light TOYOTA CAMRY 2000 Service Repair Manual

9
8
7
6
5
4
3
2
1
GENERAL 2000 FEATURES
DESCRIPTION 2. . . . . . . . . . . . . . . . . . . . . . . . . . .
ENGINE
Evaporative Emission Control System3 . . . . . . . .
AUTOMATIC TRANSMISSION
Overdrive switch4 . . . . . . . . . . . . . . . . . . . . . . . . .
COROLLA
OUTLINE OF NEW FEATURES 6. . . . . . . . . . . .
MODEL CODE 7. . . . . . . . . . . . . . . . . . . . . . . . . .
MODEL LINE-UP 7. . . . . . . . . . . . . . . . . . . . . . . .
NEW FEATURES
1ZZ-FE Engine
Description8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Major Difference9 . . . . . . . . . . . . . . . . . . . . . . .
Valve Mechanism10 . . . . . . . . . . . . . . . . . . . . . . .
Ignition System11 . . . . . . . . . . . . . . . . . . . . . . . .
Engine Control System12 . . . . . . . . . . . . . . . . . . .
Brakes
General20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System Diagram20 . . . . . . . . . . . . . . . . . . . . . . . .
Hydraulic Circuit20 . . . . . . . . . . . . . . . . . . . . . . .
Operation21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CAMRY
OUTLINE OF NEW FEATURES 26. . . . . . . . . . . .
MODEL CODE 29. . . . . . . . . . . . . . . . . . . . . . . . . . .
MODEL LINE-UP 30. . . . . . . . . . . . . . . . . . . . . . . . .
NEW FEATURES
Exterior31 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Interior32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5S-FE Engine
Description33 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Major Difference34 . . . . . . . . . . . . . . . . . . . . . . .
Intake and Exhaust System34 . . . . . . . . . . . . . . .
Fuel System35 . . . . . . . . . . . . . . . . . . . . . . . . . . .
5S-FNE Engine
Description36 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Features of 5S-FNE Engine38 . . . . . . . . . . . . . . .
Engine Proper39 . . . . . . . . . . . . . . . . . . . . . . . . . .
Valve Mechanism40 . . . . . . . . . . . . . . . . . . . . . . .
Intake and Exhaust System41 . . . . . . . . . . . . . . .
Fuel System43 . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ignition System48 . . . . . . . . . . . . . . . . . . . . . . . .
Engine Control System49 . . . . . . . . . . . . . . . . . . .
1MZ-FE Engine54 . . . . . . . . . . . . . . . . . . . . . . . . .
Automatic Transaxle54 . . . . . . . . . . . . . . . . . . . . . .
Brakes55 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Steering56 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Body57 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lighting58 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Air Conditioning59 . . . . . . . . . . . . . . . . . . . . . . . . .
SRS Airbag59 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CAMRY SOLARA
OUTLINE OF NEW FEATURES 62. . . . . . . . . . . .
MODEL CODE 64. . . . . . . . . . . . . . . . . . . . . . . . . . .
MODEL LINE-UP 64. . . . . . . . . . . . . . . . . . . . . . . . .
SIENNA
OUTLINE OF NEW FEATURES 66. . . . . . . . . . . .
MODEL CODE 67. . . . . . . . . . . . . . . . . . . . . . . . . . .
MODEL LINE-UP 67. . . . . . . . . . . . . . . . . . . . . . . . .
RAV4
OUTLINE OF NEW FEATURES 70. . . . . . . . . . . .
MODEL CODE 71. . . . . . . . . . . . . . . . . . . . . . . . . . .
MODEL LINE-UP 71. . . . . . . . . . . . . . . . . . . . . . . . .
TOYOTA TACOMA
OUTLINE OF NEW FEATURES 74. . . . . . . . . . . .
MODEL CODE 76. . . . . . . . . . . . . . . . . . . . . . . . . . .
MODEL LINE-UP 77. . . . . . . . . . . . . . . . . . . . . . . . .
NEW FEATURES
2RZ-FE and 3RZ-FE Engine
Description78 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LEV Compliance78 . . . . . . . . . . . . . . . . . . . . . . .
Differential82 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4RUNNER
OUTLINE OF NEW FEATURES 84. . . . . . . . . . . .
MODEL CODE 86. . . . . . . . . . . . . . . . . . . . . . . . . . .
MODEL LINE-UP 86. . . . . . . . . . . . . . . . . . . . . . . . .
LAND CRUISER
OUTLINE OF NEW FEATURES 88. . . . . . . . . . . .
MODEL CODE 90. . . . . . . . . . . . . . . . . . . . . . . . . . .
MODEL LINE-UP 90. . . . . . . . . . . . . . . . . . . . . . . . .
NEW FEATURES
Engine91 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Differential91 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Brakes
General92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Function92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System Diagram93 . . . . . . . . . . . . . . . . . . . . . . . .
Layout of Components94 . . . . . . . . . . . . . . . . . . .
2
TABLE OF CONTENTS

