TOYOTA CAMRY 2018 (in English) Owner's Guide
Manufacturer: TOYOTA, Model Year: 2018, Model line: CAMRY, Model: TOYOTA CAMRY 2018Pages: 52, PDF Size: 1.78 MB
Page 31 of 52
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
29
1 V T I iMENU” button next to the screen.
4 F M F D U iSetup” or “General ” in the touch screen to access the general settings
screen.
4 F M F D U iClock. ”
5 I F O T F M F D U E F T J S F E J U F N T U P C F S F T F U
Refer to the a“2018 Entune
™ Audio Quick Reference Guide” for more details.
1 Entune™ Premium Audio only2 Entune™ Audio Plus/Entune Premium Audio only
Garage door opener (HomeLink®*) (if equipped)
Garage door openers manufactured under license from HomeLink®* can be
programmed to operate garage doors, estate gates, security lighting, etc\
.
Refer to “Garage door opener,” Section 5-4 in the Owner’s Manua\
l for more
details.
For programming assistance, contact HomeLink
® at 1-800-355-3515, or visit
I U U Q X X X I P N F M J O L D P N
* HomeLink ®
J T B S F H J T U F S F E U S B E F N B S L P G + P I O T P O $ P O U S P M T
* O D
Buttons
Remote
HomeLink® indicator light
Garage door operation
indicators
Select to change time zone
Select to daylight savings
time ON/OFF/AUTO.1
Select to set to automatic
GPS adjustment of clock.2
Select to set hour display
to 12 or 24 hour time.
Clock
Page 32 of 52
![TOYOTA CAMRY 2018 (in English) Owners Guide 30
Quick overview-Toyota Safety Sense™ P (TSS-P)
Sensors
TSS-P combines an in-vehicle camera mounted in front of the inside rear \
view mirror
and a millimeter-wave radar mounted in the front grill](/img/14/42428/w960_42428-31.png "TOYOTA CAMRY 2018 (in English) Owners Guide 30
Quick overview-Toyota Safety Sense™ P (TSS-P)
Sensors
TSS-P combines an in-vehicle camera mounted in front of the inside rear \
view mirror
and a millimeter-wave radar mounted in the front grill")
30
Quick overview-Toyota Safety Sense™ P (TSS-P)
Sensors
TSS-P combines an in-vehicle camera mounted in front of the inside rear \
view mirror
and a millimeter-wave radar mounted in the front grill. These sensors su\
pport the
driver assist systems.
TOYOTA SAFETY SENSE™
Toyota Safety Sense™ 1 5 4 4 1
J T B T F U P G B D U J W F T B G F U Z U F D I O P M P H J F T E F T J H O F E
to help mitigate or prevent collisions across a wide range of traffic si\
tuations, in
certain conditions. TSS-P is designed to help support the driver’s aw\
areness,
decision making and vehicle operation contributing to a safe driving exp\
erience.
5 H I H U W R W K H 2 Z Q H U
Page 33 of 52
![TOYOTA CAMRY 2018 (in English) Owners Guide 31
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
The Pre-Collision System uses a radar sensor and camera sensor to help d\
etect a
vehicle or pedestrian in front of y](/img/14/42428/w960_42428-32.png "TOYOTA CAMRY 2018 (in English) Owners Guide 31
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
The Pre-Collision System uses a radar sensor and camera sensor to help d\
etect a
vehicle or pedestrian in front of y")
31
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
The Pre-Collision System uses a radar sensor and camera sensor to help d\
etect a
vehicle or pedestrian in front of your vehicle.
As there is a limit to the degree of recognition accuracy and control pe\
rformance
that this system can provide, do not overly rely on this system. This sy\
stem will not
prevent collisions or lessen collision damage or injury in every situati\
on. Do not use
PCS instead of normal braking operations under any circumstances. Do not\
attempt
to test the operation of the pre-collision system yourself, as the syste\
m may not
operate or engage, possibly leading to an accident. In some situations, \
such as
when driving in inclement weather such as heavy rain, fog, snow or a san\
dstorm or
while driving on a curve and for a few seconds after driving on a curve,\
a vehicle
may not be detected by the radar and camera sensors, preventing the syst\
em from
operating or engaging properly.
Refer to a Toyota Owner’s Manual for a list of additional situations \
in which the
system may not operate properly.
