ECO mode TOYOTA CAMRY HYBRID 2019 Owners Manual (in English)

5
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURESBrake system warning1Malfunction/
Check Engine indicator1
Low Tire Pressure Warning1
Low fuel level warning
Security indicator
Fuel tank door position
READY indicator
Master warning
1,2
Headlight low/high beam
indicators
Turn signal indicator
Pre-Collision System (PCS)
warning light1,2
Lane Departure Alert (LDA) indicator
(white/green/yellow3 indicator)
Slip indicator,
Vehicle Stability Control OFF indicator1
Parking brake indicator2
Electric power steering warning1
(red/yellow indicator)
Intelligent Clearance Sonar (ICS) OFF
indicator,,
Rear passenger seat belt reminder
indicator Type A
Rear passenger seat belt reminder
indicator Type B
Electric brake hold operated indicator,
Electric brake hold standby indicator1
BSM w/Rear Cross Traffic Alert (RCTA)
Indicator4
BSM outside rear view mirror
indicators4
Sport mode driving indicator
ECO MODE indicator
EV drive mode indicator
EV indicator
Low outside temperature indicator
Brake system warning
(yellow indicator)1
Full-Speed Dynamic Radar Cruise
Control (DRCC) indicator/DRCC
SET indicator
Constant speed cruise control
indicator/Constant speed
cruise control SET indicator
Driver’s and
front passenger’s seat belt
reminder (alarm will sound if speed is over
12 mph)
1 If the indicator does not turn off within a few seconds of starting the \
Hybrid System, there may be a
malfunction. Have the vehicle inspected by your Toyota dealer.
2 If the indicator flashes, there may be a malfunction. Refer to the Owner\
’s Manual.3 If the indicator flashes, it indicates that the system is operating.4 If equipped.

6
LOCKING OPERATION
UNLOCKING OPERATION
TRUNK LID
PANIC BUTTON
NOTE: If a door is not opened within 60 seconds of unlocking, all doors will
relock for safety.
OVERVIEWKeyless entry
All-door lock
Touch
Carry remote Smart Key
Carry remote Smart Key
Carry remote Smart Key
Grasp
Driver door unlock*
Push
ONCE: Driver door TWICE: All doors
Push
Push
Push and hold
 %river door unMocLing function can Ce Qrogrammed to unMocL driver door onMy,
or aMM doors. In some modeMs, grasQing front Qassenger door handMe wiMM unMocL aMM
doors. Please refer to the Owner’s Manual for more details on how to program\
the
doors.
NOTE: Doors may also be locked/unlocked using remote.
Push

10
Hybrid transmission
Auto lock/unlock
Park*
Reverse
Neutral
Drive
“S” mode
FEATURES & OPERATIONS
Automatic door MocLs can Ce Qrogrammed to oQerate in different modes, or turned
OFF.
Shift position linked door locking/unlocking function
-Doors lock when shifting from Park.
-Doors unlock when shifting into Park.
Speed linked door locking function
-%oors MocL when the vehicMe sQeed goes aCove aQQroYimateMy  mQh  Lmh
.
Driver’s door linked door unlocking function
-Doors unlock when the engine switch is set to OFF and driver’s door i\
s opened.
Refer to the Owner’s Manual for more details.
 5he i108&3w switch must Ce i0/w and the CraLe QedaM deQressed to shift from Park.
4hift the shift Mever to i4w Qosition from i%w Qosition.
+  6Qshift Qush and reMease

-  %ownshift QuMM and reMease

%ownshifting increases Qower going uQhiMM, or Qrovides engine CraLing downhiMM. 'or
Cest fueM economy during normaM driving conditions, aMways drive with the shift Mever
in the i%w Qosition.
i4w 4&26&/5IA-
.0%&
+ (“S” mode)
- (“S” mode)

12
EV drive mode
Vehicle Stability Control (VSC)/TRAC OFF Switch
FEATURES & OPERATIONSDrive mode select switches
Use EV drive mode when driving short distances to reduce noise late at n\
ight in
residential areas or to cut emissions when parking in a small garage or\
underground
car park.
The VSC OFF switch can be used to help free a stuck vehicle in surroundi\
ngs like
mud, dirt or snow. 8hiMe the vehicMe is stoQQed, Qress switch to disaCMe the 53A$
system.
5o disaCMe Coth 74$ and 53A$ systems, Qress and hoMd the switch for at Meast 
seconds.
Refer to the Owner’s Manual for limitations and more details.
Normal -
Suitable for normal driving.
SPORT mode -
Use when a higher level
of response is desired,
such as when driving in
mountainous regions.
ECO MODE -
Helps achieve lower fuel
consumption during trips
that involve frequent
accelerating and braking. Refer to the Owner’s Manual for more details.