CAMRY
CAMRY ± OUTLINE OF NEW FEATURES 26
OUTLINE OF NEW FEATURES
The CAMRY is a high-quality family sedan with advanced technology and sporty performance. The following
changes are made for the 2000 model year.
1. Model Line-Up
The 5S-FNE CNG (Compressed Natural Gas) engine model has been added.
2. Exterior
Four new exterior colors have been added, for a total of 10 colors.
The design of the front and rear bumpers has been changed.
The bumper and the radiator grille have been made separate, and the radiator grille is chrome-plated.
The side protection molding has been increased in size. On the XLE grade model, chrome stripes have been
adopted for the side protection molding.
The 4-light multi-reflector type headlights are adopted with new styling.
The design and styling of the rear combination light has been changed.
The 16º aluminum alloy wheel and wheel cap has been added.
The styling of the 15º full wheel cover has been changed.
3. Interior
Wood-grain panels have been adopted in the interior of the XLE grade model.
CRS tether anchor brackets have been provided on the package tray trim. (except 5S-FNE engine Model)
A clock with an outside temperature gauge has been provided on the models with manual air conditioning.
4. 5S-FE Engine
The intake system from the inlet duct to the throttle body has been improved to increase torque and reduce
noise.
The direction of the rotation of the radiator cooling fan has been reversed.
A 2-way exhaust control system has been adopted on the TMMK made model.
Along with the discontinuance of the air assist system, the fuel injectors and the IAC valve have been
changed for the California specification model, in order to meet ULEV (Ultra-Low Emission Vehicle) re-
quirement.
The system for detecting evaporative emission leaks has been changed. For details, see the General 2000
Features section.
5. 5S-FNE Engine
Based on the 5S-FE gasoline engine, the 5S-FNE engine uses compressed natural gas. The fuel lines have
been designed exclusively for compressed natural gas application.
6. 1MZ-FE Engine
The system for detecting evaporative emission leaks has been changed. For details, see the General 2000
Features section.
A diagnostic trouble code (DTC) has been added for indicating a thermostat malfunction.
7. Automatic Transaxle
The overdrive switch has been changed to the momentary type. For details, see the General 2000 Features
section.
The differential gear ratio of the A140E automatic transaxle has been changed for the 5S-FNE engine mod-
el to accommodate the performance of the 5S-FNE engine.

