ECO mode TOYOTA C_HR HYBRID 2016 Owners Manual

8
C-HR_HV_OM_Europe_OM10538E
For your information
Please note that this manual applies to all models and explains all equipment,
including options. Therefore, you may find some explanations for equipment
not installed on your vehicle.
All specifications provided in this manual are current at the time of printing.
However, because of the Toyota policy of continual product improvement, we
reserve the right to make changes at any time without notice.
Depending on specifications, the vehicle shown in the illustrations may differ
from your vehicle in terms of equipment.
Both genuine Toyota and a wide variety of other spare parts and accessories
for Toyota vehicles are currently avai lable on the market. Should it be deter-
mined that any of the genuine Toyota parts or accessories supplied with the
vehicle need to be replaced, Toyota recommends that genuine Toyota parts
or accessories, be used to replace them. Other parts or accessories of
matching quality can also be used.
Toyota cannot accept any liability or guarantee spare parts and accessories
which are not genuine Toyota products, nor for replacement or installation
involving such parts. In addition, damage or performance problems resulting
from the use of non-genuine Toyota spare parts or accessories may not be
covered under warranty.
Main Owner’s Manual
Accessories, spare parts and modification of your Toyota

351-1. For safe use
1
For safety and security
C-HR_HV_OM_Europe_OM10538E
WARNING
Observe the following precautions.
Failure to do so may cause the driver’s floor mat to slip, possibly interfering
with the pedals while driving. An unexpectedly high speed may result or it may
become difficult to stop the vehicle. This could lead to an accident, resulting in
death or serious injury.
■ When installing the driver’s floor mat
● Do not use floor mats designed for other models or different model year
vehicles, even if they are Toyota Genuine floor mats.
● Only use floor mats designed for the driver’s seat.
● Always install the floor mat securely using the retaining hooks (clips) pro-
vided.
● Do not use two or more floor mats on top of each other.
● Do not place the floor mat bottom-side up or upside-down.
■ Before driving
●Check that the floor mat is securely
fixed in the correct place with all the
provided retaining hooks (clips). Be
especially careful to perform this check
after cleaning the floor.
● With the hybrid system stopped and the
shift lever in P, fully depress each pedal
to the floor to make sure it does not
interfere with the floor mat.

571-2. Child safety
1
For safety and security
C-HR_HV_OM_Europe_OM10538E
Airbag manual on-off system
“PASSENGER AIR BAG” indi-
cator
The “PASSENGER AIR BAG” and
“ON” indicator light turns on when
the airbag system is on, and about
after 60 seconds they go off (only
when the power switch is in ON
mode).
Airbag manual on-off switch
: If equipped
This system deactivates the front passenger airbag.
Only deactivate the airbag when using a child restraint system
on the front passenger seat.
1
2

1182. Instrument cluster
C-HR_HV_OM_Europe_OM10538E
*1: These lights turn on when the power switch is turned to ON mode to indi-
cate that a system check is being performed. They will turn off after the
hybrid system is on, or after a few seconds. There may be a malfunction in
a system if a light does not come on, or if the lights do not turn off. Have
the vehicle inspected by any authorized Toyota retailer or Toyota autho-
rized repairer, or any reliable repairer.
*2: The light comes on to indicate a malfunction.
*3: The light flashes to indicate a malfunction.
Driver’s and front passenger’s seat belt
reminder light P. 5 9 9
Rear passengers’ seat belt reminder lights (on
the center panel) P. 5 9 9
*1Tire pressure warning light P. 599
*1Master warning light P. 6 0 0
Warning lightsPages

1202. Instrument cluster
C-HR_HV_OM_Europe_OM10538E
*1: These lights turn on when the power switch is turned to ON mode to indi-
cate that a system check is being performed. They will turn off after the
hybrid system is on, or after a few seconds. There may be a malfunction in
a system if a light does not come on, or if the lights do not turn off. Have
the vehicle inspected by any authorized Toyota retailer or Toyota autho-
rized repairer, or any reliable repairer.
Toyota parking assist-sensor indicator (if
equipped) P. 3 5 2
S-IPA indicator (if equipped) P. 365
*1“BSM” indicator (if equipped) P. 335
*2BSM outside rear view mirror indicator
(on the outside rear view mirrors) (if equipped) P. 3 3 5
“RCTA” indicator (if equipped) P. 335
Security indicator (on the center panel) P. 99,
106
*1, 3Slip indicator light P. 404
*1VSC off indicator P. 405
*1, 4PCS warning light (if equipped) P. 278
*1“PASSENGER AIR BAG” indicator (on the
center panel) (if equipped) P. 5 7
IndicatorsPages

