light TOYOTA GR86 2022 (in English) Owner's Guide

842-1. Instrument cluster
2-1.Instrument cluster
For the purpose of explanation, the following illustrations display all warning
lights and indicators illuminated.
Warning lights inform the driver of
malfunctions in the indicated vehi-
cle systems.
War ning lights and indicators
The warning lights and indicators on the instrument cluster and
overhead console inform the driver of the status of the vehicle’s var-
ious systems.
Warning lights and indicators displayed on the instrument
cluster
Warning lights
(red)
Brake system warning light*1
( P.336)
(yellow)
Vacuum pressure system
warning light*1 ( P.336)
(red)
High coolant temperature
warning light*1 ( P.336)
Charging system warning
light*1 ( P.337)
Low engine oil pressure
warning light*1 ( P.337)
Malfunction indicator lamp*1
( P.337)
SRS warning light*1 ( P. 5 3 ,
P.337)
ABS warning light*1 ( P.338)
Electric power steering sys-
tem warning light*1 ( P.338)
Slip indicator*1 ( P.338)

85
2
2-1. Instrument cluster
Vehicle status information and indicators
*1: These lights turn on when the engine
switch is turned to ON to indicate
that a system check is being per-
formed. They will turn off after the
engine is started, or after a few sec-
onds. There may be a malfunction in
a system if a light does not come on,
or turn off. Have the vehicle
inspected by any authorized Toyota
retailer or Toyota authorized repairer,
or any reliable repairer.
*2: The front passenger’s seat belt
reminder light is located on the over-
head console.
*3: This light illuminates on the over-
head console.
The indicators inform the driver of
the operating state of the vehicle’s
various systems.
Automatic transmission fluid
temperature warning light (if
equipped) ( P.339)
Open door warning light
( P.339)
Low fuel level warning light*1
( P.339)
Driver’s and front passen-
ger’s seat belt reminder
light*1, 2 ( P.339)
Rear passengers’ seat belt
reminder lights*1, 3 ( P.340)
(yellow)
Conventional Cruise Control
indicator (if equipped)
( P.340)
BSD/RCTA warning light (if
equipped) ( P.340)
SRH warning light (if
equipped) ( P.340)
RAB warning light (if
equipped) ( P.341)
LED headlight warning light
( P.341)
Automatic headlight leveling
system warning light
( P.341)
Master warning light*1
( P.341)
EyeSight warning light (if
equipped) ( P.341)
Tire pressure warning light*1
( P.342)
GPF system warning light
( P.342)
WA R N I N G
■If a safety system warning light
does not come on
Should a safety syst em light such as the ABS and SRS warning light not
come on when you start the engine,
this could mean that these systems are not available to help protect you in
an accident, which could result in
death or serious injury. Have the vehi- cle inspected by your Toyota dealer
immediately if this occurs.
Indicators
Turn signal indicator
( P.150)
Tail light indicator ( P.153)
Headlight high beam indica-
tor ( P.154)
High beam assist indicator (if
equipped) ( P.156)
Rear fog light indicator
( P.159)
EyeSight temporary stop indi-
cator (if equipped) ( P.223)

862-1. Instrument cluster
Drive mode indicators
Normal mode
TRACK mode
*1: These lights turn on when the engine
switch is turned to ON to indicate
that a system check is being per-
formed. They will turn off after the
engine is started, or after a few sec-
onds. There may be a malfunction in
a system if a light does not come on,
or turn off. Have the vehicle
inspected by any authorized Toyota
retailer or Toyota authorized repairer,
Pre-Collision Braking Sys-
tem OFF indicator*1, 2 (if
equipped) ( P.183)
(white/gre
en)
Conventional Cruise Control
indicator (if equipped)
( P.202, 249)
(white/gre
en)
Adaptive Cruise Control indi-
cator (if equipped) ( P.191)
“READY” indicator (if
equipped) ( P.191)
Lead vehicle indicator (if
equipped) ( P.191)
Lead vehicle indicator*3 (if
equipped) ( P.191)
Your vehicle indicator (if
equipped) ( P.191)
Following distance setting
indicator (if equipped)
( P.191)
Following distance setting
indicator*3 (if equipped)
( P.191)
Lane Departure Warning
OFF indicator*1, 2 (if
equipped) ( P.215)
BSD/RCTA OFF indicator*2
(if equipped) ( P.229)
SRH OFF indicator*2 (if
equipped) ( P.156)
RAB OFF indicator*1, 2 (if
equipped) ( P.241)
(flashes)
Slip indicator*1 ( P.256)
VSC OFF indicator*1, 2
( P.257)
TRC OFF indicator*1, 2
( P.256)
Smart entry & start system
indicator*3 ( P.139)
Hill-start assist control ON
indicator ( P.253)
Security indicator ( P. 7 9 ,
81)
(blue)
Low coolant temperature
indicator*4
Gear Shift indicator ( P.145,
149)
Passenger’s frontal
airbag ON and OFF
indicator*1, 5 ( P. 3 2 )
Low outside temperature
indicator*6 ( P. 8 8 )
Snow mode indicator (if
equipped) ( P.252)
“SPORT” indicator (if
equipped) ( P.252)
Snow mode indicator (if
equipped) ( P.252)
“SPORT” indicator (if
equipped) ( P.252)
“TRACK” indicator
( P.257)
SNOW
SPORT

87
2
2-1. Instrument cluster
Vehicle status information and indicators
or any reliable repairer.
*2: The light comes on when the system
is turned off.
*3: This light illuminates on the
multi-information display.
*4: This indicator turns on when the
engine coolant temperature is low.
*5: This light illuminates on the over-
head console.
*6: When the outside temperature is
approximately 3°C (37°F) or lower,
this indicator will illuminate.

91
2
2-1. Instrument cluster
Vehicle status information and indicators
■Display items
 Odometer
Displays the total distance the vehicle
has been driven.
 Trip meter A/Trip meter B
Displays the distance the vehicle has
been driven since the meter was last
reset. Trip meters A and B can be used
to record and display different distances
independently.
To reset, display th e desired trip meter
and press and hold the display change
button.
When the headlights or front posi-
tion lights are on, the brightness of
the meter and instrument panel
lights can be adjusted using the
instrument panel brightness dial.
1 Brighter
2 Darker
■Instrument panel light brightness adjustment
When the headlights or front position
lights are turned on, the meter and instrument panel lights will be dimmed.
However, if the instrument panel bright-
ness dial is set to the highest position, the lights will not dim even if the head-
lights or front position are turned on.
■Auto dimmer cancel
When the surrounding area is bright, such as during the day, or if the lights
are turned on before necessary, the
automatic dimming function will be can- celled. In this case, the brightness can-
not be adjusted, even if the instrument
panel brightness dial is turned.
■Customization
Some functions can be customized.
( P.377)
The clocks can be adjusted on the
multimedia system screen.
■Setting the clock to be
adjusted automatically
1 Press .
2 Select .
3 Select “General”.
4 Select “Clock”.
5 Select “Time Setting”.
6 Select “Sync With Phone”.
The clock will be set and adjusted
automatically when a smartphone
is connected via Bluetooth®for
transferring phonebook data. For
Changing the instrument
panel light brightness
Adjusting the clock

93
2
2-1. Instrument cluster
Vehicle status information and indicators
( P.183)
Warning or advice pop-up displays
are also displayed in certain situa-
tions.
Engine coolant temperature
( P.88)
Engine oil temperature
Displays the engine oil temperature.
Fastest lap time
Refer to P.97 for the operating method.
Current lap time
Refer to P.97 for the operating method.
■Menu icons
Select a menu icon to display its
content.
*: Displayed when the navigation sys-
tem of Apple CarPlay or Android Auto
is operating. For details, refer to the
“Multimedia owner's manual”.
■Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is
characteristic of liq uid crystal displays,
and there is no problem continuing to use the display.
The multi-information display is
operated using the meter control
switches.
For information pertaining to the
content of each menu icon, refer to
the explanation of each item under
the heading of the relevant menu
icon.
Driving information ( P. 9 4 )
Sport information ( P. 9 5 )
Navigation system-linked dis-
play* ( P. 9 7 )
Audio system-linked display
( P. 9 7 )
Driving suppor t system infor-
mation display (if equipped)
( P. 9 8 )
Driving support system set-
ting display ( P. 9 8 )
A
C
D
Settings display (P. 9 8 )
Warning message display
( P.344)
WA R N I N G
■The multi-information display at
low temperatures
Allow the interior of the vehicle to warm up before using the liquid crys-
tal information display. At extremely
low temperatures, the information dis- play monitor may respond slowly, and
display changes may be delayed.
For example, there is a lag between the driver’s shifting and the new gear
number appearing on the display.
This lag could cause the driver to downshift again, causing rapid and
excessive engine braking and possi-
bly an accident resulting in death or injury.
Changing the meter display

982-1. Instrument cluster
Select to display the operational
status of the Adaptive Cruise Con-
trol system ( P.185, 201)
The settings of the following sys-
tems can be changed.
 LDW (Lane Departure Warning)
(if equipped)
 PCB (Pre-Collision Braking) (if
equipped)
 BSD/RCTA (if equipped)
 RAB (Reverse Automatic Brak-
ing system) (if equipped)
 (Sonar Audible Alarm) (if
equipped)
 SRH (Steering Responsive
Headlight) (if quipped)
■Meter display settings that can
be changed
 Units (if equipped)
Select to change the units of measure
displayed.
 Startup Scrn
Select to enable/disable the startup
screen when the engine switch is
turned to ON.
 GSI (if equipped)
Select to enable/disable the shift posi-
tion indicator and shift-up indicator.
 REV. (REV indicator)
• Select to enable/disable the rev indi-
cator.
• Select to enable/disable the sounding
of a buzzer when the REV indicator is
illuminated.
• Select to set the engine speed at
which the rev indicator (orange) will
begin to be displayed.
■Vehicle functions and settings
that can be changed
 P.377
■Suspension of the settings display
●Some settings cannot be changed while driving. When changing set-
tings, park the vehicle in a safe place.
●If a warning message is displayed,
operation of the settings display will
be suspended.
Driving support system
information display (if
equipped)
Driving support system set-
ting display
Settings display
WA R N I N G
■Cautions during setting up the display
As the engine needs to be running
during setting up the display, ensure that the vehicle is parked in a place
with adequate ventilation. In a closed
area such as a garage, exhaust gases including harmful carbon mon-
oxide (CO) may colle ct and enter the
vehicle. This may lead to death or a serious health hazard.
NOTICE
■While setting up the display
To prevent battery discharge, ensure that the engine is running while set-
ting up the display features.

