Radiator support TOYOTA CAMRY 2000 Service User Guide

RADIATOR SUPPORT (ASSY)
REMOVAL
Front Side Member
Extension
1. After removing the front side member exten-
sion, removing the radiator support.
BODY PANEL REPLACEMENTRE-10

FRONT FENDER FRONT APRON (ASSY)
REMOVAL (With the radiator support removed.)
BODY PANEL REPLACEMENTRE-12

FRONT FENDER APRON (ASSY)
REMOVAL (With the radiator support, cowl top side panel
removed.)
BODY PANEL REPLACEMENTRE-16

K±k
1,526
(60.08)
Vehicle Dimensions Left e Right
C±K
or
c±k
826
(35.52)1,712
(67.40)C±k
or
c±K
HINT: For symbols, capital letters indicate right side of vehicle,
small letters indicate left side of vehicle (Seen from rear.)
mm (in.)
(Three±Dimensional Distance)
Hole dia.
10 (0.39)
10 (0.39)
12 (0.47)
8 (0.315) nut
3R (0.12) Name
Radiator support standard hole
Radiator support standard hole
Front crossmember standard hole
Hood hinge installation nut±rear
Front Fender apron to cowl side member cut±out
portion Symbol
G, g
H, h
I, i
J, j
K, k Hole dia.
6 (0.24) nut
11 (0.43)
6 (0.24) nut
7 (0.28)
13 (0.51)
15 (0.59) Name
Front fender installation nut±front
Front spring support hole±inner
Front fender installation nut±raar
Cowl ventilator louver installation hole
Front side member standard hole
Front side member working hole Symbol
A, a
B, b
C, c
D
E, e
F, f
BODY DIMENSION DRAWINGS
ENGINE COMPARTMENT
BODY DIMENSIONSDI-3

'99camry U
213
If you perform maintenance by yourself,
be sure to follow the correct procedure
given in this part.
You should be aware that improper or in-
complete servicing may result in operating
problems.
Performing do±it±yourself maintenance
during the warranty period may affect your
warranty coverage. Read the separate
Toyota Warranty statement for details and
suggestions.
This part gives instructions only for those
items that are relatively easy for an owner
to perform. As explained in Part 6, there
are still a number of items that must be
done by a qualified technician with special
tools.
For information on tools and parts for do±
it±yourself maintenance, see ºParts and
toolsº.
Utmost care should be taken when work-
ing on your vehicle to prevent accidental
injury. Here are a few precautions that
you should be especially careful to ob-
serve:CAUTION
When the engine is running, keep
hands, clothing, and tools away
from the moving fan and engine
drive belts. (Removing rings,
watches, and ties is advisable.)
Right after driving, the engine
compartmentÐthe engine, radiator,
exhaust manifold and spark plug
boots, etc.Ðwill be hot. So be care-
ful not to touch them. Oil, fluids
and spark plugs may also be hot.
If the engine is hot, do not remove
the radiator cap or loosen the drain
plugs to prevent burning yourself.
Do not smoke, cause sparks or al-
low open flames around fuel or the
battery. Their fumes are flammable.
Be extremely cautious when work-
ing on the battery. It contains poi-
sonous and corrosive sulfuric acid.
Do not get under your vehicle with
just the body jack supporting it. Al-
ways use automotive jack stands or
other solid supports.
Do±it±yourself service
precautions

F
3: Engine Room R/B No.3Radiator Upper Support RH (See Page 18)
(TMMK Made w/ ABS and Traction Control)
(TMC Made w/ ABS, w/ ABS and Traction Control)
3: Fusible Link BlockRadiator Upper Support RH (See Page 18)
(TMMK Made w/ ABS w/o Traction Control)