24
Audio switches
Multi-Information Display (MID) control switches
Phone switches
MicrophoneBluetooth
® technology allows dialing or receipt of calls without removing your han\
ds
from the steering wheel or using a cable to connect the compatible telephone \
and
the system.
* Push and hold to access Mobile Assistant. When a compatible smartphone is
Bluetooth® connected push and hold the Voice command switch 2-3 seconds to
access Siri® Eyes Free.
Refer to the “Bluetooth
® Device Pairing Section” in this guide for more information
about phone connections and compatibility.
Refer to the “Navigation and Multimedia System Owner’s Manual” \
for more details.
NOTE: Concentrating on the road should always be your first priority whi\
le driving. Do not
use the hands-free phone system if it will distract you.
FEATURES & OPERATIONS
Volume controls
Return to
previous screen
Voice command switch/
Mobile Assistant access*
Select/enter
Seek
Steering wheel switches
(Audio, MID & phone: Bluetooth®)
“MODE”
Push to turn audio ON and select an audio
mode. Push and hold to turn the audio OFF.
Receive/end call
“
/” or “/”
press to scroll screens,
change the displayed
content and move the
cursor.

30
TOYOTA SAFETY SENSE™
%I4A#-I/( 13&$0--I4I0/ 4:45&. 1$4

LDA in TSS-P uses an in-vehicle camera designed to detect visible white \
and yellow
lane markers in front of the vehicle and the vehicle’s position on th\
e road. If the
system determines that the vehicMe is starting to unintentionaMMy deviate from its Mane,
the system aMerts the driver with an audio and visuaM aMert. 8hen the aMerts occur, the
driver must check the surrounding road situation and carefully operate t\
he steering
wheel to move the vehicle back to the center part of their lane.
-%A is designed to function at sQeeds of aQQroYimateMy  mQh  Lmh
or higher
on relatively straight roadways.
In addition to the aMert function, -%A w4A aMso features a steering assist
function. 8hen enaCMed, if the system determines that the vehicMe is on a Qath to
unintentionaMMy deQart from its Mane, the system may Qrovide smaMM corrective steering
inputs to the steering wheel for a short period of time to help keep the\
vehicle in its
lane.
Lane Departure Alert with Steering Assist
(LDA w/SA)
Press the PCS switch for 3 seconds or more to turn it off. The warning l\
ight and
message displays in the MID. Depress it again to turn it back on.
Note: The system is enabled each time the power switch is turned to ON
mode.
Refer to a Toyota Owner’s Manual for additional information on PCS op\
eration,
settings adjustments, limitations, and precautions before attempting to \
use it.

36
TOYOTA SAFETY SENSE™
SWITCHING TO CONSTANT SPEED CONTROL MODE
SETTING CONSTANT SPEED CONTROL
Note: When your vehicle is too close to a vehicle ahead, and sufficient automatic
deceleration via the cruise control is not possible, the display will flash and the
buzzer will sound to alert the driver. An example of this would be if another driver
cuts in front of you while you are following a vehicle. Depress the brake pedal to
ensure an appropriate vehicle-to-vehicle distance.
If you are aMready using %3$$ iw, Qush Cutton again to turn the system off
first, then Qush and hoMd Cutton for at Meast . seconds to switch.
Note: When the engine is turned off, it will automatically default to DRCC.

Acceleration when there are no longer any preceding vehicles driving
slower than the set speed The system accelerates until the set speed is reached. The system then
returns to constant speed cruising.
1.5 seconds
A%+645I/( %I45A/$& $0/5I/6&%

Refer to a Toyota Owner’s Manual for additional information on DRCC o\
peration,
settings adjustments, limitations, and precautions before attempting to \
use it.To adjust speed or cancel, see steps (2) and (3) of ADJUSTING SET SPEED on
page 34.
Increase speed
Decrease speed

37
AHB is a safety system designed to help drivers see more of what’s ah\
ead at
nighttime and reduce gMare for oncoming drivers. 8hen enaCMed, A)# uses an
in-vehicle camera to help detect the headlights of oncoming vehicles and\
tail lights
of Qreceding vehicMes, then automaticaMMy switches Cetween high and Mow Ceams
as appropriate to provide the most light possible and enhance forward vi\
sibility.
#y using high Ceams more freRuentMy, the system may aMMow earMier detection of
pedestrians and obstacles.
Refer to the Toyota Owner’s Manual for additional information on AHB \
operation,
settings adjustments, limitations, and precautions before attempting to \
use it.
Automatic High Beams (AHB)

8ith the engine switch in I(/I5I0/ 0/ mode, turn the headMight switch to
iA650w or i
i position.

1ush Mever away from you.

1ress the i
w switch.

The AHB indicator will come on when the headlights are turned on automat\
ically
to indicate that the system is active.
Note: Pull the lever back toward you to turn the AHB system off.
5he A)# indicator wiMM turn off. 5urn switch to i
w Qosition and the manuaM high
Ceam indicator i
w turns on.
8hen aMM of these conditions are met, high Ceams wiMM Ce automaticaMMy turned on
after aQQroYimateMy  second

t 7ehicMe sQeed is aCove aQQroYimateMy  mQh  Lmh.

• The area ahead of the vehicle is dark.
• There are no oncoming or preceding vehicles with headlights or tail\
lights turned
on.
• There are few street lights on the road ahead.
If any of these conditions occur, the system is designed to automaticaMMy turn off
high Ceams
t 7ehicMe sQeed droQs CeMow aQQroYimateMy  mQh  Lmh.

• The area ahead of the vehicle is not dark.
• Oncoming or preceding vehicles have headlights or tail lights turne\
d on.
• There are many streetlights on the road ahead.
A$5I7A5I/( 5)& A)# 4:45&.
$0/%I5I0/4 8)&3& A)# 8I-- 563/ 0/0'' A650.A5I$A--:
(1) (2)
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES