-
sity) whenever the hybrid system is started and the parking brake is
released. Daytime running lights are not designed for use at night.
Daytime running lights can be turned off by operating the switch.
● Compared to turning on the headlights, the daytime running light system
offers greater durability and consumes less electricity, so it can help improve
fuel economy.
■ Headlight control sensor
■ Automatic light off system
When the light switch is in : The headlights and tail lights turn off 30 sec-
onds after the power switch is turned to ACCESSORY mode or turned off and
a door is opened and all of the doors and trunk are closed. (The lights turn off
immediately if on the key is pressed twice after all the doors are
closed.)
To turn the lights on again, turn the power switch to ON mode, or turn the light
switch off once and then back to or .
If any of the doors or trunk lid is kept open, the lights automatically turn off
after 20 minutes.
■ Light reminder buzzer
A buzzer sounds when the power switch is turned off or turned to ACCES-
SORY mode and the driver’s door is opened while the lights are turned on.
■ Automatic headlight leveling system (if equipped)
The level of the headlights is automatically adjusted according to the number
of passengers and the loading condition of the vehicle to ensure that the
headlights do not interfere with other road users. The sensor may not function properly if an
object is placed on the sensor, or anything
that blocks the sensor is affixed to the
windshield.
Doing so interferes with the sensor
detecting the level of ambient light and
may cause the automatic headlight sys-
tem to malfunction.
Page 201 of 512
2014-3. Operating the lights and wipers
4
Driving
AVALON_HV_U (OM41451U)
Put the headlight switch in the
“AUTO” position.
Push the lever away from you.
The Automatic High Beam indica-
tor will come on when the head-
lights are turned on automatically
to indicate that the system is
active.
Automatic High Beam
: If equipped
The Automatic High Beam uses an in-vehicle camera sensor to
assess the brightness of streetlights, the lights of oncoming and
preceding vehicles, etc., and au tomatically turns high beam on
or off as necessary.
Activating the Automatic High Beam system
1
2
Page 202 of 512
2024-3. Operating the lights and wipers
AVALON_HV_U (OM41451U)
When all of the following conditions are fulfilled, high beam will be
automatically turned on (after approximately 1 second):
●Vehicle speed is above appr oximately 25 mph (40 km/h).
● The area ahead of the vehicle is dark.
● There are no oncoming or preceding vehicles with headlights or tail
lights turned on.
If any of the following conditions are fulfilled, high beam will be auto-
matically turned off:
● Vehicle speed drops below approximately 19 mph (30 km/h).
● The area ahead of the vehicle is not dark.
■Switching to low beam
Pull the lever to original posi-
tion.
■Switching to high beam
Turn the light switch to
position.
The Automatic High Beam indi-
cator will turn off and the high
beam indicator will turn on.
Press the switch to activate the
Automatic High Beam system
again.
High beam automatic turning on or off conditions
Turning the high beam on/off manually
Page 203 of 512
2034-3. Operating the lights and wipers
4
Driving
AVALON_HV_U (OM41451U)
■The Automatic High Beam can be operated when
The power switch is in ON mode.
■ Camera sensor detection information
●High beam may not be automatically turned off in the following situations:
• When oncoming vehicles suddenly appear from a curve
• When the vehicle is cut in front of by another
● High beam may be turned off if an oncoming vehicle that is using fog lights
without using the headlights is detected.
● House lights, street lights, red traffic signals, and illuminated billboards or
signs may cause the high beam to turn off.
● The following factors may affect the amount of time taken to turn high beam
on or off:
• The brightness of headlights, fog lights, and tail lights of oncoming and
preceding vehicles
• The condition of the road (gradient, curve, condition of the road surface etc.)
• The number of passengers and amount of luggage
● High beam may be turned on or off when unexpected by the driver.
Page 204 of 512
2044-3. Operating the lights and wipers
AVALON_HV_U (OM41451U)●
In the situations below, the system may not be able to correctly detect the
surrounding brightness levels, and may flash or expose nearby pedestrians
to the high beam. Therefore, you should consider turning the high beams on
or off manually rather than relying on the Automatic High Beam system.
• In bad weather (rain, snow, fog, sandstorms etc.)
• The windshield is obscured by fog, mist, ice, dirt etc.
• The windshield is cracked or damaged.
• The inside rear view mirror or ca mera sensor is deformed or dirty.
• Surrounding brightness levels are equal to those of headlights, tail lights or fog lights.
• Vehicles ahead have headlights that are either switched off, dirty, are changing color, or have are not aimed properly.
• When driving through an area of in termittently changing brightness and
darkness.
• When frequently and repeatedly driving ascending/descending roads, or roads with rough, bumpy or uneven surfaces (such as stone-paved
roads, gravel tracks etc.).
• When frequently and repeatedly taking curves or driving on a winding road.
• There is a highly reflective object ahead of the vehicle, such as a sign or a mirror.
• The vehicle’s headlights are damaged or dirty.
• The vehicle is listing or tilting, due to a flat tire etc.
• The driver believes that the high beam may be causing problems or dis- tress to other drivers or pedestrians nearby.
■ If the Automatic High Beam indicator flashes
It may indicate a malfunction in the system. Contact your Toyota dealer.
■ Customization
The automatic high beam can be deactivated.
(Customizable feature: P. 477)
CAUTION
■Limitations of the Automatic High Beam
Do not rely on the Automatic High Beam. Always drive safely, taking care to
observe your surroundings and turning high beam on or off manually if nec-
essary.