POWER SOURCE
HEAD RELAY [ENGINE ROOM J/B NO.2]
2±1 : Closed with the light control SW at HEAD position or the dimmer SW at FLASH position
Closed with the engine running and the parking brake pedal released (Parking brake SW off) (w/ Daytime Running
Light)
TAILLIGHT RELAY [INSTRUMENT PANEL J/B]
5±3 : Closed with the light control SW at TAIL or HEAD position
I16 IGNITION SW
2±3 : Closed with the ignition SW at ACC or ON position
2±4 : Closed with the ignition SW at ON or ST position
7±6 : Closed with the ignition SW at ON or ST position
7±8 : Closed with the ignition SW at ST position
: PARTS LOCATION
CodeSee PageCodeSee PageCodeSee Page
F4A26 (1MZ±FE)F7D26 (1MZ±FE)G126 (1MZ±FE)F4A28 (5S±FE)F7D28 (5S±FE)G128 (5S±FE)
F5B26 (1MZ±FE)F8E26 (1MZ±FE)I1630F5B28 (5S±FE)F8E28 (5S±FE)J1131
F6C26 (1MZ±FE)F9F26 (1MZ±FE)F6C28 (5S±FE)F9F28 (5S±FE)
: RELAY BLOCKS
CodeSee PageRelay Blocks (Relay Block Location)
124Engine Room R/B No.1 (Engine Compartment Left)
224Engine Room R/B No.2 (Near the Battery)
325Engine Room R/B No.3 (Radiator Upper Support RH)
: JUNCTION BLOCK AND WIRE HARNESS CONNECTOR
CodeSee PageJunction Block and Wire Harness (Connector Location)
1A
1B20Cowl Wire and J/B Instrument Panel J/B (Lower Finish Panel)1J20Cowl Wire and J/B Instrument Panel J/B (Lower Finish Panel)
1K
2A
2B
2C22Engine Room Main Wire and Engine Room J/B No.2 (Engine Compartment Left)
2F
gg(g)
2G
2K22Cowl Wire and Engine Room J/B No 2 (Engine Compartment Left)2L22Cowl Wire and Engine Room J/B No.2 (Engine Compartment Left)
: GROUND POINTS
CodeSee PageGround Points Location
EB36 (1MZ±FE)Left Radiator Side SupportEB38 (5S±FE)Left Radiator Side Support
IG40Instrument Panel Brace LH
: SPLICE POINTS
CodeSee PageWire Harness with Splice PointsCodeSee PageWire Harness with Splice Points
E336 (1MZ±FE)Cowl WireI142Cowl WireE338 (5S±FE)Cowl Wire
SERVICE HINTS

: JUNCTION BLOCK AND WIRE HARNESS CONNECTOR
CodeSee PageJunction Block and Wire Harness (Connector Location)
1B20Cowl Wire and Instrument Panel J/B (Lower Finish Panel)1C20Cowl Wire and Instrument Panel J/B (Lower Finish Panel)
1D20Instrument Panel Wire and Instrument Panel J/B (Lower Finish Panel)
1J
1K
1M20Cowl Wire and Instrument Panel J/B (Lower Finish Panel)
1R
()
1W
2A
2C22Engine Room Main Wire and Engine Room J/B No.2 (Engine Compartment Left)
2F
gg(g)
2J
2K22Cowl Wire and Engine Room J/B No.2 (Engine Compartment Left)
2L
g(g )
: CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS
CodeSee PageJoining Wire Harness and Wire Harness (Connector Location)
EB136 (1MZ±FE)Cowl Wire and Engine Room Main Wire (Under the Engine Room J/B No.2)
EC136 (1MZ±FE)Engine Wire and Sensor Wire (Head Cover RH)
ES136 (1MZ±FE)Engine Wire and Engine Room Main Wire (Under the Engine Room J/B No.2)
ID140Floor Wire and Cowl Wire (Left Kick Panel)
IG340Instrument Panel Wire and Cowl Wire (Under the Blower Motor)
II1
II242Engine Wire and Cowl Wire (Under the Blower Motor)
II3
g()
IJ142Engine Wire and Instrument Panel Wire (Under the Blower Motor)
IK342Engine Room Main Wire and Cowl Wire (Right Kick Panel)
: GROUND POINTS
CodeSee PageGround Points Location
EB36 (1MZ±FE)Left Radiator Side Support
EC36 (1MZ±FE)Surge Tank RH
ED36 (1MZ±FE)Rear Side of the Surge Tank
IG40Instrument Panel Brace LH
IH40Instrument Panel Brace RH
BL44Under the Left Center Pillar
: SPLICE POINTS
CodeSee PageWire Harness with Splice PointsCodeSee PageWire Harness with Splice Points
I142Cowl WireI342Cowl WireI242Engine WireI542Cowl Wire

: CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS
CodeSee PageJoining Wire Harness and Wire Harness (Connector Location)
EB138 (5S±FE)Cowl Wire and Engine Room Main Wire (Under the Engine Room J/B No.2)
ID140Floor Wire and Cowl Wire (Left Kick Panel)
IG340Instrument Panel Wire and Cowl Wire (Under the Blower Motor)
II2
II342Engine Wire and Cowl Wire (Under the Blower Motor)
II4
g()
IJ142Engine Wire and Instrument Panel Wire (Under the Blower Motor)
IK142Engine Room Main Wire and Cowl Wire (Right Kick Panel)IK242Engine Room Main Wire and Cowl Wire (Right Kick Panel)
: GROUND POINTS
CodeSee PageGround Points Location
EB38 (5S±FE)Left Radiator Side Support
EC38 (5S±FE)Intake Manifold
IG40Instrument Panel Brace LH
IH40Instrument Panel Brace RH
BL44Under the Left Center Pillar
: SPLICE POINTS
CodeSee PageWire Harness with Splice PointsCodeSee PageWire Harness with Splice Points
E338 (5S±FE)Cowl WireI3
I142Cowl WireI542Cowl Wire
I242Engine WireI6
2 1
3412
1


5
121212

14












15


8 7 5

2



6












14

15


8 7 6 5

2



DARK GRAY
A13 A14DARK GRAYC7
C9 (B)
BROWN
A11 C1 C2
C10 (C)DARK GRAY
C9 (B)(TMC Made)
(TMC Made) BROWN
C10 (C)
(TMMK Made)

HEADLIGHT (w/ DAYTIME RUNNING LIGHT)
: RELAY BLOCKS
CodeSee PageRelay Blocks (Relay Block Location)
224Engine Room R/B No.2 (Near the Battery)
: JUNCTION BLOCK AND WIRE HARNESS CONNECTOR
CodeSee PageJunction Block and Wire Harness (Connector Location)
1B20Cowl Wire and Instrument Panel J/B (Lower Finish Panel)1C20Cowl Wire and Instrument Panel J/B (Lower Finish Panel)
1D20Instrument Panel Wire and Instrument Panel J/B (Lower Finish Panel)
1J
1V20Cowl Wire and Instrument Panel J/B (Lower Finish Panel)
1W
()
2B22Engine Room Main Wire and Engine Room J/B No 2 (Engine Compartment Left)2G22Engine Room Main Wire and Engine Room J/B No.2 (Engine Compartment Left)
2J22Cowl Wire and Engine Room J/B No 2 (Engine Compartment Left)2K22Cowl Wire and Engine Room J/B No.2 (Engine Compartment Left)
: CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS
CodeSee PageJoining Wire Harness and Wire Harness (Connector Location)
EB136 (1MZ±FE)Cowl Wire and Engine Room Main Wire (Under the Engine Room J/B No 2)EB138 (5S±FE)Cowl Wire and Engine Room Main Wire (Under the Engine Room J/B No.2)
IG140Instrument Panel Wire and Cowl Wire (Lower Finish Panel)IG240Instrument Panel Wire and Cowl Wire (Lower Finish Panel)
: GROUND POINTS
CodeSee PageGround Points Location
EB36 (1MZ±FE)Left Radiator Side SupportEB38 (5S±FE)Left Radiator Side Support
IF40Left Kick Panel
IG40Instrument Panel Brace LH
: SPLICE POINTS
CodeSee PageWire Harness with Splice PointsCodeSee PageWire Harness with Splice Points
E336 (1MZ±FE)Cowl WireE338 (5S±FE)Cowl Wire