navigation TOYOTA AVENSIS 2005 Service User Guide

I34723
6
8N4 M2
7
12 3VG
R GB SYNC
VRR VG
G SYNC
VR B W
R G
Y18
3
7
26Navigation ECU
B M2
M2
M2
M2
M2(Shielded) Multi±display
(CRT Display) Display
N4
N4
N4
N4
N4
± DIAGNOSTICSNAVIGATION SYSTEM
05±1475
AVENSIS REPAIR MANUAL (RM1018E)
NAVIGATION SCREEN IS NOT STABILIZED (SYNCRONOUS
ERROR)
WIRING DIAGRAM
05C3L±01

I35666
Multi±display (CRT Display) Display:Navigation ECU: SYNCVR
VG
SYNC VGVR
M2
N4
05±1476
±
DIAGNOSTICS NAVIGATION SYSTEM
AVENSIS REPAIR MANUAL (RM1018E)
INSPECTION PROCEDURE
1CHECK HARNESS AND CONNECTOR(MULTI±DISPLAY (CRT DISPLAY)DISPLAY ± NAVIGATION ECU)
(a)Disconnect the connectors from the multi±display (CRT
display)display and navigation ECU.
(1)Check continuity between the terminals at each
condition, as shown in the chart.
Standard:
Tester connectionSpecified condition
VG ± VGContinuity
VR ± VRContinuity
SYNC ± SYNCContinuity
(2)Check for a short between the terminals at each condition, as shown in the chart.
Standard:
Tester connectionSpecified condition
VG ± Body groundContinuity
VR ± Body groundContinuity
SYNC ± Body groundNo continuity
NGREPAIR OR REPLACE HARNESS OR CONNECTOR
OK
2REPLACE MULTI±DISPLAY (CRT DISPLAY) DISPLAY (See page 67±6)
Standard: Normally returns. NG REPLACE NAVIGATION ECU (See page 67±27)
OK
SYSTEM OK

I34725
Multi±display
(CRT Display) Display
CTX±
CTX+
TX3+
TX3±
GTX+
GTX±M2
M1 M2
M1
M1
M110
5
12
24
5
18LG
V
G±Y
G
P
LG10
5Navigation ECU
Body ECU
(Combination Meter Assy)
Radio Receiver Assy3
4
9
10 C10
C10
R6
R6N4
N4TX±
TX+
TX± TX+
± DIAGNOSTICSNAVIGATION SYSTEM
05±1471
AVENSIS REPAIR MANUAL (RM1018E)
AVC±LAN CIRCUIT
WIRING DIAGRAM
INSPECTION PROCEDURE
1 INSPECT APPARATUS
(a) Choose the apparatus to be inspected.
ApparatusGo to step
Radio receiver assyA
Navigation ECUB
Body ECU (Combination Meter Assy)C
B Go to step 4
C Go to step 6
A
05C3K±01

I35665
GTX+GTX±
TX+
TX±
Radio Receiver Assy: Multi±display (CRT Display) Display:
M2
R12
05±1472
±
DIAGNOSTICS NAVIGATION SYSTEM
AVENSIS REPAIR MANUAL (RM1018E)
2SERVICE CHECK MODE(RADIO RECEIVER ASSY)
(a)Perform the service check. (1)Start the diagnosis system and read the check result for the radio recei\
ver assy.
Standard:
AºNCONº is displayed or nothing is displayed (AUDIO H/U)
BºGOODº is displayed
BREPLACE MULTI±DISPLAY (CRT DISPLAY) DISPLAY (See page 67±6)
A
3CHECK HARNESS AND CONNECTOR(MULTI±DISPLAY (CRT DISPLAY) DISPLAY ± RADIO RECEIVER ASSY)
(a)Disconnect the connectors from the multi±display (CRT
display) display and radio receiver assy.
(1)Check continuity between the terminals at eachcondition, as shown in the chart.
Standard:
Tester connectionSpecified condition
GTX+ ± TX+Continuity
GTX± ± TX±Continuity
(2)Check for a short between the terminals at each condition, as shown in the chart.
Standard:
Tester connectionSpecified condition
GTX+ ± Body groundNo continuity
GTX± ± Body groundNo continuity
NGREPAIR OR REPLACE HARNESS OR CONNECTOR
OK
REPLACE RADIO RECEIVER ASSY (See page 67±5)

