engine TOYOTA COROLLA HATCHBACK 2019 (in English) User Guide
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 2019, Model line: COROLLA HATCHBACK, Model: TOYOTA COROLLA HATCHBACK 2019Pages: 56, PDF Size: 5.71 MB
Page 16 of 56

14
Windows-Power
All Window Auto Up/Down  Push the switch completely down or pull it completely 
up and release to fully open or close. To stop the window partway, opera\
te the switch 
in the opposite direction.
Window lock switch Deactivates all passenger windows. Driver’s window remains 
operable. 
Up
Down
Indicator
Driver sideWindow lock switch
Hold wheel, push lever down, set angle and return lever.
NOTE: Do not attempt to adjust while the vehicle is in motion.
FRONTREAR
The green indicator light on the engine switch will flash and a message \
will be 
shown on the multi-information display. Press the engine switch while tu\
rning the 
steering wheel left and right.
FRONT
FEATURES & OPERATIONS
Unlock
Lock
Door locks
Bottle holders
2019_Corolla_HB_QRG_V5_0516.indd   145/17/18   11:12 PM 
Page 17 of 56

15
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
All Window Auto Up/Down  Push the switch completely down or pull it completely 
up and release to fully open or close. To stop the window partway, opera\
te the switch 
in the opposite direction.
Window lock switch Deactivates all passenger windows. Driver’s window remains 
operable. 
Tilt & telescopic steering wheel
Hold wheel, push lever down, set angle and return lever.
NOTE: Do not attempt to adjust while the vehicle is in motion.
Lock release lever
REAR
Steering lock release
The green indicator light on the engine switch will flash and a message \
will be 
shown on the multi-information display. Press the engine switch while tu\
rning the 
steering wheel left and right.
Turn
FRONT
REAR
Cup holders
Angle
Length
Door locks
2019_Corolla_HB_QRG_V5_0516.indd   155/17/18   11:12 PM 
Page 20 of 56

18
Audio
FEATURES & OPERATIONS
ENTUNE™ 3.0 AUDIO PLUS
ENTUNE™ 3.0 AUDIO
ENTUNE™ 3.0 PREMIUM AUDIO, WITH APP SUITE AND DYNAMIC  
NAVIGATION
NOTE: Concentrating on the road should always be your first priority while 
driving. Do not use the Entune system if it will distract you.
Visually match your vehicle’s Entune
TM 3.0 audio system to one featured in 
this guide for the most accurate information.
Refer to the “Navigation System Owner’s Manual” or visit www.toyota.\
com/entune 
for additional audio/multimedia resources.
Touch screen display
Access  
AUDIO screen
Push to turn ON/OFF or 
turn to adjust volume Turn to tune radio stations 
manually or select tracks or filesAccess  
Bluetooth  
hands-free system
Seek 
station/CD 
track select
Access  
HOME screen
Access  
MENU screen
Access
APPS screen
Access  
MAP screen
A mobile device can be charged wirelessly on the tray. (1) Press the wi\
reless 
charger power switch and the green operation indicator light turns on. (2) Pl\
ace a 
mobile device on the tray as shown in the illustration. An amber indicator ill\
uminates 
while charging is in progress. When charging is complete, the indicator illum\
inates 
green. Some phones, cases or cover type wireless chargers may not cause the 
green indicator to illuminate even though it is fully charged.
Refer to the Owner‘s Manual for more details on this system before attempt\
ing to 
use it.
Operation indicator light
USB charge-port
(Charge-only)
The “ENGINE START STOP” switch must be in the ACCESSORY or IGNITION O\
N 
mode for use.
2019_Corolla_HB_QRG_V5_0516.indd  185/17/18  11:12 PM 
Page 21 of 56

