rear view mirror TOYOTA CAMRY HYBRID 2020 Owners Manual (in English)

5
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURESBrake system warning1Malfunction/
Check Engine indicator1
Low Tire Pressure Warning1
Low fuel level warning
Security indicator
Fuel tank door position
READY indicator
Master warning
1,2
Headlight low/high beam
indicators
Turn signal indicator
Pre-Collision System (PCS)
warning light1,2
Lane Departure Alert (LDA) indicator
(white/green/yellow3 indicator)
Slip indicator1,3
Vehicle Stability Control OFF indicator1
Parking brake indicator2
Electric power steering warning1
(red/yellow indicator)
Rear passenger seat belt reminder
indicator Type A
Rear passenger seat belt reminder
indicator Type B
Electric brake hold operated indicator1,2
Electric brake hold standby indicator1
BSM w/Rear Cross Traffic Alert (RCTA)
Indicator4
BSM outside rear view mirror
indicators4
Sport mode driving indicator
ECO MODE indicator
EV drive mode indicator
EV indicator
Low outside temperature indicator
Brake system warning
(yellow indicator)1
Full-Speed Dynamic Radar Cruise
Control (DRCC) indicator/DRCC
SET indicator
Constant speed cruise control
indicator/Constant speed
cruise control SET indicator
Driver’s and
front passenger’s seat belt
reminder (alarm will sound when the
engine switch is in the “IGNITION ON”
mode)
1 If the indicator does not turn off within a few seconds of starting the \
Hybrid System, there may be a
malfunction. Have the vehicle inspected by your Toyota dealer.
2 If the indicator flashes, there may be a malfunction. Refer to the Owner\
’s Manual.3 If the indicator flashes, it indicates that the system is operating.4 If equipped.

16
FEATURES & OPERATIONSAir conditioning/heating
Temperature selector
(driver side)
Temperature selector
(driver side)
Automatic climate control ON -
Adjusting the temperature setting
will cause the airflow vents, air intake
and fan to adjust automatically to set
temperature.
Automatic climate control ON -
Adjusting the temperature setting
will cause the airflow vents, air intake
and fan to adjust automatically to set
temperature.
“SYNC” button - Indicator ON: Synchronized
temperature settings for driver and pas-
sengers. Indicator OFF: Separate temperature
settings for driver and passengers.
“SYNC” button - Indicator ON: Synchronized
temperature settings for driver and pas-
sengers. Indicator OFF: Separate temperature
settings for driver and passengers.
Airflow mode display
Airflow mode display
Airflow vent mode - In “
” or “”
mode, use outside air (“” indicator
OFF) to reduce window fogging.
Airflow vent mode - In “
” or “”
mode, use outside air (“” indicator
OFF) to reduce window fogging. Temperature selector
(passenger side)
Temperature selector
(passenger side)
“S-FLOW” mode
“S-FLOW” mode
Recirculate cabin air
(outside air when OFF)
Recirculate cabin air
(outside air when OFF)
Outside rearview mirror
(if equipped)/Rear defogger
Outside rearview mirror
(if equipped)/Rear defogger
Climate control OFF
Climate control OFF
Air Conditioning ON/OFF
Air Conditioning ON/OFF
Fan speedFan speed
Windshield airflow/defogger
Windshield airflow/defogger
Type A
Type B

18
FEATURES & OPERATIONS
Blind Spot Monitor with Rear Cross
Traffic Alert (BSM w/RCTA)
(if equipped)
Indicators
Indicators
RCTA function display Buzzer (RCTA only)
Outside rear view mirror indicators
The Blind Spot Monitor is a system that has two functions:
• The Blind Spot Monitor function (assists the driver in decision-making when to
change lanes)
• The Rear Cross Traffic Alert function (assists the driver when backing up)
The system is designed to use radar sensors to detect vehicles traveling\
in the Camry
HV’s blind spot. If a vehicle is detected, the driver will be alerted\
via the outside rear
view side mirror indicators.
Rear Cross Traffic Alert function:
While in reverse, when a vehicle approaching from the right or left rear\
of the vehicle
is detected, the outside rear view mirror indicators flash.
Refer to the Owner’s Manual for limitations and more details on this \
system before
attempting to use it.

28
Quick overview-Toyota Safety Sense™ P (TSS-P)
Sensors
TSS-P combines an in-vehicle camera mounted in front of the inside rear \
view mirror
and a millimeter-wave radar mounted in the front grille. These sensors s\
upport the
driver assist systems.
TOYOTA SAFETY SENSE™
Toyota Safety Sense™ P (TSS-P) is a set of active safety technologies designed
to help mitigate or prevent collisions across a wide range of traffic si\
tuations, in
certain conditions. TSS-P is designed to help support the driver’s aw\
areness,
decision making and vehicle operation contributing to a safe driving exp\
erience.
Refer to the Owner’s Manual for operation, setting adjustments, limitations and
more details to understand these functions and complete safety precautions. For
more information, please go to http://www.toyota.com/safety-sense
Lane Departure Alert with Steering Assist (LDA w/SA)
LDA w/SA is designed to provide notification when the system detects an \
unintended lane departure.
The Steering Assist function is designed to provide small corrective
steering inputs to the steering wheel for a short period of time to help\

keep the vehicle in its lane.
Automatic High Beams (AHB)
AHB is designed to detect the headlights of oncoming vehicles and the
tail lights of preceding vehicles and switch between high beams and low \
beams as appropriate.
Pre-Collision System with Pedestrian Detection (PCS w/PD)
PCS w/PD is designed to provide alert, mitigation, and/or avoidance
support in certain conditions, when the system detects a potential
collision with a preceding vehicle is likely to occur.
The advanced millimeter-wave radar sensor system is designed to
work with the camera sensor to help recognize a preceding pedestrian,
and provide an alert, mitigation and/or avoidance support in certain
conditions.
Full-Speed Range Dynamic Radar Cruise Control (DRCC)
DRCC is designed to help maintain a pre-set distance to a preceding
vehicle when the preceding vehicle is traveling at a lower speed.
Camera sensor
Radar sensor