I35666
CTX+CTX±
TX+
TX±
Navigation ECU: Multi±display (CRT Display) Display:
M3
N7
±
DIAGNOSTICS NAVIGATION SYSTEM
05±1473
AVENSIS REPAIR MANUAL (RM1018E)
4SERVICE CHECK MODE(NAVIGATION ECU)
(a)Perform the service check.
(1)Start the diagnosis system and read the check result for the navigation \
ECU.
Standard:
AºNCONº is displayed or nothing display (NAVI)
BºGOODº is display
BREPLACE MULTI±DISPLAY (CRT DISPLAY) DISPLAY (See page 67±6)
A
5CHECK HARNESS AND CONNECTOR(MULTI±DISPLAY (CRT DISPLAY) DISPLAY ± NAVIGATION ECU)
(a)Disconnect the connectors from the multi±display (CRT
display) display and navigation ECU.
(1)Check continuity between the terminals at eachcondition, as shown in the chart.
Standard:
Tester connectionSpecified condition
CTX+ ± TX+Continuity
CTX± ± TX±Continuity
(2)Check for a short between the terminals at each condition, as shown in the chart.
Standard:
Tester connectionSpecified condition
CTX+ ± Body groundNo continuity
CTX± ± Body groundNo continuity
NGREPAIR OR REPLACE HARNESS OR CONNECTOR
OK
REPLACE NAVIGATION ECU (See page 67±27)

I35875
Multi±display (CRT Display) Display:Body ECU (Combination Meter Assy): TX3+
TX3± GTX+
GTX±
M1
C10
05±1474
±
DIAGNOSTICS NAVIGATION SYSTEM
AVENSIS REPAIR MANUAL (RM1018E)
6SERVICE CHECK MODE(BODY ECU)
(a)Perform the service check. (1)Start the diagnosis system and read check result for body ECU.
Standard:
AºNCONº is displayed or nothing display (BODY)
BºGOODº is display
BREPLACE MULTI±DISPLAY (CRT DISPLAY) DISPLAY (See page 67±6)
A
7CHECK HARNESS AND CONNECTOR(MULTI±DISPLAY (CRT DISPLAY) DISPLAY ± BODY ECU)
(a)Disconnect the connectors from the multi±display (CRT
display) display and body ECU (Combination meter
assy).
(1)Check continuity between the terminals at eachcondition, as shown in the chart.
Standard:
Tester connectionSpecified condition
TX3+ ± GTX+Continuity
TX3± ± GTX±Continuity
(2)Check short between the terminals at each condi- tion, as shown in the chart.
Standard:
Tester connectionSpecified condition
TX3+ ± Body groundNo continuity
TX3± ± Body groundNo continuity
NGREPAIR OR REPLACE HARNESS OR CONNECTOR
OK
REPLACE COMBINATION METER ASSY (See page 71±21)

I34728
I13
Ignition SW
32
AM1 ACC
G±R34
11 DH
DH DNDB RAD No.1
AM1 GDriver Side J/BFF
(*3) (*4)J8 J20
FF
(*3) (*4)J8 J20J/CACC
B±G (*1)
B±G (*1)
B (*2) B±G (*1)
FL MAIN
Battery
*1: Gasoline
*2: 1CD±FTV
*3: LHD
*4: RHD1
4BALT
121
4D
3
3 ALT
12GR (*3)
HH
(*3) (*4)J9 J21
1
ED1 B±L (*2)
W (*2)
W (*2)
GND
1
A
J17
J/C
IP (*3)
IK (*4)N4
Navigation Controller Holder
GR
GR(*4)
W±B5
A Engine Room R/B J/B
Engine Room R/B No.3
W±B
± DIAGNOSTICSNAVIGATION SYSTEM
05±1469
AVENSIS REPAIR MANUAL (RM1018E)
POWER SOURCE CIRCUIT (NAVIGATION CONTROLLER HOLDER)
WIRING DIAGRAM
05C3J±01

