light TOYOTA CAMRY HYBRID 2019 (in English) User Guide

27
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Quick overview-Toyota Safety Sense™ P (TSS-P)
Sensors
TSS-P combines an in-vehicle camera mounted in front of the inside rear \
view mirror
and a millimeter-wave radar mounted in the front grill. These sensors su\
pport the
driver assist systems.
TOYOTA SAFETY SENSE™
Toyota Safety Sense™ 1 5441
is a set of active safety technoMogies designed
to heMQ mitigate or Qrevent coMMisions across a wide range of traffic situations, in
certain conditions. 5441 is designed to heMQ suQQort the drivers awareness,
decision maLing and vehicMe oQeration contriCuting to a safe driving eYQerience.
Refer to the Owner’s Manual for operation, setting adjustments, limitations and
more details to understand these functions and complete safety precautions. For
more information, please go to http://www.toyota.com/safety-sense
Lane Departure Alert with Steering Assist (LDA w/SA)
LDA w/SA is designed to provide notification when the system detects an \
unintended lane departure.
The Steering Assist function is designed to provide small corrective
steering inputs to the steering wheel for a short period of time to help\

keep the vehicle in its lane.
Automatic High Beams (AHB)
AHB is designed to detect the headlights of oncoming vehicles and the
tail lights of preceding vehicles and switch between high beams and low \
beams as appropriate.
Pre-Collision System with Pedestrian Detection (PCS w/PD)
1$4 w1% is designed to Qrovide aMert, mitigation, andor avoidance
suQQort in certain conditions, when the system detects a QotentiaM
collision with a preceding vehicle is likely to occur.
The advanced millimeter-wave radar sensor system is designed to
worL with the camera sensor to heMQ recogni[e a Qreceding Qedestrian,
and Qrovide an aMert, mitigation andor avoidance suQQort in certain
conditions.
Full-Speed Range Dynamic Radar Cruise Control (DRCC)
DRCC is designed to help maintain a pre-set distance to a preceding
vehicle when the preceding vehicle is traveling at a lower speed.
Camera sensor
Radar sensor

37
AHB is a safety system designed to help drivers see more of what’s ah\
ead at
nighttime and reduce gMare for oncoming drivers. 8hen enaCMed, A)# uses an
in-vehicle camera to help detect the headlights of oncoming vehicles and\
tail lights
of Qreceding vehicMes, then automaticaMMy switches Cetween high and Mow Ceams
as appropriate to provide the most light possible and enhance forward vi\
sibility.
#y using high Ceams more freRuentMy, the system may aMMow earMier detection of
pedestrians and obstacles.
Refer to the Toyota Owner’s Manual for additional information on AHB \
operation,
settings adjustments, limitations, and precautions before attempting to \
use it.
Automatic High Beams (AHB)

8ith the engine switch in I(/I5I0/ 0/ mode, turn the headMight switch to
iA650w or i
i position.

1ush Mever away from you.

1ress the i
w switch.

The AHB indicator will come on when the headlights are turned on automat\
ically
to indicate that the system is active.
Note: Pull the lever back toward you to turn the AHB system off.
5he A)# indicator wiMM turn off. 5urn switch to i
w Qosition and the manuaM high
Ceam indicator i
w turns on.
8hen aMM of these conditions are met, high Ceams wiMM Ce automaticaMMy turned on
after aQQroYimateMy  second

t 7ehicMe sQeed is aCove aQQroYimateMy  mQh  Lmh.

• The area ahead of the vehicle is dark.
• There are no oncoming or preceding vehicles with headlights or tail\
lights turned
on.
• There are few street lights on the road ahead.
If any of these conditions occur, the system is designed to automaticaMMy turn off
high Ceams
t 7ehicMe sQeed droQs CeMow aQQroYimateMy  mQh  Lmh.

• The area ahead of the vehicle is not dark.
• Oncoming or preceding vehicles have headlights or tail lights turne\
d on.
• There are many streetlights on the road ahead.
A$5I7A5I/( 5)& A)# 4:45&.
$0/%I5I0/4 8)&3& A)# 8I-- 563/ 0/0'' A650.A5I$A--:
(1) (2)
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES

38
SAFETY & EMERGENCY FEATURES
Seat belts
NOTE: If a passenger’s seat belt is fully extended, then retracted even slightly,
the Automatic Locking Retractor (ALR) will prevent it from being re-extended
beyond that point, unless fully retracted again. This feature is used to help
hold child restraint systems securely.
To find more information about seat belts, and how to install a child re\
straint
system, refer to the Owner’s Manual.
Keep as low on hips
as possible
Take up slack
Too high
Rear door child safety locks
Moving the lever downward will allow the door to be opened only from the\
outside.
Rear door
Lock
Unlock
Seat belts - Shoulder belt anchor
Push up, or squeeze
lock release to lower

39
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Safety Connect® (if equipped)
Safety Connect® is a subscription-based telematics service that uses Global
1ositioning 4ystem (14
data and emCedded ceMMuMar technoMogy to Qrovide safety
and security features to subscribers. Safety Connect
® is supported by Toyota’s
designated resQonse center, which oQerates  hours Qer day,  days Qer weeL.
4ervices for suCscriCers incMude Automatic coMMision notification, 4toMen vehicMe
Mocation, &mergency assistance Cutton and &nhanced roadside assistance.
Contact your dealer for more information about Safety Connect
®.
Microphone
LED Indicators “SOS” button
Tire Pressure Monitoring (warning) System (TPMS)
The tire pressure detected by the tire pressure warning system can
Ce disQMayed on the muMtiinformation disQMay .I%
.
Refer to the load label on the door jamb or the Owner’s Manual for tire inflation
specifications.
If the tire Qressure indicator fMashes for more than  seconds and then remains on,
take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or
changes in tire pressure from natural air leakage. If the system has not been
initialized
recently, setting the tire pressures to factory specifications should
turn off the light.
5he tire Qressure warning system can Ce seMected on iw of the muMti
information disQMay .I%
.
System rest initialization

4eMect iw and them Qush and hoMd iw.

4eMect i5184w and them Qush i
w.

4eMect i4et 1ressurew then Qush and hoMd i
w untiM the warning Might CMinLs
three times.
4.2-inch display 7-inch display

44
BLUETOOTH® DEVICE PAIRING
To begin the Bluetooth® 1airing Qrocess, Qress the )0.& Cutton on the faceQMate of
your multimedia system.
Bluetooth® Pairing for your phone
Pairing your phone is the first step in connecting with your Toyota for \
hands-free
calling and for audio streaming via Bluetooth. This pairing process is q\
uick and easy.
All you have to do is setup the phone and multimedia system to form a co\
nnection.
1
Select "Bluetooth", then select
"Add New Device"on display
screen.
Ensure Bluetooth is turned on for
your device.
Select "Device Name".
iPhone bluetooth MenuAndroid bluetooth Menu
1
Some Android devices may have slightly different SETTINGS screen layout\
depending on manufacturer of device and Android OS version.
Check the display on your smart
phone. Does the PIN XXXX
match the PIN displayed? If it
does select "Pair".
1ress <.&/6> on the faceQMate, then seMect