3
CAMRY ± OUTLINE OF NEW FEATURES27
8. Brakes
The specifications of the front and rear brakes have been changed.
9. Suspension
The front and rear springs, stabilizers, and shock absorbers have been modified to realize excellent stability,
controllability, and riding comfort.
10. Steering
A check valve has been added to the power steering gear box to help reduce kickback.
The rack stroke of the 5S-FE engine model has been changed to 145mm (5.71 in.), which is the same as
in the 1MZ-FE engine.
11. Body
Hood support dampers are used.
Two utility hooks added in the luggage room for the gasoline engine model.
To install the fuel tank in the front area of the luggage compartment, the upper back panel has been cut
out for the 5S-FNE engine model.
A performance rod that joins the tops of the right and left rear suspension strut towers has been adopted
for the 5S-FNE engine model.
The shape of the rear floor pan has been changed to prevent the luggage compartment capacity from being
reduced as a result of the installation of the fuel tank in the luggage compartment for the 5S-FNE engine
model.
12. Seat
The seat cover of the LE grade model has been changed.
Optional driver power seat added for the LE grade model.
A fixed type seat back is used for the rear seat for the 5S-FNE engine model.
13. Seat Belt
2-point NR (Non-Retractor) seat belt is used for the rear center seat for the 5S-FNE engine model.
14. Wireless Door Lock Control
Audio answer back is adopted.
15. Lighting
Along with the adoption of the 4-beam headlights, the electrical circuit of the daytime running light system
has been changed.
16. Air Conditioning
The air inlet mode selector of heater control panel has been changed from the lever type to the push button
type on the CE and LE grade model.
When the air outlet mode is set to the DEF or FOOT / DEF mode, the air inlet mode also changes to the
FRESH mode, has been also added on the CE and LE grade model.
A fully automatic controlled type air conditioning is used on the XLE grade model.
A defroster-linked air conditioning start up control has been continuing to use since the previous models
with air conditioning.
17. SRS Airbag
The inflator of the SRS airbag for the driver has been made more compact and lightweight.
A signal that causes the supply of fuel to be cut off during a frontal collision is output by the airbag sensor
assembly to the ECM for the 5S-FNE engine model.

3
CAMRY ± NEW FEATURES
172CM02
A
A
172CM03
Chrome
Plating
Radiator
Grille
Chrome
Plating
BumperIntegrated Bumper and
Radiator Grille
New Previous EmblemEmblem
172CM04
Chrome Strip
XLE Grade LE and CE Grade
New Previous31
NEW FEATURES
EXTERIOR
The design of the front and rear bumpers has been changed.
The bumper and the radiator grille have been made separate, and the radiator grille is chrome-plated.
The side protection molding has been increased in size. On the XLE grade model, chrome stripes have been
adopted for the side protection molding.
The 4-light multi-reflector type headlights are adopted with new styling.
The design and styling of the rear combination light has been changed.

Bumper and Radiator Grille (A ± A) Cross Section 


Side Protection Moulding Cross Section 

CAMRY ± NEW FEATURES
No.4 INJECTOR
SPARK PLUGSIGNITERS and
IGNITION COILS
No.2 INJECTOR
No.1 INJECTOR
No.3 INJECTOR
SENSORS ACTUATORS
MANIFOLD ABSOLUTE
PRESSURE SENSORSFI PIM#10+
CRANKSHAFT POSITION
SENSORNE
CAMSHAFT POSITION
SENSORG
ENGINE COOLANT TEMP.
SENSORTHW
INTAKE AIR TEMP. SENSORTHA
THROTTLE POSITION SENSORVTA
COMBINATION METER
SPD
Vehicle Speed Signal
AIR FUEL RATIO SENSOR
(Bank 1, Sensor 1)AF
HEATED OXYGEN SENSOR
(Bank 1, Sensor 2)OX2
POWER STEERING OIL
PRESSER SWITCHPSW
TAILLIGHT & REAR WINDOW
DEFOGGER SYSTEMELS
IGNITION SWITCHSTA
PARK / NEUTRAL POSITION
SWITCHNSW
STOP LIGHT SWITCHSTP
AIRBAG SENSOR ASSEMBLY
F/PS
Fuel Cut-Off Signal
#10
#20+
#20
#30+
#30
#40+
#40
ESA
IGT1,
IGT2
IGF
CONTROL VALVEIACRSD
VSV EGREGR
AIR FUEL RATIO SENSOR
HEATER AIR FUEL RATIO SENSOR
HEATER CONTROLHTAF
HEATED OXYGEN SENSOR
HEATER OXYGEN SENSOR HEATER
CONTROLHT2
MAGNET CLUTCH RERAYAIRE CONDITIONING
CUT-OFF CONTROLMGC
FUEL GAGE
LOW FUEL LEVEL WARNING
LIGHT
ECM
AIR CONDITIONING SWITCHA/C SW
R, 2, L
FUEL
FUEL W
50
Construction
The configuration of the engine control system in the 5S-FNE engine is as shown in the following chart.
(Continued)