19
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Audio
ENTUNE™
 3.0 AUDIO PLUS
ENTUNE™ 3.0 AUDIO
ENTUNE™ 3.0 PREMIUM AUDIO, WITH APP SUITE AND DYNAMIC  
NAVIGATION
NOTE: Concentrating on the road should always be your first priority while 
driving. Do not use the Entune system if it will distract you.
Visually match your vehicle’s Entune
TM 3.0 audio system to one featured in 
this guide for the most accurate information.
Refer to the “Navigation System Owner’s Manual” or visit www.to\
yota.com/entune 
for additional audio/multimedia resources.
Turn to tune radio stations 
manually or select tracks or files Access  
Bluetooth  
hands-free system
Seek 
station/CD 
track select
Access
APPS screen
Wireless charger (if equipped)
A mobile device can be charged wirelessly on the tray. (1) Press the w\
ireless 
charger power switch and the green operation indicator light turns on. (\
2) Place a 
mobile device on the tray as shown in the illustration. An amber indicat\
or illuminates 
while charging is in progress. When charging is complete, the indicator \
illuminates 
green. Some phones, cases or cover type wireless chargers may not cause \
the 
green indicator to illuminate even though it is fully charged.
Refer to the Owner‘s Manual for more details on this system before at\
tempting to 
use it.
Power switch
Charge area
Operation indicator light
Press
When the engine is turned off, the last state (ON/
OFF) of the charger is memorized.
Place device nearest the center of charging area for 
best results. Moving device may result in stopping 
or restarting the charging process.
Place
(1)
(2)
USB charge-port
Power outlet
The “ENGINE START STOP” switch must be in the ACCESSORY or IGNITIO\
N ON 
mode for use.
2019_Corolla_HB_QRG_V5_0516.indd   195/17/18   11:12 PM 
Page 22 of 56

20
FEATURES & OPERATIONS
USB media/AUX port 
USB media port
By connecting a USB-compatible portable audio device or USB memory stick\
 into 
the USB media port, you can listen to music through the vehicle’s spe\
aker system.
AUX port
By inserting an AUX cable into the AUX port, you can listen to music fro\
m a 
portable audio device through the vehicle’s speaker system while in A\
UX mode.
WITHOUT DUAL AIR CONDITIONING SYSTEM
WITH DUAL AIR CONDITIONING SYSTEM
Automatic climate control ON
Adjusting the temperature setting 
will cause the airflow vents, 
air intake and fan to adjust 
automatically.
Automatic climate control ON
Adjusting the temperature setting 
will cause the airflow vents, 
air intake and fan to adjust 
automatically.
Seat heaters (if equipped)
The engine switch must be in the “IGNITION ON” mode.
AUX port
2019_Corolla_HB_QRG_V5_0516.indd   205/17/18   11:12 PM 
Page 23 of 56

21
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Air conditioning/heating
USB media port
By connecting a USB-compatible portable audio device or USB memory stick\
 into 
the USB media port, you can listen to music through the vehicle’s spe\
aker system.
AUX port
By inserting an AUX cable into the AUX port, you can listen to music fro\
m a 
portable audio device through the vehicle’s speaker system while in A\
UX mode.
WITHOUT DUAL AIR CONDITIONING SYSTEM
WITH DUAL AIR CONDITIONING SYSTEM
Temperature control
Temperature control 
(driver side) Temperature control 
(passenger side)
Fan speed  
increases/decreases Fan speed
Windshield 
airflow/defogger
Windshield 
airflow/defogger Air Conditioning 
ON/OFF
Air Conditioning 
ON/OFF
Climate control OFF
Climate control OFF Eco air 
conditioning mode
Eco air 
conditioning mode
Automatic climate control ON
Adjusting the temperature setting 
will cause the airflow vents, 
air intake and fan to adjust 
automatically.
Automatic climate control ON
Adjusting the temperature setting 
will cause the airflow vents, 
air intake and fan to adjust 
automatically.
Airflow vent mode
Airflow vent mode
Outside rearview 
mirror/Rear defogger
Outside rearview 
mirror/Rear defogger Recirculate cabin air 
(outside air when OFF)
Recirculate cabin air 
(outside air when OFF)Outside air
Outside air
Seat heaters (if equipped)
The engine switch must be in the “IGNITION ON” mode.
“SYNC” button
Indicator ON: Synchronized 
temperature settings for 
driver’s and front passenger’s 
seat. 
Indicator OFF: Separate 
temperature settings for 
driver’s and front passenger’s 
seat.
2019_Corolla_HB_QRG_V5_0516.indd   215/17/18   11:12 PM 
Page 28 of 56

