navigation update TOYOTA AVENSIS 2005 Service Repair Manual

I34703
*1
*2
I34704
*1
± DIAGNOSTICSNAVIGATION SYSTEM
05±1447
AVENSIS REPAIR MANUAL (RM1018E)
(c) Remote Commander Check
(1) Start the Diagnosis system.
(2) Select ºMENUº.
(3) Select ºDisplay Checkº.
(4) Select ºRemote Commander Checkº.
(5) Press each switch and make sure that it corre-
sponds to the display on the screen.
Display DataDescription
Names of push±button switches/*1Names of push±button switches pressed
are navigation controller assy.
Disp MENU*2Pressing this switch returns to the ºDis-
play Checkº.
(d) Display Vehicle Signal Check
(1) Start the Diagnosis system.
(2) Select ºMENUº.
(3) Select ºDisplay Checkº.
(4) Select ºVehicle Signal Checkº.
(5) Check the status of the vehicle signal (Battery, IG,
PKB, SPEED, TAIL) loaded into the display.
HINT:
Vehicle signal data is updated every 1 second.
Display ItemMeaning
BatteryBattery voltage is displayed by V.
IGIG (Signal State) is displayed by ON/
OFF.
PKBIG (Signal State) is displayed by ON/
OFF. (IG switch ON)
SPEEDSPEED is displayed by calculating the
vehicle speed from the pulse signal.
TAILTAIL (Signal State) is displayed by ON/
OFF.
Disp MENU/*1Pressing this switch returns to the ºDis-
play Checkº.

I34705
*1
*2
*3
*4*5*6
± DIAGNOSTICSNAVIGATION SYSTEM
05±1449
AVENSIS REPAIR MANUAL (RM1018E)
(a) Navigation Check
DisplayDescription
GPS Information/*1Information related to GPS is displayed
(updated every 1 second.).
Vehicle Sensors/*2
Vehicle signal information to be loaded in
the Navigation ECU is displayed (up-
dated every 1 second.).
Color Bar Check/*3
Color display of the Navigation ECU is
checked. (Compare with the Color Bar
Check results in the Display Check.)
Memory Copy / Paste/*4This function is not available.
Parts Information/*5Navigation program version and disc
version are displayed.
Menu/*6Pressing this switch returns to the ºDiag-
nosis MENUº.
HINT:

In the Navigation Check, the checks mentioned above
can be conducted.

The Navigation ECU operates each Navigation Check.