jump start TOYOTA CAMRY HYBRID 2016 XV50 / 9.G Owners Manual
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 2016, Model line: CAMRY HYBRID, Model: TOYOTA CAMRY HYBRID 2016 XV50 / 9.GPages: 572, PDF Size: 7.25 MB
Page 490 of 572

4908-2. Steps to take in an emergency
CAMRY_HV_U (OM33C35U)
If you have a set of jumper (or booster) cables and a second vehicle
with a 12-volt battery, you can jump  start your vehicle by following the
steps below.
Vehicles with an alarm, confirm
that the electronic key is being
carried.
When connecting the jumper (or
booster) cables, depending on the
situation, the alarm may activate
and doors locked. ( P. 81)
Open the hood and remove the
fuse box cover.
Push the tabs in and lift the lid off.
Open the exclusive jump start-
ing terminal cover.
Push the tab in and open the cover.
If the vehicle 12-volt batter y is discharged
The following procedures may be used to start the hybrid sys-
tem if the vehicle’s 12-volt battery is discharged.
You can also call your Toyota de aler or a qualified repair shop.
1
2
3 
Page 491 of 572

4918-2. Steps to take in an emergency
8
When trouble arises
CAMRY_HV_U (OM33C35U)
Connect the jumper cables according to the following procedure:Connect a positive jumper cabl e clamp to the exclusive jump
starting terminal on your vehicle.
Connect the clamp on the other e nd of the positive cable to the
positive (+) battery terminal on the second vehicle.
Connect a negative cable clamp to the negative (-) battery termi-
nal on the second vehicle.
Connect the clamp at the other  end of the negative cable to a
solid, stationary, unpainted metallic  point away from the exclusive
jump starting terminal and any moving parts, as shown in the
illustration.4
1
2
3
4 
Page 492 of 572

4928-2. Steps to take in an emergency
CAMRY_HV_U (OM33C35U)
Start the engine of the second vehicle. Increase the engine speed
slightly and maintain at that level for approximately 5 minutes to
recharge the 12-volt battery of your vehicle.
Open and close any of the doors  of your vehicle with the power
switch off.
Maintain the engine speed of the second vehicle and turn the power
switch to ON mode, then start the vehicle's engine.
Make sure the “READY” indicato r comes on. If the indicator does
not come on, contact your Toyota dealer.
Once the hybrid system has start ed, remove the jumper cables in
the exact reverse order from  which they were connected.
Close the exclusive jump starting terminal cover, and reinstall the
fuse box cover to its original position.
Once the hybrid system starts, have the vehicle inspected at your
Toyota dealer as soon as possible.5
6
7
8
9
10 
Page 495 of 572

4958-2. Steps to take in an emergency
8
When trouble arises
CAMRY_HV_U (OM33C35U)
NOTICE
nWhen handling jumper cables
When connecting the jumper cables, ensure that they do not become entan-
gled in the cooling fan or engine drive belt.
n Exclusive jump starting terminal
The exclusive jump starting terminal  is to be used when charging the 12-volt
battery from another vehicle in an emergency. It cannot be used to jump
start another vehicle. 
Page 561 of 572

561Alphabetical index
CAMRY_HV_U (OM33C35U)
Engine....................................... 506Compartment ........................ 396
Engine switch........................ 161
Hood ..................................... 394
How to start the hybrid 
system ......... ....................... 161
Identification number ............ 505
If the hybrid system  will not start ........................ 484
Ignition switch  (power switch) .................... 161
Overheating .......................... 496
Power switch......................... 161
Engine coolant ......................... 400
Capacity ................................ 509
Checking ............................... 400
Preparing and checking before winter....................... 242
Engine coolant temperature  gauge........................................ 88
Engine oil ................................. 397 Capacity ................................ 507
Checking ............................... 397
Oil pressure warning message ............................. 460
Preparing and checking  before winter....................... 242
Engine switch .......................... 161
Enhanced VSC ......................... 218 Entune Audio system*........... 248
Audio input............................ 253
AUX port/USB port ............... 253
Bluetooth
® audio .................. 296
CD player.............................. 269
iPod ...................................... 275
MP3/WMA disc ..................... 269
Optimal use .......................... 266
Portable music player ........... 283
Radio .................................... 267
Steering wheel audio 
switch ................................. 252
USB memory ........................ 279
EPS 
(Electric Power Steering) ..... 219Function ................................ 219
Warning light......................... 447
EV drive mode ......................... 166
Event data recorder (EDR)........ 11
Exclusive jump starting  terminal .................................. 490
*: For vehicles with a navigation system or Entune Audio Plus, refer to
the “NAVIGATION AND MULTIMEDIA SYSTEM OWNER'S MANUAL”.