26
CHANGING PRE-COLLISION ALERT TIMINGPRE-COLLISION SYSTEM (CONTINUED)
DISABLING PRE-COLLISION SYSTEM (PCS)
Each time the PCS switch is pressed, the response to the PCS alert timin\
g changes.
TOYOTA SAFETY SENSE™
Refer to the Toyota Owner’s Manual for additional information on PCS \
operation, 
settings adjustments, limitations, and precautions before attempting to \
use it. Pre-Collision Braking
If the driver does not brake in a set time and the system determines tha\
t the possibility 
of a frontal collision with a preceding vehicle is extremely high, the s\
ystem may 
automatically apply the brakes, reducing speed in order to help the driv\
er reduce the 
impact and in certain cases avoid the collision.
Monocular camera sensorMillimeter
wave radar
As part of the Pre-Collision System, this function is also designed to f\
irst provide an 
alert and then automatic braking if needed.In certain conditions, the PCS system included with the TSS package may \
also 
help to detect a pedestrian or bicyclist in front of your vehicle. With \
Toyota Safety 
Sense™, PCS uses an in-vehicle camera and front-grill mounted millime\
ter-wave 
radar to help detect a pedestrian or bicyclist in front of your vehicle \
in certain 
conditions. The in-vehicle camera of PCS detects a potential pedestrian \
or bicyclist 
based on size, profile, and motion of the detected pedestrian or bicycli\
st. However, 
a pedestrian or bicyclist may not be detected depending on the condition\
s, 
including the surrounding brightness and the motion, posture, size, and \
angle of 
the potential detected pedestrian or bicyclist, preventing the system fr\
om operating 
or engaging. Refer to a Toyota Owner’s Manual for additional information.
PCS PEDESTRIAN DETECTION
(1) Press “ ” switches and select  from the Multi-Information Display (MID).  
(2) Press “ ” switches and select 
 from the MID and then press  
“”. The setting screen is displayed.
(3) Press “
” each time to change the setting. Each time it is pressed, the 
response to the PCS alert timing changes as shown above. You can press “\
” to 
go back to the menu.
Note: PCS is enabled each time the engine switch is turned to Ignition On. 
The system can be disabled/enabled and the alert timing of the system can be 
changed. (Alert timing only, brake operation remains the same).
(1) Press “ ” switches and select 
 from the Multi-Information Display (MID).  
(2) Press “ ” and “
” switches to change the setting.
(3) Press “
” to go back to the menu.
Note: The system is enabled each time the power switch is turned to ON 
mode.
Refer to a Toyota Owner’s Manual for additional information on PCS op\
eration, 
settings adjustments, limitations, and precautions before attempting to \
use it.
2019_Corolla_HB_QRG_V5_0516.indd   265/17/18   11:12 PM 
Page 29 of 56

27
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
CHANGING PRE-COLLISION ALERT TIMING
DISABLING PRE-COLLISION SYSTEM (PCS)
Each time the PCS switch is pressed, the response to the PCS alert timin\
g changes.
Far Middle
(default) Near
Refer to the Toyota Owner’s Manual for additional information on PCS \
operation, 
settings adjustments, limitations, and precautions before attempting to \
use it. Pre-Collision Braking
If the driver does not brake in a set time and the system determines tha\
t the possibility 
of a frontal collision with a preceding vehicle is extremely high, the s\
ystem may 
automatically apply the brakes, reducing speed in order to help the driv\
er reduce the 
impact and in certain cases avoid the collision.
As part of the Pre-Collision System, this function is also designed to f\
irst provide an 
alert and then automatic braking if needed. In certain conditions, the PCS system included with the TSS package may \
also 
help to detect a pedestrian or bicyclist in front of your vehicle. With \
Toyota Safety 
Sense™, PCS uses an in-vehicle camera and front-grill mounted millime\
ter-wave 
radar to help detect a pedestrian or bicyclist in front of your vehicle \
in certain 
conditions. The in-vehicle camera of PCS detects a potential pedestrian \
or bicyclist
 