I35658
GND
ACC
N4
05±1470
±
DIAGNOSTICS NAVIGATION SYSTEM
AVENSIS REPAIR MANUAL (RM1018E)
1INSPECT NAVIGATION CONTROLLER HOLDER(ACC, GND)
(a)Remove the navigation controller holder.
(b)Check continuity between the terminals at each condi- tion, as shown in the chart.
Standard:
Tester connectionConditionSpecified condition
GND ± Body groundConstantContinuity
(c)Check the voltage between the terminals at each condi-tion, as shown in the chart.
Standard:
Tester connectionConditionSpecified condition
ACC ± GNDIgnition SW ACC10 to 14 V
NGREPAIR OR REPLACE HARNESS OR CONNECTOR
OK
2CHECK FOR PROBLEM SYMPTOMS TABLE
(a)Check the problem symptoms table (See page 05±1464).
ASuspected areas are cleared
BSuspected areas still exist
B PROCEED TO NEXT CIRCUIT INSPECTION SHOWN ON PROBLEM SYMPTOMS TABLE
(See page 05±1464)
A
REPLACE NAVIGATION CONTROLLER HOLDER

I34727
Center J/B
10
CB4
CEL±Y (*3)
L±Y (*4)
(*3) L±YFuse Block
66
21RAD No.2J/C
EE
J24 J25L±Y
(*4)N69Navigation ECU
B±W
B±W+B
Engine Room R/B No.1 and Engine Room J/B No.1
45
IF4 IF1 B±W
(*3) (*4) 1
1
12 1ADCC B (*2)
B±G (*1)
I13
Ignition SW
32
AM1 ACC
G±R34
11 DH
DH DNDB RAD No.1
AM1 GGRDriver Side J/B
FF FF
(*3) (*4)J8 J20
(*3) (*4)J8 J20GR18
N6ACC
B±L (*2) W (*2)
ED11
Engine Room R/B J/B
1
4A
1
4BALT
121
4D B±G (*1) B±G (*1)
B (*2)
B (*2)3
33ALT
12
FL MAIN
Battery
IP W (*2)W (*2)
Center J/B
W±B6
CA13
7
10 CF
CK
CHW±B (*3)
W±B
(*4)7
17 N5
N6SNSE
GND
*1: Gasoline
*2: 1CD±FTV*3: LHD
*4: RHDJ/C
Engine Room R/B No.3
W±B
± DIAGNOSTICSNAVIGATION SYSTEM
05±1467
AVENSIS REPAIR MANUAL (RM1018E)
POWER SOURCE CIRCUIT (NAVIGATION ECU)
WIRING DIAGRAM
05C3I±01

I32703
+B
ACC
SNSEGND
N5N6
05±1468
±
DIAGNOSTICS NAVIGATION SYSTEM
AVENSIS REPAIR MANUAL (RM1018E)
INSPECTION PROCEDURE
1INSPECT NAVIGATION ECU(+B, ACC, SNSE, GND)
(a)Remove the navigation ECU.
(b)Check continuity between the terminals at each condi- tion, as shown in the chart.
Standard:
Tester connectionConditionSpecified condition
GND ± Body groundAlwaysContinuity
SNSE ± Body groundAlwaysContinuity
(c)Check the voltage between the terminals at each condi-
tion, as shown in the chart.
Standard:
Tester connectionConditionSpecified condition
+B ± GNDAlways10 to 14 V
ACC ± GNDIgnition SW ACC, ON10 to 14 V
NGREPAIR OR REPLACE HARNESS OR CONNECTOR
OK
2CHECK FOR PROBLEM SYMPTOMS TABLE
(a)Check the problem symptoms table (See page 05±1464).
ASuspected areas are cleared
BSuspected areas still exist
B PROCEED TO NEXT CIRCUIT INSPECTION SHOWN ON PROBLEM SYMPTOMS TABLE
(See page 05±1464)
A
REPLACE NAVIGATION ECU (See page 67±27)