change time TOYOTA CAMRY HYBRID 2019 Owners Manual (in English)

45
CAMRY HYBRID 2019
This Quick Reference Guide is a summary of basic vehicle
operations. It contains brief descriptions of fundamental
operations so you can locate and use the vehicle’s main
equipment quickly and easily.
The Quick Reference Guide is not intended as a substitute for
the Owner’s Manual located in your vehicle’s glove box. We
strongly encourage you to review the Owner’s Manual and sup-
plementary manuals so you will have a better understanding of
your vehicle’s capabilities and limitations.
Your dealership and the entire staff of Toyota Motor North
America, Inc. wish you many years of satisfied driving in your
new Camry Hybrid.
A word about safe vehicle operations
This Quick Reference Guide is not a full description of Camry Hybrid
operations. Every Camry Hybrid owner should review the Owner’s Manual\
that
accompanies this vehicle.
Pay special attention to the boxed information highlighted in color thro\
ughout
the Owner’s Manual. Each box contains safe operating instructions to \
help you
avoid injury or equipment malfunction.
All information in this Quick Reference Guide is current at the time of \
printing.
Toyota reserves the right to make changes at any time without notice.
"Connecting" displays while
device is forming the connection
to your multimedia system.Enable Notifications (text
message). While pairing your
device message will display:
"You may need to allow
message access on your
phone".
Note: You may also select
"Skip" on display screen to skip
enabling notifications. If skipped
proceed to Step 8.
Turn on "Show Notifications" for
iPhone or "ON" for Android.
A confirmation will appear once
your phone has been paired and
connected.
iPhoneAndroid
Bluetooth® Pairing for your phone (cont.)
STEP 6
STEP 8
STEP 7
STEP 9

14
HEADLIGHTS
TURN SIGNALS
Lights & turn signals
FEATURES & OPERATIONS
1 The right hand signals will flash three times.2 The left hand signals will flash three times.
Parking lightsHeadlights
DRL OFF
AUTO
High beam
flasher
Right turn
Lane change1
Lane change2
Left turn
-Daytime Running Light system (DRL)
Automatically turns on under certain
conditions to make vehicle more visible to other drivers. Not for use at\
night.
-Automatic light cut off system AutomaticaMMy turns Mights off after  second deMay,
or lock switch on remote may be pushed after locking.
-Automatic High Beam (AHB) system Automatically switches between high and low
beams as appropriate to keep the high beam lamps on for as long as possi\
ble for
enhanced vision at night.
Refer to Toyota Safety Sense
™ P (TSS-P) in this guide or the Owner’s Manual for
more details on the Automatic High Beam feature.
* Operating conditions must be met. Refer to Owner’s Manual for detai\
ls.
High beam
Auto High Beam*or
Low beam

24
Audio switches
Multi-Information Display (MID) control switches
Phone switches
MicrophoneBluetooth
® technology allows dialing or receipt of calls without removing your han\
ds
from the steering wheel or using a cable to connect the compatible telephone \
and
the system.
* Push and hold to access Mobile Assistant. When a compatible smartphone is
Bluetooth® connected push and hold the Voice command switch 2-3 seconds to
access Siri® Eyes Free.
Refer to the “Bluetooth
® Device Pairing Section” in this guide for more information
about phone connections and compatibility.
Refer to the “Navigation and Multimedia System Owner’s Manual” \
for more details.
NOTE: Concentrating on the road should always be your first priority whi\
le driving. Do not
use the hands-free phone system if it will distract you.
FEATURES & OPERATIONS
Volume controls
Return to
previous screen
Voice command switch/
Mobile Assistant access*
Select/enter
Seek
Steering wheel switches
(Audio, MID & phone: Bluetooth®)
“MODE”
Push to turn audio ON and select an audio
mode. Push and hold to turn the audio OFF.
Receive/end call
“
/” or “/”
press to scroll screens,
change the displayed
content and move the
cursor.

26
FEATURES & OPERATIONS
To find your system, refer to Audio section of this guide.

1ush iMENUw Cutton neYt to the screen.

4eMect iSetupw or iGeneralw in the touch screen to access the generaM settings
screen.

4eMect iClock.w

5hen seMect desired items to Ce reset.

