molding TOYOTA CELICA 1998 Owners Manual

CELICA U
17
—Lowering the convertible top
LOWERING THE CONVERTIBLE TOP
The ignition switch must be in the ”ON”
position to operate the convertible top.1. Lower all the side windows, quarter windows, and sun visors. Then pull
the latch handles fully backward.
Before operating, make sure the manual
control switch is not in the ”MANUAL”
position. (See ”If the convertible top does
not raise or lower” in Part 4.)2. Push and hold the convertible top control switch on the ”OPEN” side
until the convertible top is complete-
ly lowered. Raise the sun visors.INSTALLING THE TOP BOOT
The top boot is used to cover and conceal
the completely lowered convertible top. It
is in the trunk, and is stored in a plastic
bag.
3. Place the top boot over the lowered convertible top. Then tuck its outer
edge under the body moldings.
ProCarManuals.com

CELICA U
19
2. Release the top boot snaps from thequarter trim.3. Pull out the outer edge of the topboot from under the body moldings.
Put the removed top boot in the plastic
bag and store it in the trunk.RAISING THE CONVERTIBLE TOP
The ignition switch must be in the ”ON”
position to operate the convertible top. 4. Lower the sun visors. Check that all the side windows and quarter win-
dows are lowered. Then push and
hold the convertible top control
switch on the ”CLOSE” side until
the top touches the windshield
frame.
ProCarManuals.com