abs TOYOTA CAMRY 2000 Service Manual PDF

APPENDIX ± TOYOTA T100
U.S.A.ItemArea
Body Type
Vehicle Grade
Model Code
OverallLength mm (in.)
Width mm (in.)
Height* mm (in.)
Wheel Base mm (in.)
TreadFront mm (in.)
Rear mm (in.)
Effective Head RoomFront mm (in.)
Rear mm (in.)
Front mm (in.)
Rear mm (in.)
Front mm (in.)
Rear mm (in.)
Front mm (in.)
Rear mm (in.) Effective Leg Room
Shoulder Room
Overhang
Min. Running Ground Clearance mm (in.)
Angle of Approach degrees
Angle of Departure degrees
Curb Weight
Gross Vehicle WeightFront kg (lb)
Rear kg (lb)
Total kg (lb)
Front kg (lb)
Rear kg (lb)
Total kg (lb)
Fuel Tank Capacity (US.gal, Imp.gal)
Luggage Compartment Capacity m
3 (cu.ft.)
Max. Speed km / h (mph)
Max. Cruising Speed km / h (mph)
Max. Permissible
Speed
Turning Diameter
(Outside Front)1st Gear km / h (mph)
2nd Gear km / h (mph)
3rd Gear km / h (mph)
4th Gear km / h (mph)
Wall to Wall m (ft.)
Curb to Curb m (ft.)
Engine Type
Valve Mechanism
Bore x Stroke mm (in.)
Displacement cm
3 (cu.in.)
Compression Ratio
Carburetor Type
Research Octane No. RON
Max. Output (SAE-NET) kW / rpm (HP@rpm)
Max. Torque (SAE-NET) N
.m / rpm (lb-ft@rpm)
Battery Capacity (5HR) Voltage & Amp. hr.
Generator Output Watts
Starter Output kW
Clutch Type
Transmission Type
Transmission Gear
Ratio
Transfer Gear Ratio H4 / L4
Differential Gear Ratio (Front / Rear)
Brake Type
Parking Brake Type
Brake Booster Type and Size in.
Proportioning Valve Type
Suspension Type
Stabilizer Bar
Steering Gear Type
Steering Gear Ratio (Overall)
Power Steering TypeIn First
In Second
In Third
In Fourth
In Fifth
In Reverse
Front
Rear
Front
Rear
Front
Rear
Major Dimensions & Vehicle Weights Performance Engine Engine
Chassis
Electrical
Xtra Cab
Length mm (in.)
Width mm (in.)
Height mm (in.)SR5
Cargo Space
Differential Gear Size (Front / Rear) in.
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75 DLX
167
VCK11L-CRMSKA VCK11L-CRSSKA VCK21L-CRMDKA VCK21L-CRSDKA
5310 (209.1)



1910 (75.2)



1740 (68.6)
1840 (72.6), 1870 (73.5)*
2

3095 (121.9)



1570 (61.8)
1605 (63.2), 1635 (64.4)*
2

1625 (64.0)
1615 (63.6), 1650 (65.0)*2

1007 (40.0)



960 (37.8)



1089 (42.9)



753 (29.6)



1585 (62.4)



1528 (60.2)



ÐÐÐÐ
ÐÐÐÐ
ÐÐÐÐ
820 (32.3)



1395 (54.9)



195 (7.7)
210 (8.3), 235 (9.3)*
2

26
34, 36*2

20
22, 23*2

905 (1995) 912 (2010) 1052 (2320) 1075 (2370)
728 (1605) 735 (1620) 764 (1685) 773 (1705)
1633 (3600) 1647 (3630) 1816 (4005) 1848 (4075)
ÐÐÐÐ
ÐÐÐÐ
2585 (5700)
2722 (6000)

91 (24.0, 20.0)



ÐÐÐÐ
165 (103)



150 (93)



40 (25) 55 (34) 40 (25) 55 (34)
75 (47) 100 (62) 75 (47) 100 (62)
115 (71) 150 (93) 115 (71) 150 (93)
165 (103) 165 (103) 165 (103) 165 (103)
12.2 (40.0)
13.8 (45.3)

11.5 (37.7)
13.2 (43.3)

5VZ-FE



24-Valve, DOHC



93.5 x 82.0 (3.68 x 3.23)



3378 (206.1)



9.6 : 1



SFI



91



142 / 4800 (190 @ 4800)



298 / 3600 (220 @ 3600)



12 ± 55



840



1.2, 1.4*
31.4, 1.8*31.4 1.4, 1.8*3
Dry, Single Plate Ð Dry, Single Plate Ð
R150 A340E R150F A340F
3.830 2.804 3.830 2.804
2.062 1.531 2.062 1.531
1.436 1.000 1.436 1.000
1.000 0.705 1.000 0.705
0.838 Ð 0.838 Ð
4.220 2.393 4.220 2.393
Ð Ð 1.000 / 2.566

± / 3.916
3.909 / 3.909, 4.100 / 4.100*
24.100 / 4.100, 4.300 / 4.300*2
±/8
7.5 / 8

Ventilated Disc



L.T. Drum



L.T. Drum



Tandem 8º + 9º, 9º + 10º*
4



LSP & BV



Double Wishbone



Leaf Spring



STD



ÐÐÐÐ
Rack & Pinion
Recirculating Ball

20.3
19.0

Integral Type



*: Unladen Vehicle *
3: Set Option with Cold Area Specs.
*1: For P235 / 75R Tire with Steel Wheel (Option) *4: With ABS
*2: For 265 / 70R16 Tire (Option)

APPENDIX ± TOYOTA T100
CanadaItemArea
Body Type
Vehicle Grade
Model Code
OverallLength mm (in.)
Width mm (in.)
Height* mm (in.)
Wheel Base mm (in.)
TreadFront mm (in.)
Rear mm (in.)
Effective Head RoomFront mm (in.)
Rear mm (in.)
Front mm (in.)
Rear mm (in.)
Front mm (in.)
Rear mm (in.)
Front mm (in.)
Rear mm (in.) Effective Leg Room
Shoulder Room
Overhang
Min. Running Ground Clearance mm (in.)
Angle of Approach degrees
Angle of Departure degrees
Curb Weight
Gross Vehicle WeightFront kg (lb)
Rear kg (lb)
Total kg (lb)
Front kg (lb)
Rear kg (lb)
Total kg (lb)
Fuel Tank Capacity (US.gal, Imp.gal)
Luggage Compartment Capacity m
3 (cu.ft.)
Max. Speed km / h (mph)
Max. Cruising Speed km / h (mph)
Max. Permissible
Speed
Turning Diameter
(Outside Front)1st Gear km / h (mph)
2nd Gear km / h (mph)
3rd Gear km / h (mph)
4th Gear km / h (mph)
Wall to Wall m (ft.)
Curb to Curb m (ft.)
Engine Type
Valve Mechanism
Bore x Stroke mm (in.)
Displacement cm
3 (cu.in.)
Compression Ratio
Carburetor Type
Research Octane No. RON
Max. Output (SAE-NET) kW / rpm (HP@rpm)
Max. Torque (SAE-NET) N
.m / rpm (lb-ft@rpm)
Battery Capacity (5HR) Voltage & Amp. hr.
Generator Output Watts
Starter Output kW
Clutch Type
Transmission Type
Transmission Gear
Ratio
Transfer Gear Ratio H4 / L4
Differential Gear Ratio (Front / Rear)
Brake Type
Parking Brake Type
Brake Booster Type and Size in.
Proportioning Valve Type
Suspension Type
Stabilizer Bar
Steering Gear Type
Steering Gear Ratio (Overall)
Power Steering TypeIn First
In Second
In Third
In Fourth
In Fifth
In Reverse
Front
Rear
Front
Rear
Front
Rear
Major Dimensions & Vehicle Weights Performance Engine Engine
Chassis
Electrical
Xtra Cab
Length mm (in.)
Width mm (in.)
Height mm (in.)DLX
Cargo Space
Differential Gear Size (Front / Rear) in.
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75 SR5
169
VCK11L-CRMDKK VCK11L-CRSDKK VCK21L-CRMSKK VCK21L-CRSSKK
5310 (209.1)



1910 (75.2)



1730 (68.2), 1740 (68.6)*
1
1840 (72.6), 1870 (73.5)*2

3095 (121.9)



1565 (61.6), 1570 (61.8)*
1
1605 (63.2), 1635 (64.4)*2

1615 (63.6), 1625 (64.0)*1
1615 (63.6), 1650 (65.0)*2

1007 (40.0)



960 (37.8)



1089 (42.9)