based on size, profile, and motion of the detected pedestrian or bicycli\
st. However, 
a pedestrian or bicyclist may not be detected depending on the condition\
s, 
including the surrounding brightness and the motion, posture, size, and \
angle of 
the potential detected pedestrian or bicyclist, preventing the system fr\
om operating 
or engaging. Refer to a Toyota Owner’s Manual for additional information.
(1) Press “” switches and select  from the Multi-Information Display (MID).  
(2) Press “
” switches and select  from the MID and then press  
“
”. The setting screen is displayed.
(3) Press “
” each time to change the setting. Each time it is pressed, the 
response to the PCS alert timing changes as shown above. You can press “\
” to 
go back to the menu.
Note: PCS is enabled each time the engine switch is turned to Ignition On. 
The system can be disabled/enabled and the alert timing of the system can be 
changed. (Alert timing only, brake operation remains the same).
(1) Press “
” switches and select  from the Multi-Information Display (MID).  
(2) Press “
” and “” switches to change the setting.
(3) Press “
” to go back to the menu.
Note: The system is enabled each time the power switch is turned to ON 
mode.
Refer to a Toyota Owner’s Manual for additional information on PCS op\
eration, 
settings adjustments, limitations, and precautions before attempting to \
use it.
2019_Corolla_HB_QRG_V5_0516.indd   275/17/18   11:12 PM 
Page 40 of 56

38
TOYOTA SAFETY SENSE™
SWITCHING TO CONSTANT SPEED (CRUISE) CONTROL MODE
SETTING CONSTANT SPEED (CRUISE) CONTROL
Note: When your vehicle is too close to a vehicle ahead, and sufficient automatic 
deceleration via the cruise control is not possible, the display will flash and the 
buzzer will sound to alert the driver. An example of this would be if another driver 
cuts in front of you while you are following a vehicle. Depress the brake pedal to 
ensure an appropriate vehicle-to-vehicle distance.
If you are already using DRCC “”, push ON-OFF button to turn the system off 
first, then push and hold ON-OFF button for at least 1.5 seconds to swit\
ch.
Note: When the engine is turned off, it will automatically default to DRCC.
Refer to a Toyota Owner’s Manual for additional information on DRCC o\
peration, 
settings adjustments, limitations, and precautions before attempting to \
use it.
1.5 seconds
Set
(3)  Acceleration when there are no longer any preceding vehicles driving    
     slower than the set speed The system accelerates until the set speed is reached. The system then
returns to constant speed cruising.
To adjust speed or cancel, see steps (2) and (3) of ADJUSTING SPEED on 
page 36.
ADJUSTING DISTANCE (CONTINUED)
ACTIVATING THE AHB SYSTEM
CONDITIONS WHERE AHB WILL TURN ON/OFF AUTOMATICALLY
When all of these conditions are met, high beams will be automatically t\
urned on 
(after approximately 1 second):
• Vehicle speed is above approximately 21 mph (34 km/h).
• The area ahead of the vehicle is dark.
• There are no oncoming or preceding vehicles with headlights or tail lights turned 
on.
• There are few streetlights on the road ahead.
If any of these conditions occur, high beams will be automatically turne\
d off:
• Vehicle speed drops below approximately 17 mph (27 km/h).
• The area ahead of the vehicle is not dark.
• Oncoming or preceding vehicles have headlights or tail lights turned on.
• There are many streetlights on the road ahead.
AHB is a safety system designed to help drivers see more of what’s ah\
ead at nighttime 
without and reduce glare for oncoming drivers, AHB uses an in-vehicle ca\
mera to 
help detect the headlights of oncoming vehicles and tail lights of prece\
ding vehicles, 
then automatically switches between high and low beams as appropriate to\
 provide 
the most light possible and enhance forward visibility. By using high be\
ams more 
frequently, the system may allow earlier detection of pedestrians and ob\
stacles.
Refer to the Toyota Owner’s Manual for additional information on AHB \
operation, 
settings adjustments, limitations, and precautions before attempting to \
use it.
(1) Press the “” switch.
(2) Push lever away from you with the headlight switch is in the “
” or “AUTO” 
position.
(3) Press the “
” switch.
The AHB indicator will come on when the headlights are turned on automat\
ically 
to indicate that the system is active.
Note: Pull the lever back toward you or press the AHB switch to turn the AHB 
system off.
The AHB indicator will turn off. To turn switch to “
” position and the manual 
high beam indicator “
” turns on.
2019_Corolla_HB_QRG_V5_0516.indd   385/17/18   11:12 PM 
Page 41 of 56

