TOYOTA DYNA 100/150 2012 Owners Manual (in English)

DO−IT−YOURSELF MAINTENANCE: Electrical components215
3. Release the bulb retaining spring
and remove the bulb. Install a new
bulb and the bulb retaining spring.
To install a bulb, align the tabs of the
bulb with the cutouts of the mounting
hole.4. Install the rubber cover with the
“TOP” mark upward, and fit it se-
curely on the boss. Plug in the con-
nector.
Make sure the rubber cover fits securely
on the bulb base and the mounting body.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact any authorized Toyota
dealer or repairer, or another duly quali-
fied and equipped professional.
Dyna100/150_EE

216DO−IT−YOURSELF MAINTENANCE: Electrical components
Use a Phillips−head screwdriver.
a: Front turn signal light
b: Front position light
Front of
vehicle
Use a Phillips−head screwdriver.
Dyna100/150_EE
—Front turn signal and front
position lights
—Side turn signal lights

DO−IT−YOURSELF MAINTENANCE: Electrical components217
Use a Phillips−head screwdriver.
a: Rear turn signal light
b: Stop/tail light
c: Back−up light
Use a Phillips−head screwdriver.
a: Rear turn signal light
b: Stop/tail light
c: Back−up light
Dyna100/150_EE
—Rear turn signal, stop/tail
and back−up lights (type A)—Rear turn signal, stop/tail
and back−up lights (type B)

218DO−IT−YOURSELF MAINTENANCE: Electrical components
Use a Phillips−head screwdriver.Use a Phillips−head screwdriver.
Dyna100/150_EE
—Rear fog light —License plate lights

SPECIFICATIONS219
Section 8
SPECIFICATIONS
DDimensions 220.......................................
DWeights 222...........................................
DEngine 223............................................
DFuel 223..............................................
DService specifications 224..............................
DTires 226.............................................
DFuses 227............................................
Dyna100/150_EE

220SPECIFICATIONS
mm (in.)
Model


1Overall lengthOverall widthOverall height
KDY221R−TBMDYW4430 (174.4)1695 (66.7)1975 (77.8)
KDY221R−TBMDYW34345 (171.1)1695 (66.7)1965 (77.4)
2050 (80.7)

2
KDY221L−TBMDYW4430 (174.4)1695 (66.7)1975 (77.8)
KDY221L−TBMDYW34345 (171.1)1695 (66.7)1965 (77.4)
2050 (80.7)

2
KDY231R−TBMGYW34590 (180.7)1900 (74.8)1975 (77.8)
2060 (81.1)

2
KDY231L−TBMGYW34590 (180.7)1900 (74.8)1975 (77.8)
2060 (81.1)

2
KDY231L−PBMEYW34590 (180.7)1900 (74.8)2000 (78.7)
2150 (84.6)
KDY231L−PSMBYW4690 (184.6)1695 (66.7)1985 (78.1)
KDY231L−PSMBYW34590 (180.7)1695 (66.7)1995 (78.5)
2140 (84.3)

2
KDY251R−TBMGYW35905 (232.5)1900 (74.8)1975 (77.8)
2060 (81.1)

2
KDY251L−TBMGYW35905 (232.5)1900 (74.8)1975 (77.8)
2060 (81.1)

2
KDY251L−PBMEYW35905 (232.5)1900 (74.8)2000 (78.7)
2140 (84.3)

2
KDY261L−TBMGYW36475 (254.9)1900 (74.8)1975 (77.8)
2060 (81.1)

2
KDY261L−PBMEYW36475 (254.9)1900 (74.8)2000 (78.7)
2140 (84.3)

2
Dyna100/150_EE
Dimensions

SPECIFICATIONS221
mm (in.)
Model


1Wheel baseFront treadRear tread
KDY221R−TBMDYW2300 (90.6)1435 (56.5)1365 (53.7)
KDY221R−TBMDYW32300 (90.6)1435 (56.5)1365 (53.7)
KDY221L−TBMDYW2300 (90.6)1435 (56.5)1365 (53.7)
KDY221L−TBMDYW32300 (90.6)1435 (56.5)1365 (53.7)
KDY231R−TBMGYW32545 (100.2)1435 (56.5)1500 (59.1)
KDY231L−TBMGYW32545 (100.2)1435 (56.5)1500 (59.1)
KDY231L−PBMEYW32545 (100.2)1435 (56.5)1500 (59.1)
KDY231L−PSMBYW2545 (100.2)1435 (56.5)1365 (53.7)
KDY231L−PSMBYW32545 (100.2)1435 (56.5)1365 (53.7)
KDY251R−TBMGYW33350 (131.9)1435 (56.5)1500 (59.1)
KDY251L−TBMGYW33350 (131.9)1435 (56.5)1500 (59.1)
KDY251L−PBMEYW33350 (131.9)1435 (56.5)1500 (59.1)
KDY261L−TBMGYW33750 (147.6)1435 (56.5)1500 (59.1)
KDY261L−PBMEYW33750 (147.6)1435 (56.5)1500 (59.1)


1: The model code appears on the manufacturer ’s plate or label with the heading “MOD-
EL”.
See “Your Toyota’s identification” on page 128 in Section 2 for the manufacturer ’s
plate or label location.