103
3
3-2. Opening, closing and locking the doors and trunk
Before driving
3-2.Opening, closing and locking the doors and trunk
■Smart entry & start system
Carry the electronic key to enable
this function.
1 Grip the door handle to unlock
the doors.
Vehicles with a double locking system:
Grip the driver’s door handle to unlock
the door. Grip the passenger’s door
handle to unlock both side doors.*
Make sure to touch the sensor on the
back of the handle.
The doors cannot be unlocked for 3
seconds after the doors are locked.
*: The door unlock settings can be
changed.
2 Touch the lock sensor (indenta-
tion on the side of the door han-
dle) to lock the doors.
Check that the door is securely locked.
■Wireless remote control
1 Locks driver’s door*1
Locks both side doors*2
Check that the door is securely locked.
Press and hold to close the windows.*3
2 Unlocks both side door*1
Unlocks both side doors*2
Pressing the button unlocks the driver’s
door. Pressing the button again within 3
seconds unlocks the other doors.*2
Press and hold to open the windows.*3
*1: Vehicles without a double locking
system
*2: Vehicles with a double locking sys-
tem
*3: These settings must be customized
at any authorized Toyota retailer or
Toyota authorized repairer, or any
reliable repairer.
■Side window open/close function linked to door operation
In order to make opening and closing
the doors easier, completely closed win- dows are linked to door operations.
Therefore, when a door is opened, its
window opens slightly. When a door is closed, its window closes completely.
However, if the batt ery has discharged
or is disconnected, this function will not operate. ( P.362)
Doors
Unlocking and locking the
doors from the outside

107
3
3-2. Opening, closing and locking the doors and trunk
Before driving
■Trunk opener switch
Press and hold the trunk opener
switch.
WA R N I N G
●When closing the trunk lid, take
extra care to prevent your fingers
etc. from being caught.
●When closing the trunk lid, make
sure to press it lightly on its outer
surface.
●Do not attach any accessories
other than genuine Toyota parts to the trunk lid. Such additional weight
on the trunk lid may cause the lid to
suddenly shut again after it is opened.
■Trunk lid damper stays
Do not pull on or disassemble the
trunk lid damper stays, or dispose of
them in a fire. Illustrations on the trunk lid damper stays indicate the fol-
lowing:
●: Do not pull
●: Do not disassemble
●: Do not dispose of in fire
●Do not pull on the trunk damper stay to close the trunk, and do not
hang on the trunk damper stay.
Doing so may cause hands to be caught or the trunk damper stay to
break, causing an accident.
NOTICE
■Using the trunk
When closing the trunk lid, do not strongly push down on the trunk lid.
Doing so may dent the trunk lid.
■Trunk damper stays
The trunk lid is equipped with damper
stays that hold the trunk lid in place. Observe the following precautions.
Failure to do so may cause damage
to trunk damper stays, resulting in a malfunction.
●Do not attach any foreign objects such as stickers, plastic sheets and
adhesives to damper stay rods.
●Do not touch damper stay rods with
gloves or other fabric items.
●Do not attach any accessories
other than genuine Toyota parts to
the trunk lid.
●Do not apply lateral force to damper
stays or place your hand on it.
Opening/closing the trunk

1083-2. Opening, closing and locking the doors and trunk
■Smart entry & start system
While carrying the electronic key,
press the button on the trunk lid.
When all of the doors are unlocked,
the trunk lid can be opened while
not carrying an electronic key. How-
ever, as the doors will be locked
when the vehicle is driven (at a
vehicle speed of 5 km/h [3 mph] or
more), the trunk will not be able to
be opened until a door is opened.
■Wireless remote control
Press and hold the switch.
■Trunk light
The trunk light turns on when the trunk
is opened.
■Function to prevent the trunk being
locked with the electronic key inside
●When both side doors are locked, closing the trunk lid with the electronic
key left inside the trunk will sound an
alarm. In this case, the trunk lid can be
opened by pressing the trunk release
button on the trunk lid.
●If the spare electronic key is put in the
trunk with both side doors locked, the key confinement prevention function
is activated so the trunk can be
opened. In order to prevent theft, take all electronic keys with you when leav-
ing the vehicle.
●If the electronic key is put in the trunk
with both side doors locked, the key
may not be detected depending on the location of the key and the sur-
rounding radio wave conditions. In this
case, the key confinement prevention function cannot be activated, causing
the doors to lock when the trunk is
closed. Make sure to check where the
key is before closing the trunk.
●The key confinement prevention func-
tion cannot be activated if either door is unlocked. In this case, open the
trunk using the trunk opener.