Refer to a Toyota Owner’s Manual for additional information on PCS w/\
PD operation,
settings adjustments, limitations, and precautions before attempting to \
use it. Pre-Collision Warning
When the system determines that the possibility of a frontal collision i\
s high, a
buzzer will sound and a warning message will be displayed on the Multi-I\
nformation
% J T Q M B Z . * %
U P V S H F U I F E S J W F S U P U B L F F W B T J W F B D U J P O
Pre-Collision Brake Assist
If the driver notices the hazard and brakes, the system may provide addi\
tional
braking force using Brake Assist. This system may prime the brakes and m\
ay apply
greater braking force in relation to how strongly the brake pedal is dep\
ressed.
Pre-Collision Braking
If the driver does not brake in a set time and the system determines tha\
t the
possibility of a frontal collision with a preceding vehicle is extremely\
high, the
system may automatically apply the brakes, reducing speed in order to he\
lp the
driver reduce the impact and in certain cases avoid the collision.
Pre-Collision System with Pedestrian
Detection function (PCS w/PD)
Page 34 of 52
32
TOYOTA SAFETY SENSE™
CHANGING THE PCS ALERT TIMING
FarMiddle
(default) Near
1 S F T T i” switches and select or from the Multi-Information Display
. * %
1 S F T T i
” switches and select from the MID and then press “”. The
setting screen is displayed.
1 S F T T i
” each time to change the setting. Each time it is pressed, the
response to the PCS alert timing changes as shown above. You can press “\
” to
go back to the menu.
Note: PCS is enabled each time the engine switch is turned to Ignition O\
n.
The system can be disabled/enabled and the alert timing of the system ca\
n be
changed. (Alert timing only, brake operation remains the same).
Monocular camera sensor
Millimeter
wave radar
As part of the Pre-Collision System, this function is also designed to f\
irst provide an
alert and then automatic braking if needed.In certain conditions, the PCS system included with the TSS-P package ma\
y also
help to detect a pedestrian in front of your vehicle. With Toyota Safety\
Sense™ P,
PCS uses an in-vehicle camera and front-grill mounted millimeter-wave ra\
dar to
help detect a pedestrian in front of your vehicle in certain conditions.\
The in-vehicle
camera of PCS detects a potential pedestrian based on size, profile, and\
motion of
the detected pedestrian. However, a pedestrian may not be detected depen\
ding
on the conditions, including the surrounding brightness and the motion, \
posture,
size, and angle of the potential detected pedestrian, preventing the sys\
tem from
operating or engaging. Refer to a Toyota Owner’s Manual for additional information.
PEDESTRIAN DETECTION FUNCTION
Page 35 of 52
33
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
% * 4 " # - * / ( 5 ) & 1 3 & $ 0 - - * 4 * 0 / 4 : 4 5 & . 1 $ 4
LDA in TSS-P uses an in-vehicle camera designed to detect visible white \
and yellow
lane markers in front of the vehicle and the vehicle’s position on th\
e road. If the
system determines that the vehicle is starting to unintentionally deviat\
e from its lane,
the system alerts the driver with an audio and visual alert. When the al\
erts occur, the
driver must check the surrounding road situation and carefully operate t\
he steering
wheel to move the vehicle back to the center part of their lane.
- % " J T E F T J H O F E U P G V O D U J P O B U T Q F F E T P G B Q Q S P Y J N B U F M Z N Q I L N I
P S I J H I F S
on relatively straight roadways.
In addition to the alert function, LDA w/SA also features a steering ass\
ist
function. When enabled, if the system determines that the vehicle is on \
a path to
unintentionally depart from its lane, the system may provide small corre\
ctive steering
inputs to the steering wheel for a short period of time to help keep the\
vehicle in its
lane.
Lane Departure Alert with
Steering Assist function (LDA w/SA)
1 S F T T i” switches and select or from the Multi-Information
% J T Q M B Z . * %
1 S F T T i
” and “” switches to change the setting.
1 S F T T i
” to go back to the menu.
Note: The system is enabled each time the power switch is turned to ON
mode.
Refer to a Toyota Owner’s Manual for additional information on PCS op\
eration,
settings adjustments, limitations, and precautions before attempting to \
use it.
Page 36 of 52
![TOYOTA CAMRY 2018 (in English) Owners Guide 34
TOYOTA SAFETY SENSE™
TURNING THE LDA SYSTEM ON/OFF
Press the LDA switch to turn the LDA system on. Depress again to turn it\
off.
Note: Operation of the LDA system and setting adjustments contin](/img/14/42428/w960_42428-35.png "TOYOTA CAMRY 2018 (in English) Owners Guide 34
TOYOTA SAFETY SENSE™
TURNING THE LDA SYSTEM ON/OFF
Press the LDA switch to turn the LDA system on. Depress again to turn it\
off.