2: High roof models
Dyna100/150_EE

222SPECIFICATIONS
kg (lb.)
Model
Gross Vehicle
Mass(GVM)
Maximum Permissible Axle
Capacity (MPAC)
ModelMass (GVM)FrontRear
Dyna100
Single cab
3000 (6614)1800(3968)1800(3968)Dyna100

Double cab
3210 (7077)1800(3968)1800(3968)
Dyna 150
3500 (7716)1800 (3968)2550 (5622)
kg (lb.)
ModelDrawbarloadTowing capacityModelDrawbarloadWith brakeWithout brake
Dyna 100
110 (243)2000 (4409)750 (1653)
Dyna 150
115 (254)2200 (4850)750 (1653)

: See “Model code” on page vi in the beginning of this manual if you are not sure of
your vehicle model.
Dyna100/150_EE
Weights

SPECIFICATIONS223
Model:
1KD−FTV
Type:
4 cylinder in line, 4cycle, diesel (with
turbocharger)
Bore and stroke, mm (in.):
96.0×103.0 (3.78×4.06)
Displacement, cm
3(cu. in.):
2982 (182.0)Fuel type:
EU area:
Diesel fuel conforming to European
standard EN590
Except EU area:
Diesel fuel that contains 50 ppm or
less of sulfur and has a cetane num-
ber of 48 or higher
Fuel tank capacity, L (gal., Imp. gal.):
Model

Fuel tank capacity
KDY22160 (15.9, 13.2)
KDY231
KDY25180 (21.1, 17.6)
KDY261

: See “Model code” on page vi in the
beginning of this manual if you are not
sure of your vehicle model.
Dyna100/150_EE
Engine Fuel

224SPECIFICATIONS
ENGINE
Valve clearance (engine cold), mm (in.):
Intake 0.20—0.30 (0.008—0.012)
Exhaust 0.35—0.45 (0.014—0.018)
ENGINE LUBRICATION
Oil capacity (drain andrefill—reference

),
L (qt., Imp. qt.):
With filter 7.0 (7.4, 6.2)
Without filter 6.8 (7.2, 6.0)

: The engine oil capacity is a reference
quantity to be used when exchanging.
Warm up and turn off the engine, wait
more than 5 minutes, and check the oil
level on the dipstick.
“Toyota Genuine Motor Oil” is used in
your Toyota vehicle. Toyota recommends
the use of approved “Toyota Genuine
Motor Oil”. Another motor oil of matching
quality can also be used.
Oil grade:
ACEA C2
NOTICE
Using engine oil other than ACEA C2
may damage the catalytic converter.
Recommended viscosity (SAE):
Temperature range anticipated before
next oil change
Preferred
Please contact any authorized Toyota
dealer or repairer, or another duly quali-
fied and equipped professional, for further
details.
COOLING SYSTEM
Total capacity, L (qt., Imp. qt.):
With front and rear heaters
11.5 (12.2, 10.1)
With front heater 10.7 (11.3, 9.4)
Coolant type:
Your Toyota vehicle is filled with “Toyota
Super Long Life Coolant” at the factory.
In order to avoid technical problems,
only use “Toyota Super Long Life
Coolant” or similar high quality ethylene
glycol based non−silicate, non−amine,
non−nitrite, and non−borate coolant with
long−life hybrid organic acid technology.
(Coolant with long−life hybrid organic
acid technology is a combination of low
phosphates and organic acids.)
Do not use plain water alone.
Please contact any authorized Toyota
dealer or repairer, or another duly quali-
fied and equipped professional, for fur-
ther details.
BATTERY
Specific gravity reading at 20_C(68_F):
1.250—1.290 Fully charged
1.160—1.200 Half charged
1.060—1.100 Discharged
Charging rates:
Quick charge 15 A max.
Slow charge 5 A max.
CLUTCH
Pedal free play, mm (in.):
5—18 (0.2—0.7)
Fluid type:
SAE J1703 or FMVSS No.116 DOT 3
Dyna100/150_EE
Service specifications