Refer to the “Navigation and Multimedia System Owner’s Manual” \
for more details.
1 Entune™ . 1remium Audio onMy.2 Entune™ . Audio 1Mus&ntune™ . 1remium Audio onMy.
Garage door opener (HomeLink®*) (if equipped)
Garage door openers manufactured under license from HomeLink®* can be
Qrogrammed to oQerate garage doors, estate gates, security Mighting, etc.
Refer to “Garage door opener,” Section 5-4 in the Owner’s Manua\
l for more
details.
'or Qrogramming assistance, contact )ome-inL
® at , or visit
httQwww.homeMinL.comtoyota.
* HomeLink ®
is a registered trademarL of +ohnson $ontroMs, Inc.
Buttons
Remote
HomeLink® indicator light
Garage door operation
indicators
Select to change time zone
Select to daylight savings
time ON/OFF/AUTO.1
Select to set to automatic
GPS adjustment of clock.2
Select to set hour display
to 12 or 24 hour time.
Clock

29
CHANGING PCS ALERT TIMING
FarMiddle
(default) Near
Monocular camera sensor
Millimeter
wave radar
As Qart of the 1re$oMMision 4ystem, this function is aMso designed to first Qrovide an
alert and then automatic braking if needed.
Refer to a Toyota Owner’s Manual for additional limitations and infor\
mation.6nder certain conditions, the 1$4 system incMuded with the 5441 QacLage may
also help to detect a pedestrian in front of your vehicle using the in-v\
ehicle camera
and front-grill mounted millimeter wave radar. The in-vehicle camera of \
PCS
detects a QotentiaM Qedestrian Cased on si[e, QrofiMe, and motion of the detected
Qedestrian. )owever, a Qedestrian may not Ce detected deQending on the
conditions, incMuding the surrounding Crightness and the motion, Qosture, si[e, and
angMe of the QotentiaM detected Qedestrian, Qreventing the system from oQerating or
engaging.
PCS PEDESTRIAN DETECTION

1ress iw switches and seMect or from the Multi-Information
%isQMay .I%
.

1ress i
w switches and seMect from the .I% and then Qress iw. 5he
setting screen is displayed.

1ress i
w each time to change the setting. &ach time it is Qressed, the
resQonse to the 1$4 aMert timing changes as shown aCove. :ou can Qress i
w to
go back to the menu.
Note: PCS is enabled each time the engine switch is turned to Ignition On.
The system can be disabled/enabled and the alert timing of the system can be
changed. (Alert timing only, brake operation remains the same).
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES

32
TOYOTA SAFETY SENSE™
The LDA function disQMays when the .uMtiInformation %isQMay .I%
is switched
to the driving assist system information screen.

5he system disQMays soMid white Mines on the -%A indicator when visiCMe Mane
markers on the road are detected. A side flashes orange to alert the dri\
ver when the
vehicle deviates from its lane.

5he system disQMays outMines on the -%A indicator when Mane marLers on the road
are not detected or the function is temporarily cancelled.
Note: When operation conditions are no longer met, a function may be
temporarily canceled. However, when the operation conditions are met again,
operation of the function is automatically restored. For example, LDA may not
function on the side(s) where white/yellow lines are not detectable.
Refer to a Toyota Owner’s Manual for additional information on LDA op\
eration,
settings adjustments, limitations, and precautions before attempting to \
use it.
A%+645I/( -%A A-&35 4&/4I5I7I5:
DISABLING STEERING ASSIST
5he driver can adKust the sensitivity of the -%A warning
function from the
.uMtiInformation %isQMay .I%
customi[ation screen.
High  Is designed to warn aQQroYimateMy Cefore the front
tire crosses the lane marker.
Normal  Is designed to warn aQQroYimateMy when the front
tire crosses the lane marker.
-A/& %&1A3563& A-&35 $0/5I/6&%


1ress iw switches and seMect or from the Multi-Information
%isQMay .I%
.

1ress i
w switches and seMect the setting function and then Qress i.w

1ress i
w each time to change the setting.

1ress i
w to go CacL to the menu.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.

1ress i
w switches and seMect or from the Multi-Information Display
.I%
.

1ress i
w switches and seMect the setting function and then Qress i.w

1ress i
w each time to change the setting.

1ress i
w to go CacL to the menu.

33
48A: 8A3/I/( 4:45&.
SWS is a function of LDA and is designed to detect swaying based on the \
vehicle
location in the lane and the driver’s steering wheel operation. To he\
lp prevent
swaying, the system aMerts the driver using a Cu[[er sound and a warning disQMays
in the MID.
Continuous lane deviations from
swaying.
Gentle swaying from driver’s
inattentiveness.
Acute steering wheel operation after the
number of operations decrease due to driver’s
inattentiveness.
A%+645I/( 48A: A-&35 4&/4I5I7I5:
%I4A#-I/( -%A 48A: 8A3/I/( 4:45&.

1ress iw switches and seMect or from the Multi-Information
%isQMay .I%
.

1ress i
w switches and seMect the setting function and then Qress i.w

1ress i
w each time to change the setting.

1ress i
w to go CacL to the menu.

1ress i
w switches and seMect or from the Multi-Information
%isQMay .I%
.

1ress i
w switches and seMect the setting function and then Qress i.w

1ress i
w each time to change the setting.