Note: Operation of the LDA system and setting adjustments contin")
34
TOYOTA SAFETY SENSE™
TURNING THE LDA SYSTEM ON/OFF
Press the LDA switch to turn the LDA system on. Depress again to turn it\
off.
Note: Operation of the LDA system and setting adjustments continues in t\
he
same condition regardless of Ignition cycle until changed by the driver \
or the
system is reset.
Refer to a Toyota Owner’s Manual for additional information on LDA op\
eration,
settings adjustments, limitations, and precautions before attempting to \
use it.
LDA FUNCTIONS
LDA function display
Steering assist indicatorLDA indicatorLane
(2)
(1)
- B O F % F Q B S U V S F " M F S U - % "
J O E J D B U P S T J M M V N J O B U J P O T I P X T U I F T Z T U F N P Q F S B U J P O
status.
Page 37 of 52
35
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
The LDA function E J T Q M B Z T X I F O U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
J T T X J U D I F E
to the driving assist system information screen.
5 I F T Z T U F N E J T Q M B Z T X I J U F T P M J E M J O F T B O E B X I J U F - % " J O E J D B U P S X I F O W J T J C M F M B O F
markers on the road are detected and system is operating. Both the LDA i\
ndicator
and a side line flashes yellow to alert the driver when the vehicle devi\
ates from its
lane.
5 I F - % " J O E J D B U P S J T H S F F O X I F O T U F F S J O H B T T J T U G V O D U J P O J T P Q F S B U J O H
5 I F T Z T U F N E J T Q M B Z T P V U M J O F T P O U I F - % " J O E J D B U P S X I F O M B O F N B S L F S T P O U I F S P B E
are not detected or the function is temporarily cancelled.
Note: When operation conditions are no longer met, a function may be
temporarily canceled. However, when the operation conditions are met aga\
in,
operation of the function is automatically restored. For example, LDA ma\
y not
function on the side(s) where white/yellow lines are not detectable.
Refer to a Toyota Owner’s Manual for additional information on LDA op\
eration,
settings adjustments, limitations, and precautions before attempting to \
use it.
" % + 6 4 5 * / ( 5 ) & - % " " - & 3 5 4 & / 4 * 5 * 7 * 5 :
DISABLING THE STEERING ASSIST FUNCTION
5 I F E S J W F S D B O B E K V T U U I F T F O T J U J W J U Z P G U I F - % " X B S O J O H
G V O D U J P O G S P N U I F
. V M U J * O G P S N B U J P O % J T Q M B Z . * %
D V T U P N J [ B U J P O T D S F F O
High - Is designed to warn approximately before the front
tire crosses the lane marker.
Normal - Is designed to warn approximately when the front
tire crosses the lane marker.
1 S F T T i
” switches and select or from the Multi-Information Display
. * %
1 S F T T i
” switches and select the setting function and then press “.”
1 S F T T i
” each time to change the setting.
1 S F T T i
” to go back to the menu.
1 S F T T i
” switches and select or from the Multi-Information
% J T Q M B Z . * %
1 S F T T i
” switches and select the setting function and then press “.”
1 S F T T i
” each time to change the setting.
1 S F T T i
” to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in t\
he
same condition regardless of Ignition cycle until changed by the driver \
or the
system is reset.
- % " ' 6 / $ 5 * 0 / 4 $ 0 / 5 * / 6 & %
Page 38 of 52
![TOYOTA CAMRY 2018 (in English) Owners Guide 36
TOYOTA SAFETY SENSE™
7 & ) * $ - & 4 8 " : 8 " 3 / * / ( 4 : 4 5 & . 4 8 4
6 / $ 5 * 0 /
SWS is a function of LDA and is designed to detect swaying based on the \
vehicle
locati](/img/14/42428/w960_42428-37.png "TOYOTA CAMRY 2018 (in English) Owners Guide 36
TOYOTA SAFETY SENSE™
7 & ) * $ - & 4 8 \" : 8 \" 3 / * / ( 4 : 4 5 & . 4 8 4
6 / $ 5 * 0 /
SWS is a function of LDA and is designed to detect swaying based on the \
vehicle
locati")
36
TOYOTA SAFETY SENSE™
7 & ) * $ - & 4 8 " : 8 " 3 / * / ( 4 : 4 5 & . 4 8 4
' 6 / $ 5 * 0 /
SWS is a function of LDA and is designed to detect swaying based on the \
vehicle
location in the lane and the driver’s steering wheel operation. To he\
lp prevent
swaying, the system alerts the driver using a buzzer sound and a warning\
displays
in the MID.