753 (29.6)



1585 (62.4)



1528 (60.2)



ÐÐÐÐ
ÐÐÐÐ
ÐÐÐÐ
820 (32.3)



1395 (54.9)



185 (7.3), 195 (7.7)*
1
210 (8.3), 235 (9.3)*2

26
34, 36*2

20
22, 23*2

891 (1965) 898 (1980) 1066 (2350) 1089 (2400)
719 (1585) 726 (1600) 767 (1690) 776 (1710)
1610 (3550) 1624 (3580) 1833 (4040) 1865 (4110)
ÐÐÐÐ
ÐÐÐÐ
2585 (5700)
2722 (6000)

91 (24.0, 20.0)



ÐÐÐÐ
165 (103)



150 (93)



40 (25) 55 (34) 40 (25) 55 (34)
75 (47) 100 (62) 75 (47) 100 (62)
115 (71) 150 (93) 115 (71) 150 (93)
165 (103) 165 (103) 165 (103) 165 (103)
12.2 (40.0)
13.8 (45.3)

11.5 (37.7)
13.2 (43.3)

5VZ-FE



24-Valve, DOHC



93.5 x 82.0 (3.68 x 3.23)



3378 (206.1)



9.6 : 1



SFI



91



142 / 4800 (190 @ 4800)



298 / 3600 (220 @ 3600)



12 ± 55



840



1.4 1.8 1.4 1.8
Dry, Single Plate Ð Dry, Single Plate Ð
R150 A340E R150F A340F
3.830 2.804 3.830 2.804
2.062 1.531 2.062 1.531
1.436 1.000 1.436 1.000
1.000 0.705 1.000 0.705
0.838 Ð 0.838 Ð
4.220 2.393 4.220 2.393
Ð Ð 1.000 / 2.566

± / 3.769, 3.916*
1
3.909 / 3.909, 4.100 / 4.100*24.100 / 4.100, 4.300 / 4.300*2
±/8
7.5 / 8

Ventilated Disc



L.T. Drum



L.T. Drum



Tandem 8º + 9º, 9º + 10º*
4



LSP & BV



Double Wishbone



Leaf Spring



STD



ÐÐÐÐ
Rack & Pinion
Recirculating Ball

20.3
19.0

Integral Type



*: Unladen Vehicle *
3: Set Option with Cold Area Specs.
*1: For P235 / 75R Tire with Steel Wheel (Option) *4: With ABS
*2: For 265 / 70R16 Tire (Option)

'99camry U
43
A crash severe enough to inflate the air-
bags may break the windshield as the
vehicle buckles. In vehicles with a pas-
senger airbag the windshield may also be
damaged by absorbing some of the force
of the inflating airbag.CAUTION

The SRS airbag system is designed
only as a supplement to the prima-
ry protection of the driver side and
front passenger side seat belt sys-
tems. The front seat occupants can
be killed or seriously injured by an
inflating airbag if they do not wear
the available seat belts. During sud-
den braking just before a collision,
an unrestrained driver or front pas-
senger can move forward into direct
contact with or close proximity to
the airbag which may then deploy
during the collision. To obtain maxi-
mum protection in an accident, the
driver and all passengers in the ve-
hicle must wear their seat belts.
Wearing a seat belt during an acci-
dent reduces the chances of death
or serious injuries or being thrown
out of the vehicle. For instructions
and precautions concerning the seat
belt system, see ºSeat beltsº in this
chapter.

Improperly seated and/or restrained
infants and children can be killed
or seriously injured by a deploying
airbag. An infant or child who is
too small to use a seat belt should
be properly secured using a child
restraint system. Toyota strongly
recommends that all infants and
children be placed in the rear seat
of the vehicle and properly re-
strained. The rear seat is the safest
for infants and children. For in-
structions concerning the installa-
tion of a child restraint system, see
ºChild restraintº in this chapter.

'99camry U
56
ÐBuilt±in child restraint
The built±in child restraint system mainly
consists of a child seat integrated in the
rear seat and 5±point seat belts. Refer to
the illustration to become familiar with the
parts of the system. This child restraint
system conforms to U.S. Motor Vehicle
Safety Standard No.213 and Canada Motor
Vehicle Safety Standard No.213.4.
1. Shoulder belts
2. Head restraint lock release button
3. Storage bag (for the head restraint and
upper pad)
4. Head restraint and upper pad
(for the rear seat)
5. Maximum shoulder height indicator
label
6. Removable pad
7. Seat belt buckle
8. Seat belt release strap (black)
9. Seat belt adjustment strap (gray tab)
10. Child seat cushion
11. Seat belt buckle release button
12. Seat belt tabs
13. Owner 's manual supplement
14. Shoulder belt clip

'99camry U
60
7. Sit the child on the child seat. Place
a shoulder belt over each shoulder.
Insert the tabs into the buckle.
CAUTION

When the built±in child restraint is
in use, do not use the adult lap and
shoulder belt instead of the built±in
child restraint seat belt as it can
cause severe injury to the child in
a sudden stop or crash.

After inserting the tabs, make sure
the tabs and buckle are locked and
that the shoulder belts and buckle
strap are not twisted.

Do not insert coins, clips, etc. in
the buckle as this may prevent you
from properly latching the tabs and
buckle.

If the seat belt does not function
normally, it cannot protect your
child from injury. Contact your Toy-
ota dealer immediately. Do not use
the built±in child restraint until the
seat belt is fixed.
8. Fasten the shoulder belt clip.
The purpose of the clip is to keep the
shoulder belts positioned correctly on the
shoulders.
CAUTION
An unfastened shoulder belt clip will
not help keep the belts on the child's
shoulders. In a sudden stop or crash,
the child may go too far forward and
be seriously injured. Make sure the
belt clip is fastened at all times.

'99camry U
90
(g) ºABSº Warning Light
This light warns that there is a problem
somewhere in your anti±lock brake sys-
tem.
If the light comes on while you are driv-
ing, have your vehicle checked by your
Toyota dealer as soon as possible.
The light will come on when the ignition
key is turned to the ºONº position. After
a few seconds, the light will go off.
When the ºABSº warning light is on (and
the brake system warning light is off), the
brake system operates conventionally but
anti±lock brake system is not assisting
brake performance so that the wheels can
lock±up during sudden braking or braking
on slippery road surfaces.
(h) Open Door Warning Light
This light remains on until all the doors
and back door are completely closed.
(i) Rear Light Failure Warning Light
If this light comes on when the headlight
switch is turned on (at the first or second
clickstop), it indicates that one or more of
the tail lights are burned out.If it comes on when the brake pedal is
depressed, one or more stop lights are
burned out.
Have defective bulbs replaced as soon as
possible.
(j) SRS Airbag Warning Light
This light will come on when the igni-
tion key is turned to the ºACCº or
ºONº position. After about 6 seconds,
the light will go off. This means the
systems of the airbag and front seat
belt pretensioner are operating properly.
The warning light system monitors the
front airbag sensors, airbag sensor as-
sembly, seat belt pretensioner assemblies,
inflators, warning light, interconnecting wir-
ing and power sources.
If either of the following conditions occurs,
this indicates a malfunction somewhere in
the parts monitored by the warning light
system. Contact your Toyota dealer as
soon as possible to service the vehicle.

The light does not come on when the
ignition key is turned to the ºACCº or
ºONº position or remains on.

The light comes on or flashes while
driving.(k) Low Windshield Washer Fluid Level
Warning Light
The light warns that the windshield washer
fluid level is too low. Add washer fluid at
your earliest opportunity. (For instructions,
see ºAdding washer fluidº in Chapter 7±3.)
(l) ºTRAC OFFº Indicator/Warning Light
This light comes on when the ignition key
is turned to ºONº, and will go off after 3
seconds. This means that the system is
operating properly.
If one of the following conditions occurs,
this indicates a malfunction somewhere in
the parts monitored by the warning light
system. Contact your Toyota dealer as
soon as possible to service the vehicle.

The light remains on more than 3 se-
conds after the ignition switch is turned
on.

The light comes on while driving even
if the ºTRAC OFFº switch is not
pushed.

The light flashes.

'99camry U
91
(m) Key Reminder Buzzer
This buzzer reminds you to remove the
key when you open the driver 's door with
the ignition key in the ºACCº or ºLOCKº
position.
CHECKING SERVICE REMINDER INDICA-
TORS (except the low fuel level warning
light and low windshield washer fluid
level warning light)
1. Apply the parking brake.
2. Open one of the doors.
The open door warning light should
come on.
3. Close the door.
The open door warning light should go
off.
4. Turn the ignition key to ºACCº.
The SRS airbag warning light should
come on. It goes off after about 6 se-
conds.
5. Turn the ignition key to ºONº, but do
not start the engine.
All the service reminder indicators ex-
cept the open door warning light, SRS
airbag warning light and low windshield
washer fluid level warning light should
come on. The ºABSº warning light goes
off after a few seconds.If any service reminder indicator or warn-
ing buzzer does not function as described
above, either the bulb is burned out or the
circuit is in need of repair. Have it
checked by your Toyota dealer as soon as
possible.

'99camry U
220
Checking brake fluid
To check the fluid level, simply look at
the see±through reservoir. The level
should be between the ºMAXº and
ºMINº lines on the reservoir.
It is normal for the brake fluid level to go
down slightly as the brake pads wear. So
be sure to keep the reservoir filled.
If the reservoir needs frequent refilling, it
may indicate a serious mechanical prob-
lem.
If the level is low, add SAE J1703 or
FMVSS No.116 DOT 3 brake fluid to the
brake reservoir.
Remove and replace the reservoir cover
by hand.Use only newly opened brake fluid. Once
opened, brake fluid absorbs moisture from
the air, and excess moisture can cause a
dangerous loss of braking.
CAUTION
Take care when filling the reservoir
because brake fluid can harm your
eyes and damage painted surfaces. If
fluid gets in your eyes, flush your
eyes with clean water.
NOTICE
If you spill some of the fluid, be sure
to wash it off with water to prevent
it from damaging the parts or paint.
Checking power steering fluid
CloseOpen
If hot
O.K.If cold
O.K.
If hot
addIf cold
add
Check the fluid level through the reser-
voir. If necessary, add automatic trans-
mission fluid DEXRONII or III.
If the vehicle has been driven around 80
km/h (50 mph) for 20 minutes (a little
more in frigid temperatures), the fluid is
hot (60CÐ80C or 140FÐ175F). You
may also check the level when the fluid
is cold (about room temperature,
10CÐ30C or 50FÐ85F) if the engine
has not been run for about five hours.

'99camry U
232
ÐHeadlights
1. Open the hood. Unplug the connec-
tor. Remove the rubber cover.
If the connector is tight, wiggle it.2. Release the bulb retaining spring
and remove the bulb. Install a new
bulb and the bulb retaining spring.
To install a bulb, align the tabs of the
bulb with the cutouts of the mounting
hole.3. Install the rubber cover with the
ºTOPº mark upward, and snuggle on
the boss. Insert the connector. Then
install the plastic cover.
Make sure the rubber cover fits snugly on
the connector and the headlight body.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.

'99camry U
163
Your engine is fitted with twin ground
electrode platinum±tipped spark plugs.
NOTICE
Use only twin ground electrode plati-
num±tipped spark plugs for your en-
gine performance.
Brake system
TANDEM MASTER CYLINDER BRAKE
SYSTEM
The tandem master cylinder brake system
is a hydraulic system with two separate
sub±systems. If either sub±system should
fail, the other will still work. However, the
pedal will be harder to press, and your
stopping distance will be longer. Also, the
brake system warning light may come on.
CAUTION
Do not drive your vehicle with only a
single brake system. Have your
brakes fixed immediately.
BRAKE BOOSTER
The brake booster uses engine vacuum to
power±assist the brakes. If the engine
should quit while you are driving, you can
bring the vehicle to a stop with normal
pedal pressure. There is enough reserve
vacuum for one or two stopsÐbut no
more!
CAUTION

Do not pump the brake pedal if the
engine stalls. Each push on the
pedal uses up your vacuum reserve.

Even if the power assist is com-
pletely lost, the brakes will still
work. But you will have to push the
pedal hardÐmuch harder than nor-
mal. And your braking distance will
be longer.
ANTI±LOCK BRAKE SYSTEM (with
ºABSº warning light)
The anti±lock brake system is designed to
automatically help prevent lock±up of the
wheels during sudden braking or braking
on slippery road surfaces. This assists in
providing directional stability and steering
performance of the vehicle under these
circumstances.
The anti±lock brake system becomes op-
erative after the vehicle has accelerated
to a speed in excess of approximately 10
km/h (6 mph). It stops operating when the
vehicle decelerate to a speed below
approximately 5 km/h (3 mph).
Twin ground electrode
platinum±tipped spark plugs