39
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Note: When your vehicle is too close to a vehicle ahead, and sufficient automatic 
deceleration via the cruise control is not possible, the display will flash and the 
buzzer will sound to alert the driver. An example of this would be if another driver 
cuts in front of you while you are following a vehicle. Depress the brake pedal to 
ensure an appropriate vehicle-to-vehicle distance.
If you are already using DRCC “”, push ON-OFF button to turn the system off 
first, then push and hold ON-OFF button for at least 1.5 seconds to swit\
ch.
Note: When the engine is turned off, it will automatically default to DRCC.
Refer to a Toyota Owner’s Manual for additional information on DRCC o\
peration, 
settings adjustments, limitations, and precautions before attempting to \
use it. (3) 
Acceleration when there are no longer any preceding vehicles driving    
     slower than the set speed The system accelerates until the set speed is reached. The system then
returns to constant speed cruising.
To adjust speed or cancel, see steps (2) and (3) of ADJUSTING SPEED on 
page 36.
Automatic High Beams (AHB)
ACTIVATING THE AHB SYSTEM
CONDITIONS WHERE AHB WILL TURN ON/OFF AUTOMATICALLY
When all of these conditions are met, high beams will be automatically t\
urned on 
(after approximately 1 second):
• Vehicle speed is above approximately 21 mph (34 km/h).
• The area ahead of the vehicle is dark.
• There are no oncoming or preceding vehicles with headlights or tail lights turned 
on.
• There are few streetlights on the road ahead.
If any of these conditions occur, high beams will be automatically turne\
d off:
• Vehicle speed drops below approximately 17 mph (27 km/h).
• The area ahead of the vehicle is not dark.
• Oncoming or preceding vehicles have headlights or tail lights turned on.
• There are many streetlights on the road ahead.
AHB is a safety system designed to help drivers see more of what’s ah\
ead at nighttime 
without and reduce glare for oncoming drivers, AHB uses an in-vehicle ca\
mera to 
help detect the headlights of oncoming vehicles and tail lights of prece\
ding vehicles, 
then automatically switches between high and low beams as appropriate to\
 provide 
the most light possible and enhance forward visibility. By using high be\
ams more 
frequently, the system may allow earlier detection of pedestrians and ob\
stacles.
Refer to the Toyota Owner’s Manual for additional information on AHB \
operation, 
settings adjustments, limitations, and precautions before attempting to \
use it.
(2) (1) 
(1) Press the “
” switch.
(2) Push lever away from you with the headlight switch is in the “
” or “AUTO” 
position.
(3) Press the “
” switch.
The AHB indicator will come on when the headlights are turned on automat\
ically 
to indicate that the system is active.
Note: Pull the lever back toward you or press the AHB switch to turn the AHB 
system off.
The AHB indicator will turn off. To turn switch to “
” position and the manual 
high beam indicator “
” turns on.
2019_Corolla_HB_QRG_V5_0516.indd   395/17/18   11:12 PM