Continuous lane deviations from
swaying.
Gentle swaying from driver’s
inattentiveness.
Acute steering wheel operation after the
number of operations decrease due to driver’s
inattentiveness.
1 S F T T i” switches and select or from the Multi-Information
% J T Q M B Z . * %
1 S F T T i
” switches and select the setting function and then press “.”
1 S F T T i
” each time to change the setting.
1 S F T T i
” to go back to the menu.
1 S F T T i
” switches and select or from the Multi-Information
% J T Q M B Z . * %
1 S F T T i
” switches and select the setting function and then press “.”
1 S F T T i
” each time to change the setting.
1 S F T T i
” to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in t\
he
same condition regardless of Ignition cycle until changed by the driver \
or the
system is reset.
" % + 6 4 5 * / ( 4 8 " : " - & 3 5 4 & / 4 * 5 * 7 * 5 :
DISABLING SWS
Page 39 of 52
37
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
TURNING SYSTEM ON/OFF
" % + 6 4 5 * / ( 4 & 5 4 1 & & %
Vehicle will cruise at a set speed, decelerate to maintain selected dist\
ance from a
slower vehicle traveling in front and accelerate back up to the selected\
speed if the
vehicle in front changes lanes or speeds up.
(1) Push “
” to turn DRCC system ON.
(2) Use the steering wheel controls to increase speed by pushing “+RES” or decrease the speed by pushing “-SET”. Push and hold to make a large
B E K V T U N F O U P S Q V T I F B D I U J N F U P N B L F G J O F B E K V T U N F O U T N Q I L N I
J O D S F N F O U T
(3) Push “Cancel” to cancel the adjusting speed operation.(1)
Note: Push once to turn DRCC
ON. Push again to turn OFF.
After DRCC is turned off and you
hold the cruise control switch for
at least 1.5 seconds, the system
switches to constant speed
control mode.
(2) (3)
DRCC helps maintain a pre-set distance to a preceding vehicle when the p\
receding
vehicle is traveling at a lower speed. This mode is always selected firs\
t when the cruise
control button is depressed. Constant speed cruise control mode is also \
available.
Full-Speed Range* DRCC is designed to function at speeds between 0 to ap\
proximately
110 MPH and is intended for highway use.
Resume/
Set speed
Cruise control
Increase speed
Descrease speed Set speed
*If equipped.
Cancel
Cruise control switches
Dynamic Radar Cruise Control (DRCC) or
Full-Speed Range* DRCC
Display
Set speed Dynamic Radar Cruise Control
vehicle-to-vehicle distance button
Indicators
Page 40 of 52
38
TOYOTA SAFETY SENSE™
" % + 6 4 5 * / ( % * 4 5 " / $ &
To change the vehicle-to-
vehicle distance
Push the “
” button
to cycle through the
settings, which will change
progressively.
This mode employs a radar sensor to detect the presence of a preceding v\
ehicle
V Q U P B Q Q S P Y J N B U F M Z G U N
B I F B E
E F U F S N J O F T U I F D V S S F O U W F I J D M F U P W F I J D M F
following distance and operates to maintain a suitable following distanc\
e from the
vehicle ahead. These distances vary based on vehicle speed.
(1) (2) (3)
Constant speed cruising when there are no vehicles ahead
The vehicle travels at the speed set by the driver. The desired vehicle-\
to-
vehicle distance can also be set by operating the vehicle-to-vehicle dis\
tance
control.
Deceleration cruising and follow-up cruising when a preceding vehicle
driving slower than the set speed appears When a vehicle is detected running ahead of you, the system automaticall\
y
decelerates your vehicle. When a greater reduction in vehicle speed is
O F D F T T B S Z
U I F T Z T U F N B Q Q M J F T U I F C S B L F T U I F T U P Q M J H I U T X J M M D P N F P O B U U I J T
U J N F
5 I F T Z T U F N X J M M S F T Q P O E U P D I B O H F T J O U I F T Q F F E P G U I F W F I J D M F B I F B E
in order to maintain the vehicle-to-vehicle distance set by the driver. \
A warning
tone warns you when the system cannot decelerate sufficiently to prevent\
your
vehicle from closing in on the vehicle ahead.
Note: Vehicle-to-vehicle distance will close in when traveling on long d\
ownhill
slopes.
LONG
(default setting)MIDDLE SHORT
Preceding
vehicle mark