1212. Instrument cluster
2
Instrument cluster
C-HR_HV_OM_Europe_OM10538E
*2: In order to confirm operation, the BSM outside rear view mirror indicators
illuminate in the following situations:
• When the power switch is turned to ON mode, the BSM function is
enabled on the screen of the multi-information display.
• When the BSM function is enabled on the screen of the multi-
information display, the power switch is in ON mode.
If the system is functioning correctly, the BSM outside rear view mirror indi-
cators will turn off after a few seconds.
If the BSM outside rear view mirror indicators do not illuminate or do not
turn off, there may be a malfunction in the system.
If this occurs, have the vehicle inspected by any authorized Toyota retailer
or Toyota authorized repairer, or any reliable repairer.
*3: The light flashes to indicate that the system is operating.
*4: The light turns on when the system is off.

1222. Instrument cluster
C-HR_HV_OM_Europe_OM10538E
Indicators and symbols displayed on the multi-information dis-
play
IndicatorsPages
*
Brake hold operated indicator P. 241
*
Brake hold standby indicator P. 241
LDA indicator (if equipped) P. 289
Speed limiter indicator (if equipped) P. 330
Cruise control indicator (if equipped) P. 317,
322
Cruise control “SET” indicator (if equipped) P. 317,
322
Radar cruise control indicator (if equipped) P. 307
“SPORT” indicator P. 328
“ECO MODE” indicator P. 328

1232. Instrument cluster
2
Instrument cluster
C-HR_HV_OM_Europe_OM10538E
*: These lights turn on when the power switch is turned to ON mode to indi-
cate that a system check is being performed. They will turn off after the
hybrid system is on, or after a few seconds. There may be a malfunction in
a system if a light does not come on, or if the lights do not turn off. Have
the vehicle inspected by any authorized Toyota retailer or Toyota autho-
rized repairer, or any reliable repairer.
EV Indicator P. 89
EV drive mode indicator P. 228
Speed limit sign (if equipped) P. 301
Low outside temperature indicator P. 125
IndicatorsPages

1272. Instrument cluster
2
Instrument cluster
C-HR_HV_OM_Europe_OM10538E
■The meters and display illuminate when
The power switch is turned to ON mode.
■ Hybrid System Indicator
Eco area
Shows that the vehicle is being driven in an Eco-friendly manner.
Power area
Shows that an Eco-friendly driving range is being exceeded (during full
power driving, etc.)
● By keeping the indicator needle within Eco area, more Eco-friendly driving
can be achieved.
● Charge area indicates regeneration* status. Regenerated energy will be
used to charge the hybrid battery (traction battery).
*: When used in this manual, “regeneration” refers to the conversion of
energy created by the movement of the vehicle into electrical energy.
Charge area
Shows that energy is being recovered
via the regenerative brake.
Hybrid Eco area
Shows that gasoline engine power is
not being used very often.
The gasoline engine will automatically
stop and restart under various condi-
tions.
1
2
3
4

1412. Instrument cluster
2
Instrument cluster
C-HR_HV_OM_Europe_OM10538E
Press , and then select “Trip information” or “Past record” on the
screen.
■Trip information
Average vehicle speed
Cruising range
Previous fuel consumption
per minute
Current fuel consumption
Reset the trip information
data
Elapsed time
Regenerated energy in the past 15 minutes
“Energy monitor” screen appears
“Past record” screen appears
Average fuel consumption for the past 15 minutes is divided by
color into past averages and averages attained since the power
switch was last turned to ON mode. Use the displayed average
fuel consumption as a reference.
These images are examples only, and may vary slightly from actual con-
ditions.
Fuel consumption
1
2
3
4
5
6
7
8
9