torque TOYOTA COROLLA 2021 Owners Manual (in English)
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 2021, Model line: COROLLA, Model: TOYOTA COROLLA 2021Pages: 624, PDF Size: 20.3 MB
Page 538 of 624

5388-2. Steps to take in an emergency
COROLLA_U
5Assemble the jack handle 
extension.
Ty p e A
Ty p e  B
6 Raise the vehicle until the tire 
is slightly raised off the 
ground.
7 Remove all the wheel nuts 
and the tire.
When resting the tire on the 
ground, place the  tire so that the 
wheel design faces up to avoid  scratching the wheel surface.
WA R N I N G
■Replacing a flat tire
●Do not touch the disc wheels or 
the area around the brakes 
immediately after the vehicle 
has been driven. After the vehi-
cle has been driven the disc 
wheels and the area around the 
brakes will be extremely hot. 
Touching these areas with 
hands, feet or oth
er body parts 
while changing a tire, etc. may 
result in burns.
●Failure to follow these precau-
tions could cause the wheel 
nuts to loosen and the tire to fall 
off, resulting in  death or serious 
injury.
• Have the wheel  nuts tightened 
with a torque wrench to 76 ft•lbf 
(103 N•m, 10.5 kgf•m) as soon 
as possible after changing 
wheels.
• Do not attach a  heavily dam-
aged wheel ornament, as it may 
fly off the wheel while the vehi-
cle is moving.
• When installing a tire, only use  wheel nuts that  have been spe-
cifically designed for that wheel. 
Page 539 of 624

5398-2. Steps to take in an emergency
8
When trouble arises
COROLLA_U
1Remove any dirt or foreign 
matter from the wheel con-
tact surface.
If foreign matter is on the wheel 
contact surface,  the wheel nuts 
may loosen while the vehicle is in 
motion, causing the tire to come off.
2 Install the tire and loosely 
tighten each wheel nut by 
hand by approximately the 
same amount.
When replacing a steel wheel with 
a steel wheel (including a compact 
spare tire), tighte n the wheel nuts 
until the tapered portion   comes 
into loose contact with the disc  wheel seat  .
When replacing an aluminum wheel 
with a steel wheel (including a com-
pact spare tire), tighten the wheel 
nuts until the tapered portion   
comes into loose c
ontact with the 
disc wheel seat  .
3 Lower the vehicle.
4 Firmly tighten each wheel nut 
two or three times in the 
order shown in the illustra-
tion.
Tightening torque:
WA R N I N G
 
Page 564 of 624

5649-1. Specifications
COROLLA_U
*1: Minimum pedal clearance when depressed with a force of 67.4 lbf (300 
N, 30.6 kgf) while the  engine is running.
*2: If equipped
*3: Parking brake lever travel when pulled up with a force of 45.0  lbf (200 N, 
20.4 kgf)
*4: Make sure to confirm that the brake system warning light (yell ow) does 
not illuminate. (If th e brake system warning light illuminates,  refer to 
P.511.)
Ty p e A
Parking brake indicator*4
When pulling th e parking brake switch for 
1 to 2 seconds: comes on
When pushing the parking brake switch for 
1 to 2 seconds: turns off
Fluid typeFMVSS No.116 DOT  3 or SAE J1703
FMVSS No.116 DOT  4 or SAE J1704
Steering
Free playLess than 1.2 in. (30 mm)
Tires and wheels
Tire size195/65R15 91S, T125/70D17 98M
Tire inflation pressure
(Recommended cold tire 
inflation pressure)
Front
38 psi (260 kPa, 2.6 kgf/cm
2 or bar)
Rear
36 psi (250 kPa, 2.5 kgf/cm
2 or bar)
Spare
60 psi (420 kPa, 4.2 kgf/cm
2 or bar)
Wheel size15   6 1/2J, 17   4T (compact spare)
Wheel nut torque76 ft•lbf (103 N•m, 10.5 kgf•m) 
Page 565 of 624

5659-1. Specifications
9
Vehicle specifications
COROLLA_U
Ty p e  B
Ty p e  C
Ty p e  D
Tire size205/55R16 91H, T125/70D17 98M
Tire inflation pressure
(Recommended cold tire 
inflation pressure)
Front
35 psi (240 kPa, 2.4 kgf/cm
2 or bar)
Rear
33 psi (230 kPa, 2.3 kgf/cm
2 or bar)
Spare
60 psi (420 kPa, 4.2 kgf/cm
2 or bar)
Wheel size16   7J, 17   4T (compact spare)
Wheel nut torque76 ft•lbf (103 N•m, 10.5 kgf•m)
Tire size225/40R18 88V, T125/70D17 98M
Tire inflation pressure
(Recommended cold tire 
inflation pressure)
Front
33 psi (230 kPa, 2.3 kgf/cm
2 or bar)
Rear
30 psi (210 kPa, 2.1 kgf/cm
2 or bar)
Spare
60 psi (420 kPa, 4.2 kgf/cm
2 or bar)
Wheel size18   8J, 17   4T (compact spare)
Wheel nut torque76 ft•lbf (103 N•m, 10.5 kgf•m)
Tire size195/65R15 91S
Tire inflation pressure
(Recommended cold tire 
inflation pressure)
Front
38 psi (260 kPa, 2.6 kgf/cm
2 or bar)
Rear
36 psi (250 kPa, 2.5 kgf/cm
2 or bar)
Spare
None
Wheel size15   6 1/2J
Wheel nut torque76 ft•lbf (103 N•m, 10.5 kgf•m) 
Page 566 of 624

5669-1. Specifications
COROLLA_U
Ty p e  E
Ty p e  F
Tire size205/55R16 91H
Tire inflation pressure
(Recommended cold tire 
inflation pressure)
Front
35 psi (240 kPa, 2.4 kgf/cm
2 or bar)
Rear
33 psi (230 kPa, 2.3 kgf/cm
2 or bar)
Spare
None
Wheel size16   7J
Wheel nut torque76 ft•lbf (103 N•m, 10.5 kgf•m)
Tire size225/40R18 88W, T125/70D17 98M
Tire inflation pressure
(Recommended cold tire 
inflation pressure)
Front
33 psi (230 kPa, 2.3 kgf/cm
2 or bar)
Rear
30 psi (210 kPa, 2.1 kgf/cm
2 or bar)
Spare
60 psi (420 kPa, 4.2 kgf/cm
2 or bar)
Wheel size18   8J, 17   4T (compact spare)
Wheel nut torque76 ft•lbf (103 N•m, 10.5 kgf•m)
Light bulbs
Light bulbsBulb No.WTy p e
Exterior
Front side marker lights—5A
Front turn signal /parking lights 
(vehicles without side turn signal 
lights)
7444NA28/8B
Rear side marker lights (bulb 
type)—5A
Rear turn signal lights—21B
Back-up lights—16A