3
CAMRY ± NEW FEATURES
172CM18
172CM19
ON
OFF1 sec 1 sec
1 sec 1 sec
ON
OFF1 sec 1 sec
2 sec 2 sec 2 sec53
Injector Control
1) General
Fuel clearing control and injector unsticking control have been added to the injector control.
2) Fuel Clearing Control
While the vehicle is being driven at speeds higher than 60 km / h (37.5 mph), and the ignition switch is
turned OFF after the ECM has detected a low temperature condition of less than 25C (77F) of intake
air temperature, the ECM closes the fuel shutoff valve for the delivery pipe. However, instead of immedi-
ately stopping the engine, the fuel clearing control allows the engine to stop on its own after the fuel in
the delivery pipe has been used up. If the engine is running even after 2 seconds or more have elapsed
after the ignition switch has been turned OFF, the EFI relay is turned OFF to stop the engine.
3) Injector Unsticking Control
When the ignition switch is turned ON after executing the fuel clearing control, the injector unsticking
control activates two cylinders at a time to unstick the valve that is frozen stuck onto the valve seat. At
low temperature conditions. At this time, the shutoff valve remains closed so that the injectors will not
inject fuel.
Gas Leak Judgment
If the ECM has detected a gas leak through the signals received from the pressure sensors, the ECM closes
the shutoff valves and flashes the low fuel level warning light.
These functions are canceled by resetting the ECM (by disconnecting the negative [-] terminal of the bat-
tery), which enables the engine to start.
(The ECM should be reset only after performing a gas leak check and making sure that the leak has been
eliminated.)
NOTE: The low fuel level warning light also flashes when the fuel level is extremely low. The flashing
patterns shown below differentiates a gas leak from a low fuel level.
Flashing Pattern
Gas Leak
Fuel Low Level

CAMRY ± NEW FEATURES
172CM08
Hood Support Dampers
Utility Hooks
172CM09
High
High Beam
Indicator Light
Low
HighLow
Daytime
Running
Light
Relay No.3
Daytime Running Light
Relay No.4
'00 Model
HighLowHighLow
Daytime Running
Light Relay No.4Daytime Running
Light Resistor
'99 Model 58
Hood support dampers are used.
Two utility hooks added in the luggage room.
LIGHTING
The 4-light multi-reflector type headlights are adopted with new styling.
Along with the adoption of the 4-beam headlights, the daytime running light system has been changed
from the '99 model type that uses resistors to dim the low beams. On the 2000 model, the daytime running
light is a type that dims the right and left high beams through a series circuit.

GENERAL 2000 FEATURES
172GN01
172GN02New
Previous ECMODLP
ODMSO / D OFF
Indicator
Light
O / D Switch
(Momentry
Type)O / D OFF
Indicator
LightON
OFF
O/D
SwitchON
OFF
Ignition
SwitchON
OFF
ECM
OD2O / D OFF
Indicator
Light
O / D Switch
(Lock Type)O / D OFF
Indicator
LightON
OFF
O/D
Switch
ConditionON
OFF
Real
Switch
ConditionON
OFF
Ignition
SwitchON
OFF 2
AUTOMATIC TRANSMISSION

OVERDRIVE SWITCH
The overdrive switch has been changed from the previous ON / OFF lock type to the momentary type switch.
Pressing the momentary switch closes (turns ON) the contact points, and releasing the switch opens (turns
OFF) the contact points. Accordingly, pressing the switch causes the signal to be input into the ECM.
Pressing the switch in overdrive turns OFF the overdrive. Pressing it again turns the overdrive back ON.
When the overdrive is OFF, turning the ignition switch from OFF to ON turns the overdrive back ON.

