roof TOYOTA DYNA 100/150 2012 Owners Manual (in English)

AIR CONDITIONING SYSTEM105
3. Pull out the filter.
After washing with a mild detergent,
rinse and dry.
After cleaning the filter, replace in reverse
order of removal.
INFORMATION
The air conditioning filter should be
installed properly. The use of air con-
ditioning system with the filter re-
moved may cause deteriorated dust-
proof performance and then affect
overall air conditioning system perfor-
mance.
Dyna100/150_EE

CORROSION PREVENTION AND APPEARANCE CARE179
Use mud shields on your wheels.If you
drive on salted or gravel roads, mud
shields help protect your vehicle. Full−size
shields, which come as near to the ground
as possible, are the best. We recommend
that the fittings and the area where the
shields are installed be treated to resist
corrosion. Your authorized Toyota dealer
or repairer, or another duly qualified and
equipped professional, will be happy to
assist in supplyingand installing the
shields if they are recommended for your
area.
Keep your vehicle in a well ventilated
garage or a roofed place. Do not park
your vehicle in a damp, poorly venti-
lated garage.If you wash your vehicle in
the garage, or if you drive it covered with
water or snow, your garage may be so
damp as to cause corrosion. Even if your
garage is heated, a wet vehicle can cor-
rode if the ventilation is poor.Washing your Toyota
Keep your vehicle clean by regular
washing.
The following cases may cause weakness
to the paint or corrosion to the body and
parts. Wash your vehicle as soon as pos-
sible.
DWhen driving in a coastal area
DWhen driving on a road sprinkled with
antifreeze
DWhen exposed to coal tar, tree sap,
bird droppings and carcass of an insect
DWhen driving in areas where there is
a lot of smoke, soot, dust, iron dust or
chemical substances
DWhen the vehicle becomes remarkably
dirty with dust and mud
Hand−washing your Toyota
Work in the shade and wait until the
vehicle body is not hot to the touch.
CAUTION
DWhen cleaning under floor or chas-
sis, be careful not to injure your
hands.
DExhaust gases cause the exhaust
pipe to become quite hot. When
washing the vehicle, be careful not
to touch the pipe until it has cooled
sufficiently, as touching a hot ex-
haust pipe can cause burns.
1. Rinse off loose dirt with a hose. Re-
move any mud or road salt from the
underside of the vehicle or in the
wheel wells.
2. Wash with a mild car−wash soap,
mixed according to the manufacturer ’s
instructions. Use a soft cotton mitt and
keep it wet by dipping it frequently into
the wash water. Do not rub hard—let
the soap and water remove the dirt.
Dyna100/150_EE
Washing and waxing your
To y o t a

SPECIFICATIONS221
mm (in.)
Model


1Wheel baseFront treadRear tread
KDY221R−TBMDYW2300 (90.6)1435 (56.5)1365 (53.7)
KDY221R−TBMDYW32300 (90.6)1435 (56.5)1365 (53.7)
KDY221L−TBMDYW2300 (90.6)1435 (56.5)1365 (53.7)
KDY221L−TBMDYW32300 (90.6)1435 (56.5)1365 (53.7)
KDY231R−TBMGYW32545 (100.2)1435 (56.5)1500 (59.1)
KDY231L−TBMGYW32545 (100.2)1435 (56.5)1500 (59.1)
KDY231L−PBMEYW32545 (100.2)1435 (56.5)1500 (59.1)
KDY231L−PSMBYW2545 (100.2)1435 (56.5)1365 (53.7)
KDY231L−PSMBYW32545 (100.2)1435 (56.5)1365 (53.7)
KDY251R−TBMGYW33350 (131.9)1435 (56.5)1500 (59.1)
KDY251L−TBMGYW33350 (131.9)1435 (56.5)1500 (59.1)
KDY251L−PBMEYW33350 (131.9)1435 (56.5)1500 (59.1)
KDY261L−TBMGYW33750 (147.6)1435 (56.5)1500 (59.1)
KDY261L−PBMEYW33750 (147.6)1435 (56.5)1500 (59.1)


1: The model code appears on the manufacturer ’s plate or label with the heading “MOD-
EL”.
See “Your Toyota’s identification” on page 128 in Section 2 for the manufacturer ’s
plate or label location.


2: High roof models
Dyna100/150_EE