reset TOYOTA C-HR 2016 Owner's Manual

7088-2. Steps to take in an emergency
C-HR_OM_Europe_OM10528E
■ If the following messages are shown (AWD models only)
The system may be an overheated. Reduce the vehicle speed or stop the
vehicle in a safe place.
• “AWD System Overheated 2WD Mode Engaged”
• “AWD System Overheated Switching to 2WD Mode”
■ If “Oil Maintenance Required Soon” is shown
Indicates that the engine oil is scheduled to be changed. (The indicator will
not work properly unless the message has been reset.)
Check the engine oil, and change if necessary. After changing the engine oil,
the message should be reset. ( P. 621)
■ If “Oil Maintenance Required Visit Your Dealer.” is shown
Indicates that the engine oil should be changed. (After the engine oil is
changed and the message has been reset.)
Check and change the engine oil, and oil filter by any authorized Toyota
retailer or Toyota authorized repairer, or any reliable repairer. After changing
the engine oil, the message should be reset. ( P. 621)
■ If “A New Key has been Registered Contact Your Dealer for Details” is
shown (vehicles with a smart entry & start system)
This message will be displayed each time the driver's door is opened when
the doors are unlocked from the outside for approximately one week after a
new electronic key has been registered.
If this message is displayed but you have not had a new electronic key regis-
tered, ask any authorized Toyota retailer or Toyota authorized repairer, or any
reliable repairer to check if an unknown electronic key (other than those in
your possession) has been registered.

7799-2. Customization
9
Vehicle specifications
C-HR_OM_Europe_OM10528E
■Gauges, meters and multi-information display ( P. 124, 128)
FunctionDefault settingCustomized
setting
Language*1English*2OOO
Units*1km (L/100 km)km (km/L)OOOmiles (MPG)
Eco Driving Indicator
Light*3On
(Self-lighting)OffO–O
Drive information 1*3
Current fuel
consumption
(gauge dis-
play)
*4O–O
Average fuel
economy
(after reset)
Drive information 2*3
Distance
(driving range)
*4O–OAverage vehi-
cle speed
(after reset)
Drive information 3*3
Stop & Start
system
operation time
(after start)
*4O–OStop & Start
system
operation time
(after reset)
Pop-up display*3OnOffO–O
123

7809-2. Customization
C-HR_OM_Europe_OM10528E
*1: The default setting varies according to country.
*2: Vehicles with monochrome display:
French, German, Spanish, Italian, Portuguese, Russian, Turkish
Vehicles with color display:
German, French, Spanish, Italian, Portuguese, Dutch, Swedish, Norwe-
gian, Danish, Russian, Finnish, Greek, Polish, Ukrainian, Turkish, Hungar-
ian, Czech, Slovak, Romanian
*3: Vehicles with color display only
*4: 2 of the following items: current fuel consumption (gauge display), current
fuel consumption (numerical display), average fuel economy (after reset),
average fuel economy (after start), average fuel economy (after refuel),
average vehicle speed (after reset), average vehicle speed (after start),
elapsed time (after reset), elapsed ti me (after start), distance (driving
range), distance (after start), blank.
■Instrument cluster ( P. 122, 132)
FunctionDefault settingCustomized
setting
Sensor sensitivity for
darkening the brightness
of the instrument cluster
depending on the outside
brightness
Standard-2 to 2––O
Sensor sensitivity for
returning the brightness of
the instrument cluster to
the original level depend-
ing on the outside bright-
ness
Standard-2 to 2––O
123