1ress i
w to go CacL to the menu.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES

34
TOYOTA SAFETY SENSE™
563/I/( 4:45&. 0/0''
A%+645I/( 4&5 41&&%
7ehicMe wiMM cruise at a set sQeed, deceMerate to maintain seMected distance from a
slower vehicle traveling in front and accelerate back up to the selected\
speed if the
vehicle in front changes lanes or speeds up.
(1) 1ush i
w to turn %3$$ system 0/.
(2) Use the steering wheel controls to increase speed by pushing “+RES” or
decrease the speed by pushing “-SET”. Push and hold to make a large
adKustment or Qush each time to maLe fine adKustments  mQh <. Lmh> or 
Lmh <. mQh> increments
.
(3) Push “Cancel” to cancel the adjusting speed operation. (1)
Full-Speed Range

Dynamic Radar Cruise Control (DRCC)
DRCC helps maintain a pre-set distance to a preceding vehicle when the p\
receding
vehicle is traveling at a lower speed. This mode is always selected firs\
t when the
cruise control button is depressed. Constant speed cruise control mode i\
s also
avaiMaCMe. 'uMM4Qeed 3ange %3$$ is designed to function at sQeeds Cetween  to
aQQroYimateMy  .1) and is intended for highway use.
Resume/
Set speed
Cruise control
Set speed Cancel
Cruise control switches
1ush once 0n
1ush twice 0ff
Refer to page 36 for switching to Constant Speed (Cruise) Control Mode\
.
1 The set speed may also be cancelled by depressing the brake pedal.2 5he set sQeed may Ce resumed once vehicMe sQeed eYceeds  mQh.
(2) (3) Increase speed/Resume1
Cancel2
Decrease speed
Display
Set speed Full-speed Range Dynamic Radar
Cruise Control vehicle-to-vehicle distance button
Indicators

35
A%+645I/( %I45A/$&
To change the vehicle-to-
vehicle distance

Push the “
” button
to cycle through the
settings, which will change
progressively.
This mode employs a radar sensor to detect the presence of a preceding v\
ehicle
uQ to aQQroYimateMy  ft  m
ahead, determines the current vehicMetovehicMe
following distance and operates to maintain a preset following distance \
from the
vehicle ahead. These distances vary based on vehicle speed.
(1) (2) (3)

Constant speed cruising when there are no vehicles ahead
The vehicle travels at the speed set by the driver. The desired vehicle-\
to-
vehicle distance can also be set by operating the vehicle-to-vehicle dis\
tance
control.

Deceleration cruising and follow-up cruising when a preceding vehicle
driving slower than the set speed appears 8hen a vehicMe is detected running ahead of you, the system automaticaMMy
decelerates your vehicle. When a greater reduction in vehicle speed is
necessary, the system aQQMies the CraLes the CraLe Mights wiMM come on at this
time
. 5he system wiMM resQond to changes in the sQeed of the vehicMe ahead
in order to maintain the vehicle-to-vehicle distance set by the driver. \
A warning
tone warns you when the system cannot decelerate sufficiently to prevent\
your
vehicle from closing in on the vehicle ahead.
Note: Vehicle-to-vehicle distance will close in when traveling on long downhill
slopes.
LONG
(default setting)MIDDLE SHORT
Preceding
vehicle mark
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES

39
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Safety Connect® (if equipped)
Safety Connect® is a subscription-based telematics service that uses Global
1ositioning 4ystem (14
data and emCedded ceMMuMar technoMogy to Qrovide safety
and security features to subscribers. Safety Connect
® is supported by Toyota’s
designated resQonse center, which oQerates  hours Qer day,  days Qer weeL.
4ervices for suCscriCers incMude Automatic coMMision notification, 4toMen vehicMe
Mocation, &mergency assistance Cutton and &nhanced roadside assistance.
Contact your dealer for more information about Safety Connect
®.
Microphone
LED Indicators “SOS” button
Tire Pressure Monitoring (warning) System (TPMS)
The tire pressure detected by the tire pressure warning system can
Ce disQMayed on the muMtiinformation disQMay .I%
.
Refer to the load label on the door jamb or the Owner’s Manual for tire inflation
specifications.
If the tire Qressure indicator fMashes for more than  seconds and then remains on,
take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or
changes in tire pressure from natural air leakage. If the system has not been
initialized
recently, setting the tire pressures to factory specifications should
turn off the light.
5he tire Qressure warning system can Ce seMected on iw of the muMti
information disQMay .I%
.
System rest initialization

4eMect iw and them Qush and hoMd iw.

4eMect i5184w and them Qush i
w.

4eMect i4et 1ressurew then Qush and hoMd i
w untiM the warning Might CMinLs
three times.
4.2-inch display 7-inch display