The 5S±FE engine is an in±line, 4±cylinder engine with the cylinders numbered 1±2±3±4
from the front. The crankshaft is supported by five bearings inside the crankcase. These bearings
are made of aluminum alloy.
The crankshaft is integrated with eight weights for balance. Oil holes are placed in the center of
the crankshaft to supply oil to the connecting rods, bearing, pistons and other components.
The firing order is 1±3±4±2. The cylinder head is made of aluminum alloy, with a cross flow
type intake and exhaust layout and with pent±roof type combustion chambers. The spark plugs
are located in the center of the combustion chambers.
The intake manifold has four independent long ports and utilizes the inertial supercharging effect
to improve engine torque at low and medium speeds.
Exhaust and intake valves are equipped with irregular pitch springs made of special valve spring
carbon steel which are capable of functioning no matter what the engine speed.
The intake camshaft is driven by a timing belt, and a gear on the intake camshaft engages with
a gear on the exhaust camshaft to drive it. The cam journal is supported at five places between
the valve lifters of each cylinder and on the front end of the cylinder head. Lubrication of the cam
journals and gears is accomplished by oil being supplied through the oiler port in the center of the
camshaft.
Adjustment of the valve clearance is done by means of an outer shim type system, in which valve
adjusting shims are located above the valve lifters. This permits replacement of the shims without
removal of the camshafts.
Pistons are made of high temperature±resistant aluminum alloy, and a depression is built into
the piston head to prevent interference with the valves.
Piston pins are the full±floating type, with the pins fastened to neither the piston boss nor the
connecting rods. Instead, snap rings are fitted on both ends of the pins, preventing the pins from
falling out.
The No.1 compression ring is made of steel and the No.2 compression ring is made of cast iron.
The oil ring is made of a combination of steel and stainless steel. The outer diameter of each
piston ring is slightly larger than the diameter of the piston and the flexibility of the rings allows
them to hug the cylinder walls when they are mounted on the piston. Compression rings No.1 and
No.2 work to prevent gas leakage from the cylinder and the oil ring works to scrape oil off the
cylinder walls to prevent it from entering the combustion chambers.
The cylinder block is made of cast iron. It has four cylinders which are approximately twice the
length of the piston stroke. The top of each cylinder is closed off by the cylinder head and the
lower end of the cylinders becomes the crankcase, in which the crankshaft is installed. In
addition, the cylinder block contains a water jacket, through which coolant is pumped to cool the
cylinders.
The oil pan is bolted onto the bottom of the cylinder block. The oil pan is an oil reservoir made of
pressed sheet steel. A dividing plate is included 'inside the oil pan to keep sufficient oil in the
bottom of the pan even when the vehicle is tilted. This dividing plate also prevents the oil from
making waves when the vehicle is stopped suddenly and the oil shifts away from the oil pump
suction pipe.
The 5S±FE engine uses two balance shafts. The balance shafts are fitted in balance shaft
housings that are located at the bottom of the cylinder block. The No. 1 balance shaft is driven by
the drive gear of the crankshaft No.3 counterweight at twice the speed of the crankshaft. The No.
2 balance shaft is driven by the No±1 balance shaft at the same speed in the same direction as the
crankshaft. The balance shafts are designed to eliminate secondary inertia force from the engine,
thereby reducing the engine noise (booming noise).
± 5S±FE ENGINEENGINE MECHANICALEG1±3

2. Except Delco Battery:
CHECK BATTERY VOLTAGE AND SPECIFIC
GRAVITY
A. Maintenance Free Battery
Measure the battery voltage between the terminals
negative (±) and positive (+) of the battery.
Standard voltage:
12.7 ± 12.9 V at 205C (685F)
HINT:
wBefore measuring the voltage, turn the ignition
switch to LOCK and turn off the electrical sys±
tems (headlight, blower motor, rear defogger etc.)
for 60 seconds to remove the surface charge.
wIf the vehicle has been running, wait 5 minutes or
more after the vehicle stops before measuring
the battery voltage.
If the voltage is less than specification, charge the
battery.
HINT: Check the indicator as shown in the illustration. 1. Except Delco Battery:
CHECK BATTERY ELECTROLYTE LEVEL
Check the electrolyte quantity of each cell.
A. Maintenance Free Battery
If under the lower level, replace the battery (or add
distilled water if possible). Check the charging system.
B. Except Maintenance Free Battery
If under the ªLOWERº or ªMINº line, add distilled
water.
BATTERY INSPECTION
± 5S±FE ENGINEENGINE MECHANICALEG1±9